Mister Landscaper Plastic Drip Irrigation Valves

Raindrip   0.625-in Compression Drip Irrigation On/Off Valve

Simplify watering to two areas with different watering needs with the Inline Valve. Use to control the flow of water to two separate watering circuits, irrigation zones, or different types of plants from one valve. Adjust, balance, or shut off water with a twist of the dial. Deliver water to two areas that don’t require the same amount of water, such as new plantings vs. established plants, or two areas with distinct types of plants. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Compression fittings on both sides of the valve accommodate 5/8 in. supply tubing with 0.700 in. outside diameter (OD). The 5/8 in. Compression Inline Valve is made of ABS treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. In-line valves connect to two lengths of supply tubing to control the flow of water to two different watering circuits, zones, or plants with different watering needs. Adjust, balance, or shut off water by turning the easy-grip dial. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   0.25-in Barbed Drip Irrigation On/Off Valve

Manage the flow of water to two areas with different watering needs using the Inline Valve. Install between two lengths of supply tubing to water two separate circuits, irrigation zones, or different types of plants. Adjust, balance, or shut off water flow with a twist of the dial. Works great for watering one area with new plantings and another with established plants; or two distinct plant zones that don’t require the same amount of water. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Barbed fittings on both sides of the valve accommodate 1/4 in. supply tubing with 0.170 in. internal diameter (ID). The 1/4 in. Barbed Inline Valve is made of ABS treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. In-line valves connect to two lengths of supply tubing to control the flow of water to two different watering circuits, zones, or plants with different watering needs. Adjust, balance, or shut off water by turning the easy-grip dial. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Rain Bird   0.625-in Barbed Drip Irrigation On/Off Valve

Easily adjust or shut off flow in 1/2 in. or 5/8 in. drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.

Rain Bird   0.25-in Barbed Drip Irrigation On/Off Valve 2 -Pack

Rain Bird BVAL25 Drip Irrigation 1/4" Barbed Valve, Fits All Sizes of 1/4" Tubing, 2-Pack. Install this robust barbed valve to quickly adjust or shut off flow in 1/4" Drip tubing runs. Helps prevent over or under watering of plants with different moisture needs. Top cap turns to adjust or completely shut-off water flow; ideal for use when making repairs or refining flow to specific plants or watering zones. High-quality barbs grab all brands/sizes of 1/4" Drip tubing creating a fast, secure and leak-proof connection. Barbed end may also be inserted into 1/2" diameter or larger Drip tubing to extend and control water flow to individual plants or containers. Constructed of highly durable UV and chemical-resistant materials to assure long life. Designed for working pressure of 0-50 PSI. Simple to insert by hand or for faster installation use one of Rain Bird’s insertion tools: ET/1PK25S, HPUN1-1S, HPTCX, (sold separately). Rain Bird “The Intelligent Use of Water”

Orbit   1-in NPT Drip Irrigation 4-in-1 Valve

The 3-in-1 is a combination filter, pressure regulator, and drip adapter for micro watering applications where clean water and low pressure are important for optimum performance. It connects to a 1-inch female pipe thread (FPT) automatic irrigation valve to form what is called a ”drip control zone.” It is compact enough to fit four valves side-by-side in a standard rectangular valve box using a manifold. The filter is made from fine 120-mesh stainless steel and has a flush port on the top for easy cleaning. The compact pressure regulator reduces pressure to 30 PSI while maintaining flow up to 5 gallons per minute (GPM). Both the inlet and outlet are 1-inch male pipe thread (MPT). The Drip-Lock adapter connects to 17mm or .700 inch drip blank distribution tubing. The 3-in-1 is compatible with valves from Orbit, Hydro-Rain, and other major brands. We recommend B-hyve controllers for optimum water conservation. For outdoor irrigation use with cold water only.

