Spyder Hole Saw Arbors

LENOX   3/8-in Steel Hole Saw Arbor

The LENOX SNAP-BACK Quick Change Hole Saw Arbors Feature Tool-Free Saw and Pilot Bit Change For Productivity. The 2-Step Design Releases The Saw And Pilot Bit Without Requiring Additional Tools (Only applies to LENOX Pilot Drills). The Collar Snaps Into Each Position To Allow For Single-Handed Operation And Is Reinforced To Stay Engaged While Drilling. LENOX SNAP-BACK(R) Quick Change Arbors Are Universally Compatible With All Threaded Hole Saws And Do Not Require Adapters For Use (For the Range of Diameters Listed On Packaging).

Spyder   1/2-in Rapid Core Eject Quick Change HSS Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex10 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system. Always use a drill motor that is equipped with a support handle.

Spyder   1/2-in Rapid Core Eject Quick Change Steel/Tungsten carbide Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex10 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system. Always use a drill motor that is equipped with a support handle.

Spyder   3/8-in Diamond Carbide Hole Saw Arbor

Spyder carbide-tipped diamond hole saw arbors are the professional choice for hole-making in tile, glass and masonry materials. The drill bit is spring-tensioned to apply the precise drilling pressure - optimizing tool life. A 5/8-18 thread is for use with standard diamond hole saws. For use on ceramic, porcelain, granite, slate, marble, glass, cement fiber board, laminates and more; 3/16-in carbide drill bit, 3/8-in shank, 1-1/2-in total depth of cut. Made in the USA.

DEWALT   1/2-in ELITE SERIES Quick Change Steel Hole Saw Arbor

The DEWALT RAPID LOAD(R) Quick Change Hole Saw Accessory System Allows For Changing Hole Saws And Pilot Bits Without Additional Tools. The Collar Clicks Between Two Positions For Saw And Pilot Bit Change And Stays In Position For One-Handed Application. The No-Seize Collar Stays Engaged While Drilling To Resist The Hole Saw Locking Onto Arbor. DEWALT RAPID LOAD(R) Arbors Fit With All Threaded Hole Saws, No Adapter Required )For Diameter Ranges Listed On Package).

LENOX   1/2-in Quick Change Steel Hole Saw Arbor

The LENOX SNAP-BACK Quick Change Hole Saw Arbors Feature Tool-Free Saw and Pilot Bit Change For Productivity. The 2-Step Design Releases The Saw And Pilot Bit Without Requiring Additional Tools. The Collar Snaps Into Each Position, to Allow For Single-Handed Operation, and Is Reinforced To Stay Engaged While Drilling. LENOX SNAP-BACK Quick Change Arbors Are Universally Compatible With All Threaded Hole Saws And Do Not Require Adapters For Use. (Only applies to LENOX Pilot Drills) - For the Range of Diameters Listed On Packaging..

LENOX   1/2-in Steel Hole Saw Arbor

The LENOX SNAP-BACK(R) Quick Change Hole Saw Arbors Feature Tool-Free Saw and Pilot Bit Change For Productivity. The 2-Step Design Releases The Saw And Pilot Bit Without Requiring Additional Tools (Only applies to LENOX Pilot Drills). The Collar Snaps Into Each Position To Allow For Single-Handed Operation And Is Reinforced To Stay Engaged While Drilling. LENOX SNAP-BACK(R) Quick Change Arbors Are Universally Compatible With All Threaded Hole Saws And Do Not Require Adapters For Use (For the Range of Diameters Listed On Packaging).

LENOX   3/8-in Quick Change Steel Hole Saw Arbor

The LENOX SNAP-BACK Quick Change Hole Saw Arbors Feature Tool-Free Saw and Pilot Bit Change For Productivity. The 2-Step Design Releases The Saw And Pilot Bit Without Requiring Additional Tools. The Collar Snaps Into Each Position, to Allow For Single-Handed Operation, and Is Reinforced To Stay Engaged While Drilling. LENOX SNAP-BACK Quick Change Arbors Are Universally Compatible With All Threaded Hole Saws And Do Not Require Adapters For Use. (Only applies to LENOX Pilot Drills) - For the Range of Diameters Listed On Packaging..

