Steam or Gravity Non-Programmable Thermostats

Cadet   Btf 240-Volt Mechanical Non-Programmable Thermostat Use with Electric Baseboard 120V-240V

The BTF built-in thermostats provides a convenient way to control a baseboard heater right at the unit. The BTF thermostat was designed to replace the detachable baseboard end plate, so you can install it easily on either end of the baseboard heater and avoid additional wiring.

Cadet   Softheat 240-Volt Mechanical Non-Programmable Thermostat Use with Electric Baseboard 120V-240V

Easy to install and operate, this Cadet SoftHeat baseboard-mount double-pole thermostat provides simple temperature control. Designed exclusively to fit on Cadet EBHN hydronic baseboard heaters, this thermostat can be mounted to either end of the heater and fits seamlessly onto the heater as an endcap. A large, twist-dial knob adjusts smoothly and features a low position and additionally an off setting for added peace of mind.

Cadet   Com-Pak 240-Volt Mechanical Non-Programmable Thermostat Single-Stage Heating and Cooling

Built-in temperature control for your Cadet Com-Pak series wall heater.

HouseWarmer   HouseWarmer Mechanical Non-Programmable Thermostat Single-Stage Heating and Cooling

Simple set-and-forget-it operation.

Honeywell Home   CT30A Heat Only 24-Volt Mechanical Non-Programmable Thermostat

This Honeywell Home economy heat only manual thermostat features a simple analog presentation that is easy to understand. The thermostat allows you to simply adjust the temperature by moving the lever up or down. The thermostat is compatible with oil or gas heating systems to provide low-voltage control of heating equipment. It comes with mounting hardware (wall plate included) and does not require leveling. This thermostat is not compatible with electric baseboard heat, heat pump systems, or multi stage heating/cooling systems.

Dr. Infrared Heater   Mechanical Non-Programmable Thermostat Multi-Stage Heating and Cooling

DR-001 wall thermostat works with single or double poles circuit with voltage inputs from 120-277VAC with 28A maximum power. It can be wired to 3360W-120V, 5824W-208V, 6720W-240V and 7756W-277V heating system with control range of temperature 41F-90F (5-32C). Wall mount design sits flush against wall with large knob allows easy adjustment to all temperatures. Double terminals with OFF position. ETL listing.

Honeywell Home   CT31A Heat/Cool 24-Volt Mechanical Non-Programmable Thermostat Single-Stage Heating and Cooling

This Honeywell Home economy heat/cool manual thermostat features a simple analog presentation that is easy to understand. The thermostat allows you to simply adjust the temperature by moving the lever up or down. The thermostat is compatible with oil or gas heating and cooling systems to provide low-voltage control of heating equipment.

KING   Mechanical Non-Programmable Thermostat Use with Electric Baseboard 120V-240V

The K101 and K102 series thermostats have a larger, more sensitive, mechanical bi-metal sensor that improves temperature accuracy to ± 3° F. this feature achieves a better comfort level with a reduced temperature swing as compared to economy models. Modem appearance with large knob for easy adjustments. No ground wire required, making installation fast and easy. Now that’s smart!

Copeland   24-Volt Electronic Non-Programmable Thermostat Single-Stage Heating and Cooling Multi-Stage Heating and Cooling

The Emerson UNP310 non-programmable thermostat is compatible with single-stage and multi-stage heating, cooling and heat pump systems. The easy DIY setup install wizard guides you through set-up, programming and operation. This thermostat puts control right at your fingertips with its large, easy-to-read backlit display and precise temperature control of plus/minus 1°F. This thermostat does not work with electric baseboard heat and some other systems.

Mr. Heater   Mechanical Non-Programmable Thermostat

Mr. Heater thermostat is compatible with the Big Maxx series of unit heaters.

Honeywell Home   24-Volts Mechanical Non-Programmable Thermostat

The CT51N manual thermostat provides precise temperature control and simple operation. This heating and cooling model works on all central heating and cooling systems excluding heat pumps.

Honeywell Home   CT50K Heat Only 24-Volt Mechanical Non-Programmable Thermostat

This Honeywell Home standard heat only thermostat features a simple design that is easy to understand. The thermostat allows you to simply adjust the temperature by moving the lever side-to-side. It provides low-voltage control of heating equipment.

Honeywell Home   CT53K Heat Only Millivolt 24-Volt Mechanical Non-Programmable Thermostat

This Honeywell Home standard heat only thermostat features a simple design that is easy to understand. The thermostat allows you to simply adjust the temperature by moving the lever side-to-side. Used with 750 millivolt heating systems.

Honeywell Home   CT33A Heat Only Millivolt 24-Volt Mechanical Non-Programmable Thermostat

Life is better when you can keep things simple. With all the complicated things in your life, your thermostat should be easy to use. That’s why Honeywell's economy non-programmable thermostats have a simplistic design and operation … to keep things simple.

Honeywell Home   CT50K1028 Out Building 24-Volt Mechanical Non-Programmable Thermostat Single-Stage Heating and Cooling

Now you can stay warm in garages and out buildings with the CT50K1028 low temperature thermostat. With a low temperature range down to 35 degrees you can economically keep these areas warm.