Tile Hole Saws & Accessories

CRAFTSMAN   Bi-metal Arbored Adjustable Door lock kit Set 6 -Piece with Soft Case

6 Piece Door Lock Installation Kit eliminate the guessing game and make the process of installing a lockset on a new door quick and easy.

Spyder   Carbide-tipped Arbored Adjustable Hole saw kit Set 14 -Piece with Hard Case

Spyder's Tungsten Carbide-Tipped (TCT) hole saws cut more materials up to 5x faster and make up to 10x more cuts — lasting longer than conventional bi-metal hole saws. TCT hole saws drill through wood, MDF, fiber cement board, porous concrete block, ceramic wall tile, plastic/PVS and more. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit. All TCT, Tarantula, and Bi-Metal hole saws fit on Spyder Rapid Core Eject arbors and pilot bits (sold separately), and on universal hole saw arbors. Spyder's TCT hole saw is the pro's choice for innovation, high performance, speed, and versatility — drill more holes in more materials in less time. Not for use in hammer mode, or for drilling metal, wood with nails, harder, abrasive materials, or block/brick/tile applications with a Mohs hardness of 6 or greater. Always use a drill with a support handle. 14-piece kit contains (11) hole saws: 1-3/8, 1-1/2, 1-3/4, 2, 2-1/2, 2-3/4, 3, 3-1/2, 4, 4-1/4, 4-1/2; (2) pilot bits: Hex10 TCT, Hex10 HSS; (1) arbor: Hex10 in a hard storage case.

Spyder   Bi-metal Arbored Adjustable Hole saw kit Set 11 -Piece with Hard Case

Cut holes in a snap — even at an angle. Drop out the core at the touch of a button. Push the button again to change blade diameters. Faster. Easier. Smarter. Spyder's Bi-Metal hole saws feature variable tooth pitch geometry and tough bi-metal steel, making them the durable choice for drilling holes in wood with nails, metals, and plastics. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit. Spyder's TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbors and pilot bits, and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode. 11-piece kit includes (7) hole saws: 3/4, 7/8, 1-1/8, 1-1/2, 2, 2-1/8, 2-1/2; (2) Pilot Bits: Hex8 HSS, Hex10 HSS; (2) Arbors: Hex8, Hex10 in a hard case.

LENOX   Bi-metal Arbored Hole saw 13 -Piece with Hard Case

This LENOX 13-piece bi-metal hole saw kit features T2 technology for longer blade life and faster cutting in wood and metal applications. The non-binding coating provides a faster cut, and the Speed Slot™ plug removal feature is easy to use. The split point pilot drill bit delivers faster penetration and less walking on contact, giving you more precise cuts. Store the blades, arbors and pilot bits in the included metal case.

Kobalt   6-3/8-in Carbide-grit Arbored Recessed lighting hole saw

This kit includes everything needed to install a 6-in recessed light.

LENOX   Bi-metal Non-arbored Door lock kit Set 4 -Piece

For installation of door locks in wood and metal doors.

Klein Tools   Adjustable Hole Saw with Auto-Set Arms

The Klein Tools Adjustable Hole Saw offers quick and precise hole cutting from 2 to 7-Inch (5.1 to 17.8 cm) in drywall and ceiling tile. It features an integrated gearing mechanism for easy size adjustments and eliminates the need for extra tools. The spring-loaded collar ensures controlled cuts, while the durable polypropylene dust bowl with integrated vacuum port allows for effective debris containment and effortless cleanup.

LENOX   4-in Bi-metal Non-arbored Hole saw

LENOX Bi-Metal Hole Saws With T3 TechnologyTM deliver 50% longer life and 2X more durability vs the prior LENOX generation. An Increased wall thickness improves durability and minimizes tooth loss when cutting metal. Optimized tooth design penetrates metal with ease. SPEED SLOT(R) staircase design delivers fast, easy plug ejection

LENOX   3/8-in Steel Hole Saw Arbor

The LENOX SNAP-BACK Quick Change Hole Saw Arbors Feature Tool-Free Saw and Pilot Bit Change For Productivity. The 2-Step Design Releases The Saw And Pilot Bit Without Requiring Additional Tools (Only applies to LENOX Pilot Drills). The Collar Snaps Into Each Position To Allow For Single-Handed Operation And Is Reinforced To Stay Engaged While Drilling. LENOX SNAP-BACK(R) Quick Change Arbors Are Universally Compatible With All Threaded Hole Saws And Do Not Require Adapters For Use (For the Range of Diameters Listed On Packaging).