Spyder   3/8-in Rapid Core Eject Quick Change HSS Hole Saw Arbor

Spyder's Rapid Core Eject arbor system to remove cores without prying - drill hole, press button, pull back the hole saw, and eject the core - up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject arbor/pilot bits, or use your favorite hole saw (with a 1/2-20 thread) with the Spyder Rapid Core Eject arbor system.

LENOX   1/4-in Quick Change HSS Hole Saw Arbor

The LENOX Hole Saw Pilot Drills Feature A Quick Change Groove Compatible With Both LENOX SNAP-BACK Quick Change Arbors And Traditional Non-Quick Change Arbors (Excluding Proprietary Arbor Systems Not Using Standard 1/4-In Shank Pilot Drills ). The High Speed Steel Construction Is Optimized For Drilling Wood And Metal.

LENOX   1/4-in Quick Change HSS Hole Saw Arbor

The LENOX Hole Saw Pilot Drills Feature A Quick Change Groove Compatible With Both LENOX SNAP-BACK Quick Change Arbors And Traditional Non-Quick Change Arbors (Excluding Proprietary Arbor Systems Not Using Standard 1/4-In Shank Pilot Drills ). The High Speed Steel Construction Is Optimized For Drilling Wood And Metal.

Spyder   3/8-in Rapid Core Eject Quick Change Steel/Tungsten carbide Hole Saw Arbor

Spyder's Rapid Core Eject arbor system to remove cores without prying - drill hole, press button, pull back the hole saw, and eject the core - up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject arbor/pilot bits, or use your favorite hole saw (with a 1/2-20 thread) with the Spyder Rapid Core Eject arbor system.

LENOX   3/8-in Quick Change Metal Hole Saw Arbor

LENOX has a complete range of arbors and accessories, including extensions and pilot bits for all hole saw types. Several arbors have special features such as quick attachment, plug ejection or hole enlarging.

Spyder   1/2-in Deep Cut Tungsten carbide Hole Saw Arbor

Spyder's Tungsten Carbide Tipped (TCT) hole saws cut more materials (up to 5x faster), last longer (up to 10x more holes), and cut deeper (maximum cut depth of 6-1/4-in) than conventional bi-metal saws. TCT hole saws cut wood, concrete block, brick, fiber cement board, ceramic wall tile, PVC, and more (with a Mohs hardness of less than 6). This extended cutting depth makes Spyder's Deep Cut hole saws excellent for stacked materials, deeper cuts, and for drilling through brick and concrete block. Note: Spyder TCT Deep Cut hole saws use Hex11 arbors/pilots which do not feature Rapid Core Eject technology; they cannot cut at an angle or enlarge existing holes. For use in standard rotary drills. Do not use in hammer drill mode. Not recommended for harder, abrasive materials.

Spyder   1/2-in Deep Cut HSS Hole Saw Arbor

Spyder's Tungsten Carbide Tipped (TCT) hole saws cut more materials (up to 5x faster), last longer (up to 10x more holes), and cut deeper (maximum cut depth of 6-1/4-in) than conventional bi-metal saws. TCT hole saws cut wood, concrete block, brick, fiber cement board, ceramic wall tile, PVC, and more (with a Mohs hardness of less than 6). This extended cutting depth makes Spyder's Deep Cut hole saws excellent for stacked materials, deeper cuts, and for drilling through brick and concrete block. Note: Spyder TCT Deep Cut hole saws use Hex11 arbors/pilots which do not feature Rapid Core Eject technology; they cannot cut at an angle or enlarge existing holes. For use in standard rotary drills. Do not use in hammer drill mode. Not recommended for harder, abrasive materials.

Spyder   1/2-in Rapid Core Eject Quick Change Steel Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system.

Spyder   10 -Pack 1/2-in Rapid Core Eject Quick Change Steel Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying - drill hole, press button, pull back the hole saw, and eject the core - up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system.

Spyder   3/8-in Rapid Core Eject Quick Change Steel Hole Saw Arbor

Spyder's Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core — up to 5x faster than standard hole saw arbors. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Hex8 Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, or use your favorite hole saw (with a 5/8-18 thread) with the Spyder Rapid Core Eject™ arbor system.