14-Inch-Wide Roof Panel Ridge Caps

SUNTUF   Suntuf 5 -Pack 7-in x 50-in Polycarbonate Roof Panel Ridge Caps

Put a stop to drips and leaks along the seam of roofing panels and a wall with the Suntuf 4 ft. Polycarbonate Side Ridge. This flashing has a smooth edge to enable water to move over the panels.

Metal Sales   Universal ridge 6-in x 126-in Steel Roof Panel Ridge Caps

This is a finishing piece of trim. It goes on top of the building at the peak. They come in 14" or 20" widths and are 10'6" in length.

Metal Sales   Universal Ridge 14-in x 126-in Steel Roof Panel Ridge Caps

Universal ridge flashing is designed to be installed at the ridge of your building. Striations and bends on the flashings provide strength as well as good looks. The ridge flashing combined with sealant provides a watertight seal for your roof.

Metal Sales   Universal ridge 6-in x 126-in Steel Roof Panel Ridge Caps

This is a finishing piece of trim. It goes on top of the building at the peak. They come in 14" or 20" widths and are 10'6" in length.

Union Corrugating   14-in x 126-in Steel Roof Panel Ridge Caps

Ridge Cap is installed at ridge of building to protect and cap off roof peak from weather and water damage. Forms a strong weather tight seal which prevents leaks. Galvalume coating for rust resistance with color to match roof panels. Provides a professional finished look to the building roof peak.

Metal Sales   Universal ridge 6-in x 126-in Steel Roof Panel Ridge Caps

This is a finishing piece of trim. It goes on top of the building at the peak. They come in 14" or 20" widths and are 10'-6" in length.

Metal Sales   Universal ridge 6-in x 126-in Steel Roof Panel Ridge Caps

This is a finishing piece of trim. It goes on top of the building at the peak. They come in 14" or 20" widths and are 10'6" in length.

Tuftex   Universal Ridge and Trim Clear 18-in x 51-in Polycarbonate Roof Panel Ridge Caps

The Tuftex universal ridge/trim is intended specifically to provide a solution for eliminating leaks where two Tuftex corrugated roofing panels meet to form a peak or ridge. The length of the panels will allow for a 3 In. overlap with 4 Ft. of coverage area.

Ondura   ONDURA 12.5-in x 39.5-in Cellulose fiber/asphalt Roof Panel Ridge Caps

Ondura ridge caps are designed to cover 32-1/2 in. of ridge or hip with a 7 in. overlap. The narrow ridge cap is preferred for use on residential structures and smaller buildings. Narrow ridge caps are designed for use alone or with ridge vents.

Ondura   12.5-in x 79-in Cellulose Fiber/Asphalt Roof Panel Ridge Caps

Ondura asphalt ridge caps best used with Ondura corrugated asphalt roofing panels.

Ondura   19.75-in x 79-in Cellulose fiber/asphalt Roof Panel Ridge Caps

Ondura ridge caps are designed to cover 72 in. of ridge or hip with a 7 in. overlap. The narrow ridge cap is preferred for use on residential structures and smaller buildings. Narrow ridge caps are designed for use alone or with ridge vents.

Ondura   19.75-in x 79-in Cellulose fiber/asphalt Roof Panel Ridge Caps

Ondura ridge caps are designed to cover 72 in. of ridge or hip with a 7 in. overlap. The narrow ridge cap is preferred for use on residential structures and smaller buildings. Narrow ridge caps are designed for use alone or with ridge vents.

Ondura   12.5-Inches x 79-Inches Cellulose fiber/asphalt Roof Panel Ridge Caps

Ondura ridge caps are designed to cover 72 in. of ridge or hip with a 7 in. overlap. The narrow ridge cap is preferred for use on residential structures and smaller buildings. Narrow ridge caps are designed for use alone or with ridge vents.

Ondura   12.5-in x 79-in Cellulose fiber/asphalt Roof Panel Ridge Caps

Ondura ridge caps are designed to cover 32-1/2 in. of ridge or hip with a 7 in. overlap. The narrow ridge cap is preferred for use on residential structures and smaller buildings. Narrow ridge caps are designed for use alone or with ridge vents.

Union Corrugating   14-in x 126-in Steel Roof Panel Ridge Caps

Ridge Cap is installed at ridge of building to protect and cap off roof peak from weather and water damage. Forms a strong weather tight seal which prevents leaks. Galvalume coating for rust resistance with color to match roof panels. Provides a professional finished look to the building roof peak.

Union Corrugating   14-in x 126-in Steel Roof Panel Ridge Caps

Ridge Cap is installed at ridge of building to protect and cap off roof peak from weather and water damage. Forms a strong weather tight seal which prevents leaks. Galvalume coating for rust resistance with color to match roof panels. Provides a professional finished look to the building roof peak.