Fiber Cement Circular Saw Blades

DEWALT   ELITE SERIES 7-1/4-in 24 -Tooth Rough Finish Tungsten carbide-tipped steel Circular saw blade Set 3 -Pack

DEWALT 7-1/4-in 24T 3pk Elite Series Saw Blade

Bosch   7-1/4-in 40 -Tooth Fine Finish Tungsten carbide-tipped steel Circular saw blade Individual

Bosch Edge Circular Saw Blades start sharp, stay sharp and resist impact damage for long life. They are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance. They have face-ground teeth for clean cuts and excellent finish. The special tooth geometry and teeth count provides high-quality finishing cuts in wood. To avoid warping, these blades have been built with expansion slots. These blades also feature control cut shoulders to reduce kickback, and they have body slots for excessive heat.

Crescent   Medium Aluminum 12-in 96 -Tooth Carbide Circular saw blade Individual

Crescent's Aluminum Blades deliver quality cutting performance for tough demands on the jobsite. Premium High Velocity™ carbide teeth slice through aluminum with ease delivering 2X life for maximum productivity. A thin kerf design provides less burring, while Active Shield™ non-stick blade coating protects against heat, gumming and corrosion delivering 2x faster cutting speed for greater productivity. Laser cut vibration and expansion slots create a more balanced blade for greater durability and finish

WEN   WEN Saw Blades 12-in 80 -Tooth Fine Finish Tungsten carbide-tipped steel Miter saw blade Individual

Remember when you had a smooth cut with no tearout? The WEN 12-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 1-inch arbor allows for compatibility with the majority of 12-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.6 mm). It's time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

WEN   8-in Set -Tooth Fine Finish Carbide-tipped LCS Dado Table saw blade Set

Remember when you could cut the perfect dado? It’s time to get in the groove with the WEN 8-Inch 24-Tooth Stacked Dado Blade Set. This versatile set includes two 24-tooth carbide tipped outer blades, six 4-tooth chipper blades, and 12 stainless-steel spacers for precise width adjustments. The wide variety of included pieces lets you create up to 20 different widths of dados anywhere from 1/4 to 29/32 inches (6.35 to 23mm). The included carrying case makes for easy storage and transportation between uses, while the 5/8-inch arbor is compatible with the majority of 10-inch table saws on the market, including the WEN TT1015 15-Amp 2 HP 10-Inch Industrial Table Saw. NOTE: use with the WEN TT1015 Table Saw also requires a WEN Zero Clearance Dado Throatplate (part number TT1015-DADO). Remember when you had the perfect dado blade set? Remember WEN.

Evolution   14-in 80 -Tooth Tungsten carbide-tipped steel Chop saw blade Individual

Evolution's 14 in 80-tooth aluminum cutting blade uses the highest-grade tungsten carbide for increased durability. Hardened blade body to ensure the blade runs truer for longer and provides ultra-high grade brazing techniques. These make it the ideal choice for cutting aluminum and other non-ferrous metals. Leaving an instantly workable finish and producing virtually no heat, burrs, or sparks. Common applications include grating, extrusions, pipe, and tubing.

Crescent   Medium Aluminum 10-in 84 -Tooth Carbide Circular saw blade Individual

Crescent's Aluminum Blades deliver quality cutting performance for tough demands on the jobsite. Premium High Velocity™ carbide teeth slice through aluminum with ease delivering 2X life for maximum productivity. A thin kerf design provides less burring, while Active Shield™ non-stick blade coating protects against heat, gumming and corrosion delivering 2x faster cutting speed for greater productivity. Laser cut vibration and expansion slots create a more balanced blade for greater durability and finish

WORX   4-1/2-in 24 -Tooth High-speed steel Circular saw blade Individual

The WORX compact circular saw 4-1/2 in tungsten carbide tipped blade has 24 teeth and is suitable for long-lasting cuts in wood, plastic, and composites. For use with WX429L.

