Flex pipe elbow Flex Pipe Fittings & Risers

Orbit   3/4-in Schedule 40 PVC Adapter

Hose threads and pipe threads have different thread patterns. Hose-to-pipe fittings are a convenient way to connect them. Typical usage scenarios might include connecting a hose to an irrigation system or an irrigation component to the end of a hose. Their durable plastic construction ensures reliable use. A brass option is available if you require the highest level of durability. Use pipe thread tape on all male pipe threads (MPT) to ensure leak-free connections. Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.

Orbit   1/2-in MNPT x 1/2-in MNPT Cut-off riser

Riser pipes in rigid PVC allow you to connect from a sprinkler line, typically under the ground, to a hose faucet, drip manifold, shrub head, spray head, impact sprinkler, or gear-drive rotor. The wall thickness of PVC risers is thicker than Schedule 40 pipe which means it has greater rigidity and pressure rating. As plants grow you can extend the riser above the plants via addition of a coupling and another riser. Use a support stake to stabilize taller risers. When you no longer need a riser, you can simply thread a cap onto the end of it. Riser inlet/outlet sizes for residential applications are 1/2-inch, 3/4-inch, and 1-inch male pipe thread (MPT), with lengths spanning from just the pipe threads (“close nipple”) to 48 inches. Compatible with irrigation components from Orbit, Hydro-Rain, and other major brands. For outdoor irrigation use with cold water only.

Orbit   1/2-in Schedule 40 PVC Riser

Riser pipes in rigid PVC allow you to connect from a sprinkler line, typically under the ground, to a hose faucet, drip manifold, shrub head, spray head, impact sprinkler, or gear-drive rotor. The wall thickness of PVC risers is thicker than Schedule 40 pipe which means it has greater rigidity and pressure rating. As plants grow you can extend the riser above the plants via addition of a coupling and another riser. Use a support stake to stabilize taller risers. When you no longer need a riser, you can simply thread a cap onto the end of it. Riser inlet/outlet sizes for residential applications are 1/2-inch, 3/4-inch, and 1-inch male pipe thread (MPT), with lengths spanning from just the pipe threads (“close nipple”) to 48 inches. Compatible with irrigation components from Orbit, Hydro-Rain, and other major brands. For outdoor irrigation use with cold water only.

Orbit   1/2-in MNPT x 3/4-in MNPT Flexible riser

The multi-flex riser allows you to go around obstacles between pipe and sprinkler heads. It has 1/2-inch male pipe thread (MPT) ends which connect from a PVC tee or elbow with a 1/2-inch Female outlet to a sprinkler head with 1/2-inch female inlet. For applications which require longer flexible risers, we recommend Blu-Lock pipe and fittings. For non-constant pressure outdoor irrigation use with cold water only.

Orbit   1/2-in MNPT x 1/2-in MNPT Flexible riser

Multi-flex risers allow you to connect from a fitting, typically under the ground, to a hose faucet, drip manifold, shrub head, spray head, impact sprinkler, or gear-drive rotor. The semi-flexible material of the riser is ideal for tight places where the riser may be under constant, minor flex. The male x male version has male pipe thread (MPT) ends which connect from a PVC tee or elbow with a female outlet to a sprinkler head with female inlet. The male x female version is for adding an extension to a flexible riser or PVC riser. For applications which require longer flexible risers, we recommend Blu-Lock pipe and fittings. For non-constant pressure outdoor irrigation use with cold water only.

Orbit   1/2-in MNPT x 1/2-in MNPT Cut-off riser

1/2 x 6, cut off riser, molded black high grade polyethylene construction, full ASTM standard threads, cut off from 1 to 6 segments.

Orbit   1/2-in MNPT x 1/2-in MNPT Cut-off riser 10 -Pack

This riser is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.

Orbit   1/2-in MNPT x 3/4-in MNPT Saddle tee

The saddle tee is engineered to be a simple way to add a 1/2-inch male pipe thread (MPT) outlet to 3/4-inch or 1-inch poly pipe. The fitting body is constructed from impact-resistant ABS, an O-ring, and stainless steel screws.

Blazing   Barbed x 1/2-in FNPT Saddle Tee (Pack Of- 25)

The BLAZING saddle 1/2 in. FPT is for use with 3/4 in. polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

King Innovation   Barbed x 1/2-in FNPT Saddle Tee (Pack Of- 25)

The Blazing Saddle 1/2 FPT is for use with 1 in. PVC irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

King Innovation   Barbed x 1/2-in FNPT Saddle Tee (Pack Of- 25)

The Blazing Saddle 1/2 FPT is for use with 1 in. polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

Blazing   Barbed x 1/2-in FNPT Saddle Tee (Pack Of- 25)

The BLAZING saddle 1/2 In. FPT is for use with 1-1/4 In. PVC irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

Blazing   Barbed x 1/2-in FNPT Saddle Tee (Pack Of- 25)

The Blazing Saddle 1/2 in. FPT is for use with 1-1/4 in. polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

Blazing   Barbed X Barbed Saddle Tee (Pack Of- 25)

The BLAZING saddle swing pipe barb is for use with 1-1/4 In. PVC irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.

Blazing   Barbed x barbed Saddle tee 25 -Pack

The Blazing Saddle Swing Pipe Barb is for use with 1-in polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done.