Bosch 18-volt-Battery Dust Collection

WEN   50-gallon Dry Dust Collector with Polyester Filter

Remember when you had a clean work shop? Control the mess and minimize cleanup with the WEN 1,300 CFM 5-Micron Dust Collector. Our powerful motor provides up to 14 amps of dust collection power, creating up to 1,300 cubic feet per minute of high velocity circulation. Attach up to two hoses at a time to either of the 4-inch inlets, allowing for connections to multiple woodworking tools at once. Combine that with the four swivel casters and mobile base for a versatile and powerful dust extractor that can be easily stored and moved around the shop. The included vertical collection bag holds up to 50 gallons of dust at a time, so you can spend your time woodworking instead of constantly emptying out dust. The quick-release clasp makes for simple bag installation, while the 10-inch high-speed steel impeller rotates up to 3450 times per minute for maximum airflow. Compatible with the WEN 28200 10-Foot 4-Inch Dust Hose and the WEN 28221 20-Foot 4-Inch Dust Hose. And, because it’s a WEN product, your dust collector comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

WEN   Dry Dust Collector with Polyester Filter

Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system. The WEN 3-Speed Remote-Controlled Air Filtration System eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 ft. away with the included remote. The lightweight design weighs in at a mere 31 lbs. combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 CFM depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without having to be present. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System is backed by a 2-year warranty, a helpful customer service phone line, and a nationwide network of experienced technicians.

WEN   12-gallon Dry Dust Collector with Polyester Filter

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. The brushed 5.7-amp motor combined with the 6-inch nylon impeller circulates up to 660 cubic feet of air per minute. This design also features easy-access carbon brush caps for straightforward routine maintenance. The 4-inch dust port inlet lets you connect a standard 4-inch dust hose to your favorite woodworking tools. The four 1-3/4-inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount. And because it’s a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

WEN   Hose

This 4 inch by 10 foot hose pairs perfectly with dust extractors and dust collection systems to help fight respiratory illnesses caused by dirty workshops. Heavy-duty construction prevents leaks and tears in the hose while the contoured grooves provide maximum flexibility. The clear material helps users spot blockages during operation. Although this hose is specifically designed for the WEN 3403 1500 CFM Woodworking Dust Collector, its universal build will fit most other brands of extractors as well.

WEN   15-gallon Dry Dust Collector with Polyester Filter

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 15-Gallon Dust Collector. With the power to move up to 600 cubic feet of air per minute, we can say with confidence that this thing really sucks. This design features a 9-inch impeller and a 7.4-amp induction motor for quieter, maintenance-free operation. The 4-inch dust port inlet lets you connect to your favorite woodworking tools. The four 2-inch swivel casters combined with the onboard carrying handle make for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount for accessible dust collection whenever you need it. And because it’s a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

Triton Tools   5-gallon Dry Dust Collector with Polyester Filter

The Triton DCA300 Dust Collection Bucket prevents sawdust filling up or clogging vacuum cleaners.

WEN   Dry Dust Collector with Polyester Filter

Remember when your workshop was full of clean air? Airborne dust particulates can dirty up a woodworking space and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily-replaced filters while circulating the air in your work area. The powerful 4.2-amp motor leaves no stone unturned, collecting every contaminant in its path. The quiet system creates 63 to 68 dB of noise and can be controlled from up to 26 feet away with the included remote. The included eyebolts make for easy mounting and installation in a variety of wood shops. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter (model 3415AF5) and a 1-micron inner filter (model 3415AF1). Easily switch between three speeds of 750, 950, or 1270 CFM depending on what your situation calls for. With the self-automated timer, you don't even have to worry about turning off your machine. Simply set the timer to automatically turn the machine off after a certain time, allowing you to easily give your workshop a thorough cleanse at the end of the day. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System comes backed by a two-year warranty, a helpful customer service phone line, and a stocked inventory of replacement parts. Remember when you could breathe easy in your workshop? Remember WEN.

JET   Dc 18-volt 15-Gallon Dry Dust Collector with Fiberglass Filter

The JET® DC-1100VX features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Oneida Air Systems   Super Dust Deputy 4/5 DIY Dust collector separator kit

Single-stage dust collectors are great for small, hobbyist shops but they come with a cost - fine dust quickly clogs the filter, reducing suction and leaving dust at your tools! Worse still, there's nothing to protect your dust collector from being damaged should you accidentally suck up large wood chunks, bolts, etc. The Super Dust Deputy 4/5 solves these issues by separating out up to 99.9% of dust and bulk debris before it reaches the collector.

Bosch   9-gallon Wet/Dry Self-cleaning Dust Collector with HEPA Filter

The Bosch VAC090AH 9-Gallon Dust Extractor with Auto Filter Clean and HEPA Filter provides a complete package that is designed to help users move toward compliance with the OSHA silica dust regulation. The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 In. static water lift (maximum). The automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a Power Broker dial to match the suction force to application.

WEN   Dry Dust Collector with Polyester Filter

Remember when your workshop was full of clean air. Air-borne dust particulates can dirty up a woodworking space and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in 1 of the 2 easily replaced filters while circulating the air in your work area. The powerful 3 Amp motor leaves no stone unturned, collecting every contaminant in its path. The quiet system creates 63 dB to 68 dB of noise and is controllable up to 26 ft. away with the included R.F. remote. The included eyebolts make for easy mounting and installation in a variety of wood shops. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between 3 speeds of 556, 702 and 1044 CFM depending on what your situation calls for. With the self-automated timer, you dont even have to worry about turning off your machine. Simply set the timer to automatically turn the machine off after a certain number of minutes, allowing you to easily give your workshop a thorough cleanse at the end of the day. And because this is a WEN Product, your 3-Speed Remote-Controlled Air Filtration System comes backed by a 2-year warranty, a helpful customer service support line, and a stocked inventory of replacement parts.

