Zurn Plumbing Installation Kits

PF WaterWorks   Disposal Installation Kit for 1-1/2-in Pipe

This Garbage Disposal Kit has all components needed to install a garbage disposal. It includes - (1) 1-1/2- In OD X 6- In Flanged Tailpiece, (1) 1-1/2- In OD X 14- In Flanged Tailpiece, (1) 1-1/2-In OD X 7-In Slip Joint Drain Arm, (1) Slip Joint End Outlet Tee, (1) 90 Degree Elbow, (1) Rubber Connection Boot with Barbed Adapter and Clamps, (1) 1-1/2-In OD Wall Drain Trap, (5) 1-1/2-In I.D. Polyethylene Washers and (1) Reducing Washer.

SharkBite   Kitchen/Lavatory sink Installation Kit for 1/2-in Pipe

The SharkBite faucet installation kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) push-to-connect straight stop valves, two 5 ft. coils of 1/4 in. PEX pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. swivel faucet connectors, and a 1/2 in. chrome trim cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite straight stop valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.

SharkBite   Tub and Shower Installation Kit for 1/2-in Pipe

SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 400-psi pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesn’t require a PEX tube liner. No soldering, clamps, unions, glue, or special tools are required for installation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)

VEVOR   Grease interceptor Installation Kit for 2-in Pipe

Grease Trap: The grease trap is made from high-quality materials, making it sturdy, durable, rust-proof, corrosion-resistant, and easy to clean; It has a high flow rate, ensuring continuous wastewater flow and a smooth grease capture process; The drainage outlet uses a threaded design for a tight connection with the plumbing, providing an excellent seal; Suitable for home kitchens, convenience stores, coffee shops, restaurants, and other commercial settings;; [Package Content] 1 x Grease Trap; 1 x Set of Accessories

VEVOR   Grease interceptor Installation Kit for 2-in Pipe

Grease Trap: The grease trap is made from high-quality materials, making it sturdy, durable, rust-proof, corrosion-resistant, and easy to clean; It has a high flow rate, ensuring continuous wastewater flow and a smooth grease capture process; The drainage outlet uses a threaded design for a tight connection with the plumbing, providing an excellent seal; Suitable for home kitchens, convenience stores, coffee shops, restaurants, and other commercial settings;; [Package Content] 1 x Grease Trap; 1 x Set of Accessories

SharkBite   Dishwasher Installation Kit for 1/2-in Pipe

The SharkBite dishwasher installation kit has everything you need to install your new dishwasher, it's fast and simple. Push-to-connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. dual outlet angle stop valve, 1 SharkBite 1/4 in. x 3/4 in. MPT elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT elbow, 1 SharkBite 1/4 in. stop valve adapter, 10 ft. coil of 1/4 in. PEX pipe, 2 disconnect clips (1/2 in. and 1/4 in.). The SharkBite dual outlet angle stop valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.

VEVOR   Grease interceptor Installation Kit for 2-in Pipe

Commercial Grease Interceptor 20 LBS: 20 LBS Capacity and 10 Gallon per Minute and with PTFE Tape; Our 20 LBS commercial grease interceptor is constructed of carbon steel with rust-proof coating, durable, sturdy, and applicable for various places; With a flow rate of 10 GPM (37.85 LPM), it is pretty convenient to filter solid waste, oil, and water in three steps from the comfort of fractional filtration; Considerate details and accessories are also integrated, such as detachable filter baffle, lifting handle, faucet outlet control, PTFE tape, and screw hole and cushion layer for sealing; Fractional Filtration; Coated Carbon Steel; Reliable Sealing Effect; Ease of Connecting; Well-Designed For Wide Use; [Package Content] 1 x Commercial Grease Interceptor; 1 x Connecting Pipe; 1 x Outlet Valve; 1 x PTFE Tape

SharkBite   Toilet Installation Kit for 1/2-in Pipe

The SharkBite toilet installation kit has everything you need to install your new toilet supply line. The kit includes 1 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) push-to-connect straight stop valve, a 5 ft. coil of 1/4 in. PEX pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 7/8 in. ballcock swivel toilet connector, and a 1/2 in. and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite straight stop valve works with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coil can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the ballcock toilet connector onto the toilet tank connection and then measure and cut the PEX and push into the outlet on the stop valve and the toilet connector and the installation is complete.

VEVOR   Grease interceptor Installation Kit for 2-in Pipe

Grease Trap: The grease trap is made from high-quality materials, making it sturdy, durable, rust-proof, corrosion-resistant, and easy to clean; It has a high flow rate, ensuring continuous wastewater flow and a smooth grease capture process; The drainage outlet uses a threaded design for a tight connection with the plumbing, providing an excellent seal; Suitable for home kitchens, convenience stores, coffee shops, restaurants, and other commercial settings;; [Package Content] 1 x Grease Trap; 1 x Set of Accessories

Zurn   Tub and Shower Installation Kit

Zurn’s 6-inch ductile iron slotted grate is designed for heavy-duty traffic. Backed with a 1-year warranty, building owners can rest easy knowing the durable construction will stand the test of time against extended wear and tear.

