Spyder Hole Saws & Kits

Spyder   Tarantula 2-3/4-in Carbide-tipped Non-arbored Hole saw

Spyder's carbide-tipped Tarantula hole saws cut the toughest materials including steel, stainless steel, nail-embedded wood, fiber cement board, plastics, and more. Durable tungsten carbide cutting teeth make up to 50x more cuts than conventional bi-metal hole saws, and they are up to 10x faster — cutting through the toughest materials and extending bit life. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit (adapters and pilot bit sold separately). Spyder TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbor and pilot bits and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode or on harder, more abrasive materials.

LENOX   7/8-in Bi-metal Non-arbored Hole saw

New LENOX® Bi-Metal Hole Saws deliver up to 50% longer life* with a proprietary toothform that cuts common construction materials efficiently. A reinforced tooth design absorbs impact forces from obstructions and bind-ups while drilling for less tooth breakage. The SPEED SLOT staircase design allows for fast and easy plug ejection. Compatible with both quick change and traditional non-quick change arbors*. *vs previous generation LENOX® Bi-Metal Hole Saw drilling low carbon steel. *Excluding proprietary arbor systems that require adapters. For the range of diameters listed on packaging only.

DEWALT   ELITE SERIES 3-1/2-in Carbide-tipped Non-arbored Hole saw

The DEWALT ELITE SERIES TM Metal Cutting Carbide Tipped Hole Saws last up to 3X longer vs Milwaukee® and feature advanced welding technology to increase bond strength and retain carbide tips. The carbide tipped cutting edge cuts through a variety of demanding materials such as wood with nails, thick metal, and stainless steel. An aggressive tooth design penetrates hard metals and removes chips efficiently to reduce heat buildup. The large, continuous slot provides multiple leverage points for easy plug removal.

DEWALT   ELITE SERIES 2-1/2-in Carbide-tipped Non-arbored Hole saw

The DEWALT ELITE SERIES TM Metal Cutting Carbide Tipped Hole Saws last up to 3X longer vs Milwaukee® and feature advanced welding technology to increase bond strength and retain carbide tips. The carbide tipped cutting edge cuts through a variety of demanding materials such as wood with nails, thick metal, and stainless steel. An aggressive tooth design penetrates hard metals and removes chips efficiently to reduce heat buildup. The large, continuous slot provides multiple leverage points for easy plug removal.

Spyder   5-3/4-in Bi-metal Non-arbored Hole saw

Cut holes in a snap — even at an angle. Drop out the core at the touch of a button. Push the button again to change blade diameters. Faster. Easier. Smarter. Spyder's Bi-Metal hole saws feature variable tooth pitch geometry and tough bi-metal steel, making them the durable choice for drilling holes in wood with nails, metals, and plastics. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit. Spyder's TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbors and pilot bits (sold separately), and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode.

Spyder   Tarantula 2-1/8-in Carbide-tipped Non-arbored Hole saw

Spyder's carbide-tipped Tarantula hole saws cut the toughest materials including steel, stainless steel, nail-embedded wood, fiber cement board, plastics, and more. Durable tungsten carbide cutting teeth make up to 50x more cuts than conventional bi-metal hole saws, and they are up to 10x faster — cutting through the toughest materials and extending bit life. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit (adapters and pilot bit sold separately). Spyder TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbor and pilot bits and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode or on harder, more abrasive materials.

Spyder   4-in Carbide-tipped Non-arbored Hole saw

Spyder's Tungsten Carbide Tipped (TCT) hole saws cut more materials (up to 5x faster), last longer (up to 10x more holes), and cut deeper (maximum cut depth of 6-1/4-in) than conventional bi-metal saws. TCT hole saws cut wood, concrete block, brick, fiber cement board, ceramic wall tile, PVC, and more (with a Mohs hardness of less than 6). This extended cutting depth makes Spyder's Deep Cut hole saws excellent for stacked materials, deeper cuts, and for drilling through brick and concrete block. Note: Spyder TCT Deep Cut hole saws use Hex11 arbors/pilots which do not feature Rapid Core Eject technology; they cannot cut at an angle or enlarge existing holes. For use in standard rotary drills. Do not use in hammer drill mode. Not recommended for harder, abrasive materials.

Spyder   2-in Bi-metal Non-arbored Hole saw

Cut holes in a snap — even at an angle. Drop out the core at the touch of a button. Push the button again to change blade diameters. Faster. Easier. Smarter. Spyder's Bi-Metal hole saws feature variable tooth pitch geometry and tough bi-metal steel, making them the durable choice for drilling holes in wood with nails, metals, and plastics. Use with Spyder's Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit. Spyder's TCT, Bi-Metal, and Tarantula hole saws fit on Spyder's Rapid Core Eject arbors and pilot bits (sold separately), and on universal hole saw arbors. Using a drill motor with a support handle is recommended. Not for use in hammer mode.

Drill America   6-in Bi-metal Non-arbored Hole saw with Hard Case

Drill America Bi-Metal Hole Saws are versatile cutters that can be used in a wide variety of applications. It needs just 1 pass to cut through studs. These hole saws cuts faster, smoother without as much vibration as the others due to its variable pitch teeth. Drill America Bi-Metal Hole Saws supports heavy-duty cutting with its rugged constitution, which is constructed on tough metal.

Bosch   2-3/4-in Diamond Arbored Hole saw

Fast and easy starts, even in the hardest materials like porcelain and granite. Quick Changeuniversal hole saw system allows change to any size or type of hole saw in seconds. For use only with machines designed for wet sawing and on a GFCI-protected circuit.

Kobalt   Bi-metal Arbored Hole Saw Set (7-Piece)

The Kobalt 7-piece bi-metal hole saw set is built for heavy duty cutting of most materials.

LENOX   Carbide-tipped Non-arbored Hole Saw Kit Set (8-Piece) with Hard Case

Lenox Speed Slot Carbide Hole Saws deliver up to 50X life in hard metal drilling applications. High performance carbides are welded to the cutting edge for durability and to help prevent tooth loss. Aggressive tooth design drills through wood, steel, stainless, cast iron, fiber cement and plaster. Patented SPEED SLOT staircase design has multiple leverage points for easy plug ejection. Tall body easily drills through 2X dimensional lumber for rough-in work