Drip irrigation female adapter Drip Irrigation Fittings

Orbit   1/2-in Polyethylene Threaded Drip Irrigation Female Adapter

Orbit’s 1/2-inch universal drip distribution and emitter tubing dimensions vary according to manufacturers. Universal Drip Fittings are designed with an insert barb and outer collar which ensure a tight connection across a range of 1/2-inch tubing sizes from 16mm to .710. This makes them especially useful for repairs of non-Orbit drip systems. The barb and collar design make it possible to remove and reuse the fittings. For Orbit and all other .700-inch tubing from major manufacturers we recommend Drip-Lock fittings because of their ease of insertion and release. For outdoor irrigation use with cold water only.

Raindrip   5/8-in Plastic Compression Drip Irrigation Tee

Convert a hose bibb or garden hose to a low-flow drip system with the 5/8 in. X 3/4 in. FHT Compression Swivel Tee. The compression fitting has two 5/8 in. compression outlets and one 3/4 in. female hose thread swivel inlet. Screw swivel hose thread onto a standard 3/4 in. MHT connection point; fit 5/8 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Orbit   1/4-in Polyethylene Barbed Drip Irrigation End Cap 25 -Pack

Orbit 1/4-inch drip plug presses into the inside of 1/4-inch drip tubing and are held firmly in place by a barb. They come in a variety of shapes, including tees, elbows, couplings, and plugs, which allows them to satisfy the needs of many different garden layouts and container sizes. Drip fitting assortment packs are a convenient way to purchase a variety of fittings. Use the drip tubing punch tool to create a hole in 1/2-inch drip tubing which makes it easy to insert a 1/4-inch fitting into the tubing. For outdoor irrigation use with cold water only.

Raindrip   3/4-in Plastic Compression Drip Irrigation Female Adapter

Make the transition from hose bibb or garden hose to 0.710 distribution tubing or dripline with the 0.710 in. X 3/4 in. FHT Compression Adapter. On one end, a filter washer inside the adapter screens out particles before they can clog the system, and also ensures a tight bond when the fitting is tightened. The 0.710 in. tubing is inserted into the other end, where an internal barb compresses the tube to hold it in place. The compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Orbit   1/4-in Polyethylene Barbed Drip Irrigation Flow Controller 5 -Pack

Orbit 1/4-inch drip fittings press into the inside of 1/4-inch drip tubing and are held firmly in place by a barb. They come in a variety of shapes, including tees, elbows, couplings, and plugs, which allows them to satisfy the needs of many different garden layouts and container sizes. Drip fitting assortment packs are a convenient way to purchase a variety of fittings. Use the drip tubing punch tool to create a hole in 1/2-inch drip tubing which makes it easy to insert a 1/4-inch fitting into the tubing. For outdoor irrigation use with cold water only.

Orbit   1/2-in Polyethylene Threaded Drip Irrigation Coupling

Orbit’s 1/2-inch universal drip distribution and emitter tubing dimensions vary according to manufacturers. Universal Drip Fittings are designed with an insert barb and outer collar which ensure a tight connection across a range of 1/2-inch tubing sizes from 16mm to .710. This makes them especially useful for repairs of non-Orbit drip systems. The barb and collar design make it possible to remove and reuse the fittings. For Orbit and all other .700-inch tubing from major manufacturers we recommend Drip-Lock fittings because of their ease of insertion and release. For outdoor irrigation use with cold water only.

Orbit   1/2-in Polyethylene Push-Fit Drip Irrigation Female Adapter

Drip-Lock fittings connect 1/2-inch drip distribution or emitter tubing to a sprinkler line, hose faucet or valve. They fit 1/2-inch sizes ranging from .630-inch to .700-inch. Stainless steel teeth grip the pipe tightly and a special O-ring creates a watertight seal while still allowing for rotation of the fitting after insertion A built-in removal collar allows for easy reconfiguration and reuse of the fittings, including end-of-season disassembly for compact winter storage. The Drip-Lock manifold is an especially convenient way to connect 1/2-inch distribution tubing to 1/4-inch distribution tubing which can then go to each individual plant. For outdoor irrigation use with cold water only.

Orbit   1/2-in Polyethylene Compression Drip Irrigation Female Adapter

This faucet adapter connects to all major brands of 1/4 In." distribution tubing.