Zurn   Kitchen/Lavatory sink Installation Kit

Designed to withstand years of use in high-demand environments, Zurn's GT2700 series interceptor ensures only clean water will flow into your plumbing. It traps grease inside the unit without risk of corrosion, clogging or cross contamination. If you run a restaurant or operate a commercial kitchen, this solution will keep grease from building up in your pipes and your business turning out quality service as usual. Flow rate of 100 GPM and a grease capacity of 200 pounds. Backed with a 1-year warranty, building owners can rest easy knowing the durable construction will stand the test of time against extended wear and tear.

VEVOR   Grease interceptor Installation Kit for 2-in Pipe

Commercial Grease Interceptor 70 LBS: 70 LBS Capacity and 35 Gallon per Minute and with PTFE Tape; Our 70 LBS commercial grease interceptor is constructed of carbon steel with rust-proof coating, durable, sturdy, and applicable for various places; With a flow rate of 35 GPM (132.49 LPM), it is pretty convenient to filter solid waste, oil, and water in three steps from the comfort of fractional filtration; Considerate details and accessories are also integrated, such as detachable filter baffle, lifting handle, faucet outlet control, PTFE tape, and screw hole and cushion layer for sealing; Fractional Filtration; Coated Carbon Steel; Reliable Sealing Effect; Ease of Connecting; Well-Designed For Wide Use; [Package Content] 1 x Commercial Grease Interceptor; 1 x Connecting Pipe; 1 x Outlet Valve; 1 x PTFE Tape

Zurn   Kitchen/Lavatory sink Installation Kit for 3-in Pipe

Designed to withstand years of use in high-demand environments, Zurn’s GT2700 series interceptor ensures only clean water will flow into your plumbing. It traps grease inside the unit without risk of corrosion, clogging or cross contamination. If you run a restaurant or operate a commercial kitchen, this solution will keep grease from building up in your pipes and your business turning out quality service as usual. Backed with a 1-year warranty, building owners can rest easy knowing the durable construction will stand the test of time against extended wear and tear.

Zurn   Lavatory sink Installation Kit for 1-1/4-in Pipe

When it comes to durable finish plumbing supplies, Zurn has the parts you need to complete your commercial project. Zurn’s Z8746-PC open-grid lavatory drain strainer is constructed of durable, chrome-plated cast brass. The strainer fits sinks up to 2-1/2 in. deep and features a 17-gauge, 1-1/4 in. offset tailpiece. For genuine, reliable parts trust Zurn.

Zurn   Kitchen/Lavatory sink Installation Kit for 1-1/2-in Pipe

When it comes to durable finish plumbing supplies, Zurn has the parts you need to complete your commercial project. Constructed of chrome-plated cast brass, Zurn’s Z8700-8B-PC P-trap with wall bend enables water to form a seal in the drain trap. P-traps stop sewer gas from rising up through the drain, eliminating odors that may otherwise be present. The P-trap features a cleanout, brass nuts, and a shallow escutcheon with a compression inlet. For genuine, reliable parts trust Zurn.

Zurn   Kitchen/Lavatory sink Installation Kit for 1/2-in Pipe

When it comes to durable finish plumbing supplies, Zurn has the parts you need to complete your commercial project. Constructed of chrome-plated metal, Zurn’s ZR365L-PC low-inlet P-trap includes die-cast nuts and an escutcheon and does not have a cleanout. Complete your commercial plumbing project with genuine, reliable parts from Zurn.

Zurn   Toilet Installation Kit

Waterless urinals offer an odor and water-free solution where water conservation is a priority. Routine cleaning and maintenance helps them continue to perform at their peak. Zurn’s AquaGreen® sealant (part no. ZGS-128OZ) is a required in order to keep the Z5795 waterless urinal odor-free. It must be added any time the strainer, bell trap, or bell trap O-ring is replaced. When you need a replacement part for repair or maintenance of a waterless urinal, trust Zurn for genuine, reliable parts.

Zurn   Lavatory sink Installation Kit for 1-1/4-in Pipe

When it comes to durable finish plumbing supplies, Zurn has the parts you need to complete your commercial project. Zurn’s Z8743-8-PC solid top, open-grid pull-out plug is constructed of durable, chrome-plated cast brass. The 2-1/4-inch diameter plug fits sinks up to 2-1/4-inch deep. It features a 17-gauge, 1-1/4-inch by 8-inch long tailpiece and comes with cast brass lock and coupling nuts. For genuine, reliable parts trust Zurn.