Spyder   1/2-in Rapid Core Eject Quick Change HSS Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex10 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system. Always use a drill motor that is equipped with a support handle.

Marshalltown   1-3/8-in Diamond Non-arbored Hole saw with Hard Case

The MARSHALLTOWN Wet Diamond Hole Saw is used to allow water lines and faucets to pass through installed tile. The diamond-tipped drill bit cuts a 1-3/8-In diameter hole in tile, and the watering cup and mounting gasket keep the bit cool while holding the bit in place when drilling. The Wet Diamond Hole Saw comes with six mounting gaskets and can be used on ceramic, marble, porcelain, and granite.

Spyder   1/2-in Rapid Core Eject Quick Change Steel/Tungsten carbide Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex10 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system. Always use a drill motor that is equipped with a support handle.

LENOX   6-in Bi-metal Non-arbored Hole saw

LENOX Bi-Metal Hole Saws With T3 TechnologyTM deliver 50% longer life and 2X more durability vs the prior LENOX generation. An Increased wall thickness improves durability and minimizes tooth loss when cutting metal. Optimized tooth design penetrates metal with ease. SPEED SLOT(R) staircase design delivers fast, easy plug ejection

Spyder   6-1/4-in Carbide-tipped Non-arbored Hole saw

Spyder's Tungsten Carbide-Tipped (TCT) hole saws cut more materials up to 5x faster and make up to 10x more cuts — lasting longer than conventional bi-metal hole saws. TCT hole saws drill through wood, MDF, fiber cement board, porous concrete block, ceramic wall tile, plastic/PVS and more. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit . All TCT, Tarantula, and Bi-Metal hole saws fit on Spyder Rapid Core Eject arbors and pilot bits (sold separately), and on universal hole saw arbors. Spyder's TCT hole saw is the pro's choice for innovation, high performance, speed, and versatility — drill more holes in more materials in less time. Not for use in hammer mode, or for drilling metal, wood with nails, harder, abrasive materials, or block/brick/tile applications with a Mohs hardness of 6 or greater. Always use a drill with a support handle.

Spyder   Tarantula Carbide-tipped Arbored Adjustable Hole saw kit Set 9 -Piece with Hard Case

Spyder's carbide-tipped Tarantula hole saws cut the toughest materials including steel, stainless steel, nail-embedded wood, fiber cement board, plastics, and more. Durable tungsten carbide cutting teeth make up to 50x more cuts than conventional bi-metal hole saws, and they are up to 10x faster — cutting through the toughest materials and extending bit life. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit (adapters and pilot bit sold separately). Spyder TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbor and pilot bits and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode or on harder, more abrasive materials. 9-piece kit contains (5) hole saws: 1, 1-1/8, 1-3/8, 1-1/2, 2; (2) HSS pilot bits: Hex8, Hex10; and (2) arbors: Hex10 and Hex8, in a hard case.

Spyder   Diamond Edge 1/4-in Diamond Arbored Hole saw

Spyder diamond hole saws are the professional choice for hole-making in tile, glass and masonry materials. Premium boron coated industrial diamond abrasive self-sharpens for quick cuts and long - up to 20x more holes than standard diamond hole saws and up to 10x faster than standard glass and tile bits. A high temperature nickel braze adheres at temperatures up to 1.5x the temperature of braze used on standard diamond hole saws - increasing diamond abrasive retention and saw life. Oversized core removal slot enables easy side evacuation of the core, without tools or prying (for materials up to 5/8-in in depth). A 1/4-in speed hex won’t slip in the chuck. Heavy duty single piece construction and vacuum furnace heat treated high-alloy steel provides a reliable cut and consistent, round holes. These saws can be used wet or dry – water spray or immersion will increase tool life, reduce dust and debris, and will create a more quiet cut. Spyder's diamond hole saws are for use on ceramic, porcelain, granite, slate, marble, glass, cement fiber board, laminates and more; with a 1-1/8-in total depth of cut. Made in the USA.