Drip irrigation flag dripper Drip Irrigation Emitters & Micro Sprays

Raindrip   13 GPH Full-Circle Drip Irrigation Multi-Dripper Combination Assembly

Save time installing your drip system with the Adjustable Flow Bubbler Assembly. The bubbler, stake, and inlet come preassembled and ready to install. Connects with the patented Clamp N Pierce® connector which snaps the inlet into supply tubing at once. The 8-stream bubbler emits water in a full-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Use the control dial to increase or decrease the output of water to your preference. Bubbler and tubing made of polyethylene; stake and connector made of ABS; all materials treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. The Bubbler Assembly comes preassembled with bubbler, stake, adjustable riser, and Clamp N Pierce inlet; ideal for groundcover, flower and vegetable gardens, trees and shrubs. Raindrip offers an emitter for every watering need

Orbit   2 GPH Drip Irrigation Dripper 10 -Pack

Pressure compensating drip emitters are fast becoming the most popular way to precisely apply water to individual plants. Unlike drip emitter tubing, which has the emitters pre-installed in the tubing at equal intervals, drip emitters give you flexibility to insert emitters with the same or different flow in 1/2-inch “blank” (meaning no emitters are pre-installed) distribution tubing at any interval. This is especially useful in shrub areas with different size plants and random spacing. Another advantage of drip emitters is that you can replace them with higher or lower flow emitters or entirely change the spacing as the landscape matures. Pressure compensation is achieved by a flexible flat diaphragm disc which keeps the flow constant across a range of pressures. This is especially important when multiple emitters are used over a long run of tubing. Pressure compensating drip emitters have a removable cap which allows for easy cleaning of the diaphragm. Use a drip punch tool to create a hole in 1/2-inch tubing and insert the 1/4-inch barb on the emitter into the tubing or insert the barb directly into the end of 1/4-inch drip tubing. Available flows are 1/2, 1, 2 and 4 gallons per hour (GPH). Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.

Orbit   1 GPH Drip Irrigation Dripper 10 -Pack

Pressure compensating drip emitters are fast becoming the most popular way to precisely apply water to individual plants. Unlike drip emitter tubing, which has the emitters pre-installed in the tubing at equal intervals, drip emitters give you flexibility to insert emitters with the same or different flow in 1/2-inch “blank” (meaning no emitters are pre-installed) distribution tubing at any interval. This is especially useful in shrub areas with different size plants and random spacing. Another advantage of drip emitters is that you can replace them with higher or lower flow emitters or entirely change the spacing as the landscape matures. Pressure compensation is achieved by a flexible flat diaphragm disc which keeps the flow constant across a range of pressures. This is especially important when multiple emitters are used over a long run of tubing. Pressure compensating drip emitters have a removable cap which allows for easy cleaning of the diaphragm. Use a drip punch tool to create a hole in 1/2-inch tubing and insert the 1/4-inch barb on the emitter into the tubing or insert the barb directly into the end of 1/4-inch drip tubing. Available flows are 1/2, 1, 2 and 4 gallons per hour (GPH). Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.

Raindrip   21.8 GPH Full-Circle Drip Irrigation Micro Spray 10 -Pack

Make changes to water flow rate and throw quickly and easily with the Adjustable Flow Bubbler. Featuring a convenient dial to control the water, simply turn the knob to discharge the amount of water to your preference—from the shutoff position at 0 to 21.6 GPH, and up 62 in. radius at pressures between 20-40 PSI. Water is released in a fan spray, full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   11 GPH Full-Circle Drip Irrigation Bubbler 5 -Pack

Convert your existing sprinkler system to a low flow watering system with the Adjustable Flow Bubbler. Built-in 10-32 threaded inlet attaches directly to the rigid riser. Easily control the water flow by turning the knob to the amount of water you prefer, from shutoff position up to 11.7 GPH, and up 16 inch radius at pressures between 15-50 PSI. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need.

