Tatayosi Benchtop Sanders

WEN   4-in x 36-in Belt 4.3 -Amp Benchtop Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

PORTER-CABLE   4-in x 36-in Belt 5 -Amp Benchtop Sander

Grinding down surface corners is easier and more efficient with this Porter-Cable 5 amp bench top sander. An induction ball-bearing 3/4 HP motor provides power for small or large operations on various materials, providing the flexibility you need to tackle different sanding tasks. Separate aluminum work tables for the sanding disc and belt provide a flat surface for accurate operation, and both tilt to 45 degree to help you get closer to your work piece. An easy-to-use belt tension control lever provides fast belt changes, and single-knob belt tracking adjustments help maintain proper alignment for improved precision. The cast-iron base reduces vibration and helps keeps the sander stable during use, preventing shifts while you’re cutting. The sanding belt tilts up to 90 degree vertical, and the unsupported underside allows for sanding of curved work pieces the dust collection system comes with a bag and an adjustable port to help you cut wood at the desired angle without a big mess.

WEN   4-in x 24-in Belt 3.5 -Amp Benchtop Sander

Remember when you were the king of the twist? Now you can make your belt oscillate without ever setting foot on a dance floor with the WEN Oscillating Belt and Spindle Sander. Sand arcs, curves, contours, faces and more of even the most strangely shaped workpieces. This versatile machine acts as both a spindle sander and a belt sander, oscillating up to 58 times per minute with a 5/8-inch stroke. This package includes five different spindle sanding sizes (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch) and one 4 x 24 inch belt. The powerful 3.5 amp motor rotates the various spindles up to 2000 times per minute and the belt up to 1575 feet per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with six pieces of 80 grit sandpaper: one for the belt and five for each respective size spindle diameter. And because its a WEN Product, your purchase comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Belt and Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

WEN   1-in x 30-in Belt 2.3 -Amp Benchtop Sander

Remember when you needed a versatile and reliable sander? The WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc sands, smooths and deburrs jagged edges and splinters on your wood and lumber. With a 2.3-amp motor, users should anticipate speeds of up to 3160 feet per minute on the belt and 3450 RPM on the disc. Changing the spacious 1-inch-by-30-inch belt is a breeze, giving you the power to switch sand paper grits quickly and easily. The compact design makes transportation and storage easier than ever while the heavy-duty base prevents walking and wobbling during operation. With all of this in addition to the 5-inch side disc, you’ll have the capacity to sand whatever your heart desires. A sturdy beveling work table accompanies both the disc and the belt to provide a reliable source of support for your workpieces. This package also includes an 80-grit sanding disc, a 100-grit sanding belt, a miter gauge for angled workpieces and two separate dust ports for vacuum attachments. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a helpful customer phone line. Sand the tightest of corners and the oddest of shapes with the WEN 1 x 30-Inch Belt Sander with 5-Inch Sanding Disc. Remember when you could sand almost anything? Remember WEN.

WEN   3.5 Amp Oscillating Spindle Sander

Remember when you used to have to sand those rounded edges by hand? With the WEN Oscillating Spindle Sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 30 pounds does not mean that we've sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

SKIL   4-in x 36-in Belt 4.5 -Amp Benchtop Sander

The SKIL 4.5-Amp Belt and Disc Combination Sander is a 2-in-1 sanding station for a variety of lengths and angles with a powerful 4.5-amp induction motor to power through the toughest jobs with consistent sanding. Its beveling tabletop allows for sanding from 0 to 45 degrees and the belt angle adjustment allows for 0 to 90-degree sanding. Changing sandpaper grits is easy thanks to a quick tension release lever. A miter gauge guides the workpiece when making crosscuts and a dust port that accepts standard 2-1/2-inch vacuum hoses minimizes dust in the work area.

PORTER-CABLE   4-in x 36-in Belt 5 -Amp Benchtop Sander

Grinding down surface corners is easier and more efficient with this Porter-Cable 5 amp bench top sander. An induction ball-bearing motor provides power for small or large operations on various materials, providing the flexibility you need to tackle different sanding tasks. An aluminum work table can be used on both the sanding disc and belt providing a flat surface for accurate operation, tilts to 45° to help you get closer to your work piece. An easy-to-use belt tension control lever provides fast belt changes, and single-knob belt tracking adjustments help maintain proper alignment for improved precision. The sanding belt tilts up to 90° vertical, and the unsupported underside allows for sanding of curved work pieces the dust collection system.

