EASTMAN Appliance Supply Lines & Drain Hoses

EASTMAN   24-in 1-in FIP Inlet x 1-in FIP Outlet Corrugated Stainless Steel Water Heater Connector

The Water-Flex Water Heater Connector by Eastman is a high-quality corrugated stainless steel connector. The deep corrugations of the stainless steel provide long-lasting structural support against crushing, kinking and cracking. This water heater connector is built to last and withstand corrosion. The end connections provide a safe and solid bond that will prevent any disconnects and leaks for many seasons.This connector is Lead-Free compliant for safe water drinking and UPC approved.

EASTMAN   18-in 1-in FIP Inlet x 1-in FIP Outlet Corrugated Stainless Steel Water Heater Connector

The Water-Flex® Water Heater Connector by Eastman® is a high-quality corrugated stainless steel connector. The deep corrugations of the stainless steel provide long-lasting structural support against crushing, kinking and cracking. This 18-inch water heater connector is built to last and withstand corrosion. The 1-inch FIP x 1-inch FIP end connections provide a safe and solid bond that will prevent any disconnects and leaks for many seasons. It has brass nuts with a nickel plated finish. This connector is Lead-Free compliant for safe water drinking and UPC approved.

SharkBite   24-in 3/4 -in PEX barb Inlet x 3/4 -in FIP Outlet Corrugated stainless steel Water heater connector

The 3/4-in PEX barb x 3/4-in FIP x 24-in SharkBite corrugated stainless steel water heater connector allows you to easily connect your hot and cold water supply lines to your water heater. After applying pipe thread tape to the FIP nipples on your water heater, thread the FIP end of the water heater connector onto the tank and tighten with channel locks. Then connect the PEX barb end to 3/4-in PEX pipe with copper crimp rings or stainless steel clamp rings and your water heater is connected.

EASTMAN   2 -Pack 6-ft 3/4 -in FHT Inlet x 3/4 -in FHT Outlet Braided stainless steel Washing machine connector

The Eastman™ Steel-Flex™ 2-Pack Braided Stainless Steel Washing Machine Connectors is designed to provide a secure and reliable connection between your washing machine and water supply. Each 6-foot supply line features a 3/8-inch full-flow high-pressure hose constructed with a durable PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 braided stainless steel exterior, offering superior durability, flexibility, and resistance to leaks, corrosion, kinking, and crimping. These connectors feature 3/4-inch FHT connections, with one end equipped with a 90-degree brass elbow for strain relief and easy installation in tight spaces. Designed to withstand full flow and high pressure, these connectors are built for dependable performance in residential applications. Certified to meet ASME A112.18.6/CSA B125.6 and UPC standards, this pair of washing machine connectors delivers long-lasting quality and peace of mind. Eastman: Made Right. Made to Last. Since 1946.

EASTMAN   10-ft 3/8 -in Compression Inlet x 3/8 -in Compression Outlet Braided stainless steel Dishwasher connector

The Eastman™ Steel-Flex™ Braided Stainless Steel Dishwasher Connector is designed to provide a secure and reliable connection between your dishwasher and water supply. This 10-foot supply line is constructed with a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 braided stainless steel exterior, offering superior durability, flexibility, and resistance to corrosion, kinking, and crimping. It features 3/8-inch compression fittings and includes additional fittings: a 3/8-inch MIP elbow and a 3/4-inch FHT elbow for versatile installation. Certified lead-free and NSF-compliant (NSF/ANSI/CAN 372), it meets ASME A112.18.6 / CSA B125.6 standards for potable water use. Backed by a 5-year limited warranty, this dishwasher connector provides peace of mind for long-lasting performance. Eastman: Made Right. Made to Last. Since 1946.

BrassCraft   48-in 1/2 in. MIP (with 3/8 in FIP tap) connection to gas supply or gas ball valve -in Pipe thread Inlet x Steel fittings included: (1) 1/2 in. MIP (with 3/8 in. FIP tap) fitting, (1) 1/2 in. FIP fitting, and (1) 3/8 in. MIP fitting -in Pipe thread Outlet Stainless steel Gas appliance installation kit

BrassCraft's gas range and furnace installation kit contains everything you need to connect most natural and LP gas-operated dryers and ranges to your gas supply. BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS excess flow valve (EFV) automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connectors feature a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. The coating is baked directly on the connector surface to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested.

Certified Appliance Accessories   15-ft 1/4 -in Compression Inlet x 1/4 -in Compression Outlet Braided stainless steel Ice maker connector

For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance's manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.

EASTMAN   36-in 1/2 -in MIP Inlet x 1/2 -in MIP Outlet Stainless steel Gas connector

The Eastman™ 3/8-IN OD gas connector is designed to connect most major brands of gas log kits, space heaters, and low-usage appliances to a shut-off valve. The connector is certified for use with most gas logs and space heaters with gas ratings up to 33,400 BTUs. Epoxy Coating provides extra protection from corrosion, chemical stains from common household products, and UV rays and is approved for indoor/outdoor use. Includes (1) 36-IN 3/8-IN OD epoxy-coated gas log connector, (2) 1/2-IN MIP (Tapped 3/8-IN FIP) fittings. Certified to CSA standards and backed by a 5-year warranty, the Eastman™ gas connector delivers reliable performance and peace of mind. Eastman: Made Right. Made to Last. Since 1946.

Certified Appliance Accessories   2 -Pack 4-ft 3/4 -in FGH Inlet x 3/4 -in FGH Outlet Braided stainless steel Washing machine connector

For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by these washing machine hoses from Certified Appliance Accessories. Their flexibility and durability ensure a reliable connection for your next home installation project. These high-quality washing machine hoses have been thoroughly tested and are backed by a 5-year limited warranty. Follow our illustrated, step-by-step directions included in the packaging. Always consult your appliance’s installation instructions. Check your appliance's manual for the correct specifications to ensure these are the right hoses for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.

Selkirk   3-in x 4-1/2-ft Corrugated Solid Pipe

Selkirk type B gas vent pipe and fittings for residential, commercial and industrial applications.

BrassCraft   25 -Pack 24-in 3/4 -in FIP Inlet x 3/4 -in FIP Outlet Copper Water heater connector

BrassCraft Copper-Flex™ 3/4 in. Female Iron Pipe inlet x 3/4 in. Female Iron Pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.

BrassCraft   24-in 1/2 -in MIP Inlet x 1/2 -in MIP Outlet Stainless steel Gas connector

Brass Craft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.