Orbit   1-in NPT Drip Irrigation 4-in-1 Valve

The 4-in-1 drip valve is a combination automatic jar-top valve, filter, pressure regulator, and drip adapter for micro watering applications where clean water and low pressure are important for optimum performance. It is also called a “drip control zone.” It is compact enough to fit four valves side-by-side in a standard rectangular valve box using a manifold. The valve features an easy-to-service jar-top design, a 24 VAC solenoid, manual actuation lever, and bleed screw. The filter is made from fine 120-mesh stainless steel and has a flush port on the top for easy cleaning. The compact pressure regulator reduces pressure to 30 PSI while maintaining flow up to 10 gallons per minute (GPM). Both the inlet and outlet are 1-inch male pipe thread (MPT). The Drip-Lock adapter connects to 17mm or .700 inch drip blank distribution tubing. The 4-in-1 valve is compatible with all major brands of 24 VAC irrigation controllers. We recommend B-hyve controllers for optimum water conservation. For outdoor irrigation use with cold water only.

Rain Bird   1/2-in x 500-ft Drip Irrigation Distribution Tubing

1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers.

Raindrip   Drip Irrigation Patio Kit

Save time and money when you switch from watering plants by hand to effortless drip irrigation. The Automatic Watering Kit with Timer for Containers and Hanging Baskets has everything you need to water up to 20 individual plants with precision watering for optimal growth and health. The #1 bestseller includes a timer to automate watering; 75 ft. of 1/4 in. supply tubing and adapter to connect to a faucet; 201/2 GPH pressure-compensating (PC) drippers, 20 stakes, 10 clamps, plus barbed couplings, elbows, tees, and end plug. Set, connect, and water—the easy 3-step installation gets you drip-ready in minutes. Drip irrigation systems are easy to customize, install, and operate. Raindrip Automatic Watering Kits contain all the components you need to set up your own drip irrigation system, and are ideal for any level gardener. The comprehensive kits can be installed in just three steps. Components work well with other Raindrip products, making it simple to expand your drip system to fit your landscape needs. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   1/4-in x 100-ft Drip Irrigation Distribution Tubing

Supply water directly to your plants with 1/4 in. distribution tubing. Attach tubing to the main line to create a feeder line that delivers water to a low-flow, drip-watering device, or use as a main line in a smaller drip system. The quarter-inch tubing, also known as micro tubing or spaghetti tubing, has an outside diameter (OD) of 0.250 in. and internal diameter (ID) of 0.170 in. While other manufacturers use blended recycled material to construct their entire tubing, Raindrip poly tubing is engineered in layers for durability using 100% virgin content for its outer and inner layers, with a middle layer of recycled content.Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, the supply tubing transports water to the area to be irrigated. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Rain Bird   1/2-in x 100-ft Drip Irrigation Distribution Tubing

1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers.

Rain Bird   1/2-in x 100-ft Drip Irrigation Emitter Tubing

Designed for multi-season use, this rugged Rain Bird 1/2 in. emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. With 0.9 GPH (gallons per hour) built-in emitters spaced every 18 in., the tubing waters evenly from beginning to end of its layout in your planting area. Just cut, place and connect in any arrangement using Rain Bird 1/2 in. barbed or easy-fit compression fittings and stakes (purchased separately). The emitters are designed for clog-resistant flow. Other professional grade quality features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage.

Orbit   1/2-in x 100-ft Drip Irrigation Distribution Tubing

Orbit’s 1/2-inch drip blank distribution tubing has a nominal outside diameter of 0.700 inch which is common in retail residential installations. Made of low-density polyethylene (LDPE), it is designed with flexible characteristics which make it suitable for a variety of landscape designs. Use 1/2-inch drip blank distribution tubing with Drip-Lock fittings to carry water from a drip valve or hose faucet to a zone of drip-watered plants. This tubing is “blank” which means it is a continuous run of tubing without any pre-installed emitters in it. Use a Drip Punch Tool to insert 1/4-inch barb drip fittings or emitters at points close to each plant. Since the outside diameter of 1/2-inch tubing may vary by manufacturer, we recommend using Orbit Universal Drip Fittings when connecting to non-Orbit drip systems. We also strongly recommend using a 2-in-1 filter and pressure regulator for all drip zones. For non-constant pressure outdoor irrigation use with cold water only.