WEN   Hose

Remember when you had a clean workshop? Fight the dust with a WEN 2.5-Inch Dust Hose. This 2.5-inch by 20-foot hose pairs perfectly with dust extractors, dust collection systems, and woodworking tools to help fight respiratory illnesses caused by airborne dust. Heavy-duty PVC construction prevents leaks and tears in the hose, while the contoured grooves provide maximum flexibility. The clear material helps you spot blockages during operation, while the universal design is compatible with the majority of 2.5-inch dust ports available on the market, including the WEN 2.5-inch dust collector adapters and blast gates. Remember when you had maximum suction? Remember WEN.

WEN   Hose

This 4 in. x 20 ft. hose pairs perfectly with dust extractors and Dust collection systems to help fight respiratory illnesses caused by dirty workshops. Heavy-duty construction prevents leaks and tears in the hose while the contoured grooves provide maximum flexibility. The clear material helps users spot blockages during operation. Although this hose is specifically designed for the WEN 3403 1500 CFM Woodworking Dust Collector, its universal build will fit most other brands of extractors as well.

DELTA   Delta 6-gallon Dry Self-cleaning Dust Collector with Polyester Filter

Collect dust and chips from woodworking machines.

Oneida Air Systems   Super Dust Deputy 4/5 Deluxe Dust collector separator kit

Single-stage dust collectors are great for small, hobbyist shops but they come with a cost - fine dust quickly clogs the filter, reducing suction and leaving dust at your tools! Worse still, there's nothing to protect your dust collector from being damaged should you accidentally suck up large wood chunks, bolts, etc. The Super Dust Deputy 4/5 solves these issues by separating out up to 99.9% of dust and bulk debris before it reaches the collector.

WEN   Dry Polyester Dust Collector Filter

Remember when your workshop was full of clean air? Airborne dust particulates can dirty up a space and harm a healthy respiratory system. It's time to keep your lungs happy with the WEN 5-Micron Activated Carbon Outer Air Filters. The activated carbon acts as a sponge, helping to absorb vapors, volatile organic compounds, odors, allergens, and other irritants. Take on smells, smoke, pollen, dust mites, wood dust, and more all with one versatile filter. These filters have been specially designed to fit the WEN 3-Speed 400 CFM Air Filtration System (model 3410). However, their universal build can also fit in the majority of 400 CFM air filtration systems on the market. With simple tool-free installation, you'll be able to quickly replace your existing filters. These are sold in packs of two filters and are best paired with the WEN AF9161C Activated Carbon 1-Micron Inner Air Filters. Remember when you could breathe easy? Remember WEN.

Cen-Tec Systems   Quick Click Hose adapter

Cen-Tec Systems’ expanded multi-brand power adapter set is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool keeping you and your shop clean while protecting you from airborne particulate that can harm your health The adapters are designed to be versatile with most unique and tool industry typical connections The inner collar with durable acetal clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles A bayonet fitting with 1" soft TPE molded fitting is perfect for small power tool connections The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool Changing from the 1" fitting to a 1.5” soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system Further adapters included in this expanded set are 0.75” and 1.25" fitting additional brands of tools and shrouds Finally an air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface.

Cen-Tec Systems   Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection Hose

This hose with multi-brand power adapter set is engineered to connect a wide range of major power tool brands to your home shop vacuum for recovery of the debris and dust generated during the use of the power tool, keeping you and your shop clean while protecting you from airborne particulate that can harm your health. The adapters are designed to be versatile with most tool industry typical connections. The inner collar with durable clip connects directly to most brands of dry wall sanders and other tools generating high volumes of dust or having large debris profiles. A bayonet fitting with 1" soft TPE molded fitting is perfect for small power tool connections. The smooth 360 degree swivel rotation of the bayonet prevents the hose from kinking or resisting free movement of the power tool. Changing from the 1" fitting to a 1-1/2” soft TPE fitting popular on many chop saws and routers takes only a second using the quick clip system. Further adapters included in this expanded set are 3/4” and 1-1/4", fitting additional brands of tools and shrouds. Finally, an air relief is designed into the bayonet fitting to allow adjustment of the air stream at the tool as necessary to prevent tools sealing to the work surface. The final included adapter is an additional 2-1/2" standard wet/dry vacuum adapter into the quick connect adapter. This allows for a 2-1/2" cuff throughout the system so as to work with dust collection workstations often utilized with table saws. The hose offers a 1-1/4" x 20 foot highly flexible commercial grade vacuum hose with smooth interior to prevent clogs and maximize air flow to the vacuum. The proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum.

WEN   Connection

Remember when you had a clean workshop? Keep your hoses secure with a 10 pack of WEN Dust Hose Clamps. These useful connectors lock your hose in place, preventing slipping between connection points and maximizing air flow. The ergonomic thumb screw turns smoothly to reduce or expand the clamps’ diameter as needed, making for easy installation and removal. The durable stainless-steel construction resists rust and corrosion, providing maximum efficiency to your dust collection when properly connected. Each clamp expands anywhere from 87mm all the way out to 113mm for compatibility with the majority of 4-inch dust hoses and ports on the market. Compatible with WEN dust hose models 28200 and 28221. Remember when you had maximum suction? Remember WEN.