WEN   10-in 80 -Tooth Fine Finish Carbide-tipped LCS Miter saw blade Individual

Remember when you had a blade that lasted. Treat your saw right with an industrial-grade Apex blade from WEN. The WEN Apex series provides high-end saw blades made from premium high carbon steel for reliable performance and a longer lifespan. Each blade is equipped with Cool-Cut Coating, this abrasion-resistant, non-stick PTFE layer helps minimize friction, prevent workpiece burns and limit tearout. Alternate top bevel (ATB) machine-cut C4-grade carbide-tipped teeth provide alternating teeth angles that cut workpieces cleanly. Laser-cut silencing and stabilizing vents allow the blade to expand and contract under varying temperature levels, helping create consistent balance that reduces noise, vibration and heat. The 10 in. Dia combined with the 5/8 in. arbor allows for compatibility with the majority of 10 in. miter saws, jobsite saws and table saws on the market. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 in. W (2.5 mm). It's time to get the cut you deserve with a WEN Apex Saw Blade. Remember when you had a blade you could rely on. Remember WEN.

Spyder   Framing and Demolition 6-1/2-in 24 -Tooth Rough Finish Tungsten carbide-tipped steel Circular saw blade Set 2 -Pack

Rip and crosscut with ease with Spyder Tarantula™ Framing and Demolition circular saw blades. NiCo teeth provide clean cuts and exceptionally long life. Demo blade is for use in new wood materials and in demolition applications where nails, screws, staples, flashing, etc may be hidden in the material to be cut. Framing blade is for use in new materials. Track straight with reduced friction, heat and noise — Tarantula™ circular saw blades are the professionals' choice for framing and construction.

Dremel   3-3/8-in Set -Tooth High-performance aluminum oxide Assorted saw blade set Set 7 -Pack

Contains seven genuine Dremel Saw-Max cutting wheels. Includes: (1) SM500 wood and plastic carbide wheel, (1) SM540 tile diamond wheel, (2) SM520 masonry cut-off wheels and (3) SM510 metal cut-off wheels. Application and material usage information included.

SKIL   4-3/8-in 36-Tooth Rough Finish Carbide Circular Saw Blade

SKILSAW 4-3/8-inch X 36-tooth C3 carbide-tipped blade is for cross/miter/rip cuts, ideal for laminate flooring. Genuine replacement blade for the 3600 SKIL flooring saw.

Evolution   10-in 0 -Tooth Diamond Miter saw blade Individual

Evolution advanced performance diamond blades are designed to the highest specification with a hardened blade body to ensure maximum performance and blade life. When combined with the right saw, these blades give your tools professional masonry cutting c, with the power to cut cleanly and accurately through various types of stone. Each blade is enhanced with a high concentration of diamond to increase the number of cuts and guarantee a quality result.

SKIL   4-3/8-in 40-Tooth Rough Finish Carbide Circular Saw Blade

This is a genuine replacement blade for the SKIL 3600 flooring saw. Use it to cross, miter and rip cut wood, laminate and engineered flooring. Model 75540.

Spyder   8-1/4-in 60 -Tooth Fine Finish Tungsten carbide-tipped steel Miter/Table saw blade Individual

Rip and crosscut with ease with Spyder Tarantula Fine and Ultra Fine circular saw blades. NiCo teeth are sharpened 3x to provide clean cuts and exceptionally long life. Tracking straight with reduced friction, heat and noise, Tarantula circular saw blades are the professionals choice for framing and construction. Fine and ultra fine blades are for use in new wood materials and provide the cleanest cuts on soft and hard woods, trim, MDF and plywood. Up to 6x the life of standard carbide blades.

Kobalt   4-in High-speed steel Circular saw blade Set 3 -Pack

Kobalt's tool accessory blade is designed for surface prep and grinding of metal surfaces. For use with the Kobalt 24-Volt Multi-Purpose 4-In Saw, Lowe's item #961863.

DEWALT   12-in 96 -Tooth Fine Finish Carbide Circular saw blade Individual

The DEWALT Precision Trim 12-inch 96-tooth miter circular saw blade is suitable for a wide range of materials, including laminate, hardwood, softwood, plywood, glass, plastic, and non-ferrous metals. As such, it is a handy tool for construction-related projects involving cabinetry (maple, oak, walnut, etc.), furniture making, joinery, sheet roofing, gutters, pipes, cables, cladding panels, wall linings, shutters, and more. The blade features premium micro-grain carbide that creates ultra-sharp cutting edges that slice through tough materials with ease. This also reduces splintering and breakage. The tough coat finish, apart from preventing rust, reduces friction and gum-up. Shop this miter saw blade from DEWALT to cut non-ferrous metals and other materials today.