Bosch 18-volt-Battery Jointers & Planers

DEWALT   13-in W 15.0 -Amp Benchtop Planer

The DW735 13-inch Three Knife, Two Speed Thickness Benchtop Planer is powered by a 15 Amp motor to easily managing large cuts in wider materials. Three-knife cutter head with 10,000 rpm and feed speed options for 96 or 179 CPI provide optimal performance for the surface planer.

CRAFTSMAN   12.25-in W 15 -Amp Benchtop Planer

This CRAFTSMAN® 15-Amp bench planer has a powerful motor that allows for superior stock removal as its 8,000 RPM cutter head speed provides 16,000 cuts per minute. The two-knife, quick-change, solid steel cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.

DEWALT   XR 3.25-in W 20-volt max Handheld Planer

The DCP580B features a brushless motor for maximum efficiency that helps to maintain speed under load. The brushless planer features a 3-1/4 in width capacity and ability to adjust depth at 1/256 in adjustments with a rebate capacity of 5/64 in The planer weighs 6.8 lbs and operates on the DEWALT® 20V MAX* battery system. Lightweight and cordless, the planer can be easily transported around the jobsite without the hassle of a cord. Battery, charger and dust bag sold separately.

TOUGHBUILT   Adjustable Roller Stand

The ToughBuilt® S200 Roller Stand is ideal to support, guide and keep long workpieces, like pipes and wood, steady and level. This Roller Stand features box tube frame for strength and stability. The galvanized steel roller glides materials smoothly on top. Legs fold flat for compact storage, and the height adjustment lever easily locks the roller anywhere from 27.5 to 43 inches high. This stand is built to meet the pros’ rigorous demands.

DEWALT   13-in W 15.0 -Amp Benchtop Planer

The DEWALT® 13-in three knife, two speed thickness planer is built to handle large cuts in wide materials with strength and minimum hassle. Its two speed gear box maximizes flexibility, allowing users to optimize cuts per inch at 96 or 179. With a fan-assisted chip ejection system that vacuums chips off the cutter head, you can be confident of a clear workspace. The three knife cutter-head simplifies knife changing, saving time. A 19-3/4-in cast aluminum base is twice as rigid as a standard 10-in base, providing the toughness you need, regardless of the job.

DEWALT   12.5-in W 15.0 -Amp Benchtop Planer

The DEWALT® 12-1/2-in Thickness Planer with Three Knife Cutter-Head is powered by a 15 Amp motor for managing large, deep cuts in hardwood. Three-knife cutter head with speed of 10,000 rpm provides 96 cuts per inch, delivering one of the finest finishes of any mini table saw. Disposable, reversible knives deliver 30% more knife life and make knife change fast and easy. Four-column carriage lock drastically reduces the movement that causes snipe. Extra-long infeed and outfeed tables provide 33-1/2-in of material support. Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass. Turret depth stop allows users to return to their most frequently used depths with ease.

Bosch   3.25-in W 6.5 -Amp Handheld Planer

The Bosch PL1632 3-1/4 In. Planer delivers for pros who need to plane doors or other surfaces quickly and evenly. It delivers performance, convenience and security – with an outstanding planer-guidance system. It has a 6.5 Amp motor that produces 16,500 RPM for fast stock removal and smooth finishes. The tool's ambidextrous lock-off release button helps prevent avoid accidental starts, and it has a lock-on button for extended operation, a combination that is unique to Bosch planers. The aluminum front and rear shoes are precision-machined together for accuracy, and the tool has a machined groove for chamfering. Its counterbalanced blade design puts the blade at an ideal cutting angle and eliminates uneven planing caused by misaligned blades. It comes equipped with a reversible Bosch Woodrazor micrograin carbide blade. The tool also provides a spring-loaded stand that elevates the planer to protect the blade. The dual-mount guide fence can be mounted on either side of tool, with a plastic overshoe that offers protection for the workpiece surface. The dust port accommodates a large shavings bag. This planer is built with a poly micro-V drive belt for enhanced belt durability and a ball-joint cord swivel for enhanced ease of positioning the tool and cord.

CRAFTSMAN   10-Amp 6.3-in Wide Bench Jointer

CRAFTSMAN® 10 amp bench jointer with 6000 to 11000 RPM speed range. Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives. Built-in cutter head lock facilitates knife replacement and adjustment.

CRAFTSMAN   12.5-in W 6 -Amp Handheld Planer

6 Amp Hand Planer provides smooth cutting in hard materials. This planer has a dual-side dust extractor that allows the flexibility to place the dust extraction on either side of the tool to keep the work area clean. The overmold depth knob offers 10 positive steps which allow for better planer control and multiple depth control settings, along with 3 chamfering grooves for options on edge chamfering. An 11.5-in cast aluminum shoe provides added control and better finish quality. Plus, the 5/64-in depth-of-cut removes excess material in less time.

DEWALT   3.25-in W 5.5 -Amp Handheld Planer

The DEWALT® D26676 3-1/4-inch Portable Hand Planer with High Speed Steel Blade has a powerful 5.5 Amp motor that provides a smooth, even finish in the hardest of woods. With 34,000 cuts per minute, the DEWALT® D26676 achieves a fast removal rate. The DEWALT® D26676 also accepts reversible carbide blades (not included) for improved blade life and material finish.

