SKIL Saw Parts & Attachments

Triton Tools   Triton 2 -Pack Track saw guide track

Pair of 27-1/2-inch (700mm) track lengths with a pair of track connectors. For use with the Triton TTS1400 Plunge Track Saw.

Triton Tools   Track saw guide track

The Triton track has a length of 1500mm/59-inches. Specifically for use with the Triton TTS1400 plunge track saw. For straight, clean, accurate cuts through any type of wood.

Kreg   Adaptive Cutting System 2 -Pack Track saw guide track

The fast, easy way to precisely make straight, wide cuts in plywood and solid wood...anywhere! Parallel Guides attach quickly and easily to the Adaptive Cutting System 62" Guide Track to provide accurate measurement and material stops when making cuts from 12" to 96" wide in solid wood, plywood, and other sheet goods. Parallel Guides make guided cutting even easier and more accurate. Rip Guides also eliminate the hassle and potential inaccuracies of measuring and marking every cut. Parallel Guides lock onto the 62" Guide Track, and precision measuring tapes that extend for cuts from 12" to 96" wide. Heavy-duty brakes lock measurements in to enable making one or many cuts at the exact width without having to measure and mark the work-piece. Simply lock in the measurement desired, place the 62" Guide Track on the material, and position it so the hook on the end of each Parallel-Guide measuring tape contacts the edge of the material Then make the cut. The Guide Track stays in place on the material, while the Parallel Guides position the material precisely. Rip Guides attach quickly to the 62" Guide Track when needed, and can be easily removed without needing to be re-calibrated or adjusted for accurate measurements every time. Sold as a pair. Designed to work with the Adaptive Cutting System 62" Guide Track.

SKATEPLATE   Rip fence

SKATEGUIDE is a companion product to the SKATEPLATE and is a precision rolling cutting guide or fence primarily used for measured rip cuts. SKATEGUIDE saves time by eliminating the need for chalk lines and tape measures and allows for measuring once and for making multiple identical cuts. The four precision rollers reduce friction and binding and the handle allows for two-handed operation for better control and safety. The adjustable SKATEGUIDE allows for up to 13-inch wide cuts. SKATEPLATE fits both the sidewinder and worm drive versions of the SKATEPLATE.

SKATEPLATE   H2O Tile saw water pump

The SKATEPLATE H2O portable Water Saw kit is an accessory to the SKATEPLATE that transforms a circular saw into a portable water saw. SKATEPLATE H2O is exceptional for cutting cement, concrete blocks, masonry, granite, marble and tile. It is a highly portable accessory that saves time and money and significantly reduces caustic crystalline silica dust. An outdoor-rated power interrupter is included in the H2O kit.

Kreg   Adaptive Cutting System 2 -Pack Rip fence

The fast, easy way to precisely make straight, narrow cuts in plywood and solid wood...anywhere! Rip Guides attach quickly and easily to the Adaptive Cutting System 62" Guide Track to provide accurate measurement and material stops when making cuts up to 13" wide in solid wood, plywood, and other sheet goods. Rip Guides make guided cutting even easier and more accurate. Rip Guides also eliminate the hassle and potential inaccuracies of measuring and marking every cut. Rip Guides lock onto the 62" Guide Track and have aluminum bars that extend under the track. That makes it possible to lock in the measurement desired, up to 13", and then make one or many cuts at the exact width without having to measure and mark the work-piece. Simply place the material under the 62" Guide Track, slide it over until the material rests against the Rip-Guide bars, and then make the cut. The Guide Track stays in place on the material, while the Rip Guides position the material precisely. Rip Guides attach quickly to the 62" Guide Track when needed and can be easily removed without needing to be re-calibrated or adjusted for accurate measurements every time. Sold as a pair. Designed to work with the Adaptive Cutting System 62" Guide Track.

SKATEPLATE   Track saw bag

The SKATEPLATE carrying case is made of durable nylon material to secure all of your SKATEPLATE accessories in one location. The bag size can easily accommodate a SKATEPLATE and SKATEGUIDE, as well as a complete SKATEPLATE H2O water saw kit. Special compartments are perfect for storing spare screws and brackets.

SKATEPLATE   Wormdrive Track saw guide track

The SKATEPLATE rollers consist of a set of two original replacement rollers for the worm drive version of the SKATEPLATE. These durable polyurethane rollers with sealed bearings are easily interchangeable within seconds to avoid delays or disruptions at the workplace.

Triton Tools   Triton Track saw bag

Featuring heavy duty canvas, the Triton TTSSB Plunge Track Saw Bag is for use with the Triton TTS1400 Plunge Track Saw.

SKATEPLATE   Track saw guide track

These original replacement parts include an assortment of screws, brackets and bushings for both the sidewinder and worm drive versions of the SKATEPLATE.

Bosch   Guide rail

This versatile guide parallel cutting from 5/8 in. to 6 in. (16 mm to 170 mm) in from workpiece edge. It also allows cutting of circles 5 in. to 16-1/2 in. (127 mm to 420 mm) in diameter. For use with all Bosch Jig Saws except for JS260.

Bosch   Track Saw Splinter Strip

The Track Anti-Splinter Strip helps prevent tearing and splintering along the cut edge, therefore ensuring better cut quality. The strip is custom molded to securely interlock with a slot in the track, rather than being glued with a detachable adhesive strip. This strip is part of the Bosch Track Saw and track-guidance system, which allows precise end-to-end cuts and plunge cuts. It is accurate and easy to work with. The track saw, along with the tracks, can make a more-easily transportable alternative to a table saw to a jobsite. The cuts are table-saw quality, with virtually no splinters, thanks in part to the tracks and their FSNSS Anti-Splinter Strip.

Bosch   Track Saw Friction Strip

This 11 Ft. Rubber Traction Strip for Tracks helps the Bosch track-saw track grip the workpiece for non-slip positioning. The strip is custom molded to securely interlock with a slot in the track, rather than being glued with a detachable adhesive strip. This is part of the Bosch Track Saw System, which allows precise end-to-end cuts and plunge cuts. It is accurate and easy to work with. The track saw, along with the tracks, can make a more-easily transportable alternative to a table saw to a jobsite. The cuts are table-saw quality, with virtually no splinters.

Bosch   Rip Fence

The Bosch GKTPA is a rip fence for the Track Saw, helping to make repetitive, accurate rip cuts. It also eliminates the user’s need to measure and mark the workpiece before each cut. The attachment’s steel and aluminum construction is designed for long life and light weight. The Bosch Track Saw, along with the tracks, can make a more-easily transportable alternative to a table saw to a jobsite. The cuts are table-saw quality, with virtually no splinters. (The GKTPA Rip Fence/Parallel Guide is not used at the same time as the track system is used.)

PROTOCOL   Miter Saw Handle/Gfci Outlet Kit

The PROTOCOL Equipment MA-31 Miter Saw Stand Handle and GFCI Electrical Outlet Kit is a great accessory kit to add onto your existing miter saw stand and is compatible with the WS-124 and WS-077 work stations (sold separately). The enhanced handle makes it easier to grab and move the stand around while providing additional storage for power tools, pencils, measuring tape, and more. The triple tap GFCI helps protect and power multiple tools up to 15-amps, all while being incredibly easy to install.

Kreg   Kreg Precision Band Saw Fence Band Saw Fence Band saw fence

Precision band saw fence for ultimate accuracy.