WEN   2-in x 5.63-in Belt 3.5 -Amp Benchtop Sander

Remember when you had to sand those pieces by hand? Take on arcs, curves, contours, faces and more with the WEN Oscillating Spindle Sander. This versatile machine includes five different sized sanding spindles (1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch), each one oscillating up to 58 times per minute with a 5/8-inch stroke. The powerful 3.5 amp motor rotates the various spindles 2000 times per minute. Onboard storage helps to organize all of the throat plates, rubber sanding drums and table inserts included with this sander while the 1-1/2 inch dust port allows woodworkers to connect a dust collection system to minimize clean up. Adjust the spacious 14.5 by 14.5-inch table anywhere from 0 to 45 degrees to help take on angled edges and surfaces. This sander also comes with five 80 grit sanding sleeves. And because its a WEN Product, your tool comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line. It’s time to shake things up with the WEN Oscillating Spindle Sander. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

Shop Series by Rockwell   4.0-Inches x 36.0-Inches Belt 4.3 -Amp Benchtop Sander

The Rockwell belt/disc sander is a versatile BenchJaw shop sander with a belt table that tilts 0 to 90-degrees and avast aluminum disc table with a tilt range of 0 to 45-degrees. The 1/2 HP motor of the RK7866 sander produces a 3,450 RPM disc speed and a 1,700 SFM belt speed. Features: table tilt range 0 to 90-degrees powerful 1/2 HP motor for fast, efficient material removal aluminum disc sander work table for support, tilts 0 to 45-degrees to accommodate angled work pieces dust port for dust extraction option what's in the box: Rockwell RK7866 Shop Series 4.3 Amp belt/disk sander, 6 In. disc, 4 x 36 In. belt 5 degree miter gauge Allen key 4 x 36 In. sanding belt 6 In. sanding disc.

JET   15-Amp Benchtop Sander

Introducing the new JWDS-2550 drum sander with open stand from Jet. The 1.75 HP motor delivers plenty of power to handle just about any sanding task. The innovative tool-less parallelism system keeps adjustments simple. The worktable is easily positioned by a turn of the parallelism dial. The variable-speed rate permits you to choose the optimal feed rate for a full range of projects, while the Sandsmart™ feature continuously monitors the load on the drum motor to prevent an overload situation. The mirrored design of the dust hood optimizes dust collection preventing chips and dust from getting between your work-piece and the finish. The Jet JWDS-2550 drum dander delivers everything you need for an effortless finish.

WEN   1.5-in x 3-in Belt 5 -Amp Benchtop Sander

Remember when you had to sand those rough edges by hand? With the WEN Variable Speed Handheld Oscillating Spindle Sander, easily smooth out arcs, curves, contours, odd shapes, straight edges, and more. The WEN Variable Speed Handheld Oscillating Spindle Sander features a smooth and powerful 5-amp motor. The sanding spindle oscillates between 50 to 90 times per minute, with an RPM that can be set anywhere from 1800 to 3200 rotations per minute. Our package includes four sanding sleeve sizes (1/2 in., 3/4 in., 1 in., and 1-1/2 in.) and three rubber drums (3/4 in., 1 in., and 1-1/2 in.), providing you a spindle diameter to match whatever the situation requires. Quickly transform this unit into a benchtop spindle sander with the included clamps and mounting pad. Simply place the unit upside down on the surface of your choice, and secure it into place for a reliable stationary sanding machine. The adjustable guide plate provides a straight edge for consistent and reliable material removal. The 1-1/2-inch dust port attaches to the dust collection system of your choice, helping to control sawdust and minimize cleanup. This unit is also compatible with the WEN 5932SPC replacement sanding sleeves. And because it's a WEN Product, your portable spindle sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a nationwide network of experienced service technicians. It's time to make any difficult sanding task a breeze. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.

WEN   8 -Amp Benchtop Sander

Remember when you could sand giant workpieces. Take on the biggest and the baddest with the WEN 12 in. Benchtop Disc Sander. Our powerful 8 Amp motor features a direct-drive design to maximize torque during operation. The spacious 5.5 in. x 15.5 in. table bevels up to 45° for angled pieces. Combine that with the sliding miter gauge for a versatile sander that meets the needs of a variety of projects. This package also includes a pre-installed adhesive-backed 60-grit sanding disc, an onboard 2 in. dust port and a 2.5 in. Dia dust hose. And because its a WEN product, your disc sander comes backed by a 2-year warranty, a nationwide network of skilled service technicians, and a friendly technical support line, all to make sure you remember WEN.

JET   2-in x 42-in Belt 6.2-Amp Benchtop Sander

Another Jet combination bench belt and disc sander designed to deliver the superior finish. The design of this machine permits sanding, grinding and finishing of outside curves or odd-shaped pieces. Heavy-duty base, cast construction and cast iron tilting table means you are getting the very best Jet has to offer.

Baileigh Industrial   2-in x 2-in Belt 6-Amp Benchtop Sander

This space-saving Bench Top Spindle Sander lets you smooth radii with ease and accuracy. The OS-1414 Bench Top Sander has a long-lasting cast iron table, unlike most small wood sanders on the market. Covered by a 1-year parts warranty. Includes lifetime technical support by phone. Call us and speak directly with our experienced customer service team. Questions about this table top sander? Not sure which wood sander is right for you? Call us at 1-920-684-4990 and talk to a Baileigh expert.

Triton Tools   3.5 -Amp Benchtop Sander

Delivers a professional finish to every project. Outstanding performance can be expected from the Triton TSPS450 Oscillating Spindle Sander. The oscillating action in combination with the rotating drum reduces the chance for burning and eliminates band marks on both internal and external profiles. With 6 different sleeve sizes included, the TSPS450 provides woodworkers the flexibility to select the optimum sleeve size for the precise needs of every project. Stability and enhanced material support is provided by the large 11-1/2 inch x 14-1/2 inch cast iron table. This sander is that special woodworking machine that helps every project look even better when finished.