WEN   8.5-Amp Biscuit Joiner

Remember when your boards aligned perfectly? Create joints of all shapes and sizes with a WEN Plate and Biscuit Joiner. Pre-set stops easily create slots for standard #0, #10, and #20 biscuits, or can be manually adjusted for biscuits of more unique sizes. The included fence can be set between 0 to 90 degrees with variable height settings to accommodate projects of all shapes and sizes. The powerful 8.5-amp motor rotates the included 4-inch carbide-tipped blade at 10,000 RPM, making easy work out of even the hardest of woods. This kit also includes a detachable dust bag, 24 #20 wood biscuits, 16 #10 wood biscuits, 10 #0 wood biscuits, and a blow mold carrying case. Perfect for edge miter joints, corner joints, T joints, offset joints, frame joints, edge-to-edge joints, and more. And because its a WEN product, your joiner comes backed by a two-year warranty, a friendly customer help line, and a stocked inventory of replacement parts, all to make sure you remember WEN.

WEN   10-Amp 6-in Wide

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our spiral cutterhead utilizes 12 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 30 by 6 inches. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because it's a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

WEN   10-Amp 8-in Wide

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 8-Inch Spiral Benchtop Jointer. Our spiral cutterhead utilizes 16 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10-amp motor rotates the cutterhead up to 12,000 times per minute. Adjust the infeed table to remove 0 to 1/8-inch of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 33 by 8 inches with support arms that extend up to 51 inches for longer workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes two push blocks for safer jointing and an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because it's a WEN product, the WEN 8-Inch Benchtop Jointer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

WEN   15 -Amp Benchtop Planer

Remember when you brought those old jagged boards back to life? The WEN 13-Inch Bench top Thickness Planer repurposes rough and worn wood for an exceptionally smooth finish. The powerful 15-amp motor provides up to 30,000 cuts per minute at a 26 feet per minute feed rate. Plane boards up to 13 inches wide and 6 inches thick with ease. The handy depth adjustment knob varies each pass to take off anywhere from 0 to 1/8 of an inch. The 2.5-inch and 4-inch dust ports remove chips and sawdust from the workpiece while the depth stop presets help prevent you from planing off too much material. This package also includes height-adjustable infeed and out feed tables to limit snipe while providing extra support to your workpiece during planing. Measuring in at 63 pounds and 24 by 28.25 by 20 inches (with a 23 by 15.1-inch footprint), this unit can be easily moved around the shop using the onboard rubber-grip handles. If that’s not your style, the predrilled base holes let you easily mount the planer to the work surface or stand of your choice, such as the WEN MSA658T Rolling Planer Stand. And because it’s a WEN product, the WEN Thickness Planer comes backed by a friendly customer support line, a stocked inventory of replacement parts, and a two-year warranty. Remember when your planer could handle even the hardest of woods? Remember WEN.

DEWALT   Planer Knives

The DW7352 13" disposable, reversible thickness planer knives are made of M2 laminated tool steel for long-lasting sharpness. Machined locator holes provide easy alignment of knives on cutter-head during knife change.

Kreg   Adjustable Guide Track Kit

Make perfectly straight cuts in sheet goods with guided cutting! Cut full sheets of plywood down to size with precision and ease by using the Kreg® Straight Edge Guide XL. Work with material up to 8 feet and get the cuts you need – whether you’re using a circular saw, jigsaw, or trim router. (Works with most manufacturers.) Guided cutting makes it easier than ever to see exactly where you’ll cut so you can get the results you expect. First, align your cuts quickly and precisely with the cutline indicators. Then, secure the guide to your material using the low-profile GripMaxx™ clamps that are built right into the guide and now you’re ready to make a cut!

DEWALT   6.5-Amp Biscuit Joiner

This heavy duty plate joiner kit is powered by a 6.5 amp, 10,000 RPM motor that provides power for working in the hardest woods. The dual rack and pinion fence ensures blade and fence are always parallel for accurate joints every time.

WEN   15 -Amp Benchtop Planer

The WEN 13 in. Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. Our spiral cutterhead utilizes 26 staggered HSS blades to provide a perfect finish to hard and soft woods alike. The powerful 15 Amp motor rotates the cutterhead over 10,000 RPM at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. thick with ease. The onboard planning gauge helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob makes it easy to take off anywhere from 0 in. to 1/8 in. per pass. The adjustable dust port removes chips and sawdust from the workpiece and blasts them out of the way. The onboard depth stop allows users to achieve an exact workpiece thickness with maximum precision. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand (such as the WEN MSA658 Planer Stand) using the predrilled base holes. Compatible with the WEN BP510H Replacement Spiral Blades. And because it's a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a 2-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

WEN   15 -Amp Benchtop Planer

Remember when you brought those old jagged boards back to life. The WEN 12.5 in. Benchtop Thickness Planer repurposes rough and worn wood for an exceptionally smooth finish. The powerful 15 Amp motor provides up to 20,000 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 12.5 in. W and 6 in. thick with ease. The handy depth adjustment knob varies each pass to take off anywhere from 0 to 1/8 of an inch. The 2 in. dust port removes chips and sawdust from the workpiece while the onboard workpiece return rollers make multiple passes a breeze. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planing. Measuring in at 55.6 lbs. and 22 in. x 23.5 in. x 18.25 in. (with a 20 in. x 12.5 in. foot print), this unit can be easily moved around the shop using the onboard rubber-grip handles. If that's not your style, the predrilled base holes let you easily mount the planer to the work surface or stand of your choice, such as the WEN MSA658T Rolling Planer Stand. and because it's a WEN product, the WEN Thickness Planer comes backed by a friendly customer support line, a stocked inventory of replacement parts and a 2-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

DEWALT   Mobile Base

Designed to support DEWALT® DW733, DW734, and DW735 planers, this stand features sturdy steel construction which stands up under heavy loads. Its convenient foot pedal helps quickly and easily lift unit and stand for changing locations or roll-away storage.