Raindrip   13 GPH Half-Circle Drip Irrigation Multi-Dripper Combination Assembly

If you thought setting up a drip irrigation system is time consuming and a lot of hard work, think againch The Adjustable Flow Bubbler Assembly comes preassembled for a faster install. Easy to connect with patented Clamp N Pierce® connector which snaps inlet into supply tubing by hand—no tools required. The 4-stream bubbler emits water in half-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Dial allows you to control output with a twist. Bubbler and tubing are made of polyethylene; stake and connector are made of ABS; all materials treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. The Bubbler Assembly comes preassembled with bubbler, stake, and Clamp N Pierce inlet; ideal for groundcover, flower and vegetable gardens, trees and shrubs. Raindrip offers an emitter for every watering need

Raindrip   24 GPH Quarter-circle Drip Irrigation Micro Spray 5 -Pack

Deliver precise watering to your plants to help them grow and thrive. With the Adjustable Flow Micro Sprinkler, you can increase or decrease the volume of water released with a twist of a dial. Water is released in a fan spray, quarter-circle pattern at up to 23.9 GPH with an adjustable radius of 4.4 ft. (at 15-50 PSI). Ideal for groundcover, flower beds, planting beds, vegetable gardens, and new plantings. The 10-32 threaded inlet screws onto a rigid riser—no tools necessary to install. The Micro Sprinkler, also known as a Micro Sprayer, is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow micro sprinklers are tiny but mighty sprayers, with adjustable flow to deliver perfect coverage. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   1 GPH Drip Irrigation Dripper 50 -Pack

Get the same, consistent amount of water to each plant with the 1 GPH Pressure Compensating Dripper. PC emitters deliver the same output regardless of changes in water pressure or where the emitter is placed on the tubing. The self-cleaning emitters with turbulent flow carry sediments out of the system to reduce clogging. Connects to 1/4 in. tubing or attaches directly into 1/2 in., 5/8 in., or 0.710 in. supply tubing. Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets. Dripper is made of polyethylene and silicone treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. Pressure compensating emitters are designed to maintain a constant flow rate at varying inlet pressures and at each position along the length of tubing. Water is delivered directly to your plant’s root zone at a very slow, steady application rate for optimal growth and overall health. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.

Raindrip   13 GPH Half-circle Drip irrigation multi-stream dripper stake

This assembly comes with a stake, 2-ft of 1/4-in tubing, clamp-n-pierce fitting and adjustable sprayer. It is pre assembled to easily attach to a pre existing hose. Just snap it onto the supply line and put the stake where you want it an you're done.

Orbit   1 GPH Drip Irrigation Flag Dripper 10 -Pack

This one GPH flag dripper is ideal for spot watering trees and shrubs. The easy to remove top makes for easy cleaning.

Rain Bird   0.5 GPH Drip Irrigation Dripper 10 -Pack

Rain Bird drip irrigation is an ideal watering solution that will provide great results while saving you water. Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but it's the most convenient and efficient way to water. Rain Bird emitters are color coded to easily identify flow rate.

Orbit   1 GPH Drip Irrigation Dripper 10 -Pack

Drip emitters precisely apply water to individual plants. They are especially useful in shrub areas with different size plants and random spacing. An advantage of drip emitters over drip emitter tubing with preinstalled emitters is that you can replace them with higher or lower flow emitters or entirely change the spacing as the landscape matures. These emitters do not include pressure compensation which makes them best-suited for drip manifolds. The 1/4-inch barb on the emitter inserts directly into the end of 1/4-inch drip tubing and you can then place the emitter at the perimeter of each plant. You can hold the emitter in place at each plant with a drip tubing stabilizer stake. Available flows are 1, 2 and 4 gallons per hour (GPH). Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.

Rain Bird   1 GPH Drip Irrigation Dripper

Rain Bird drippers are made to the highest standard. Giving the user the flexibility to use them in many climates. Great for a new install, or if you are retrofitting an existing system.

Rain Bird   2 GPH Drip Irrigation Dripper

Rain Bird drippers are made to the highest standard. Giving the user the flexibility to use them in many climates. Great for a new install, or if you are retrofitting an existing system.

Rain Bird   1 GPH Drip Irrigation Dripper 10 -Pack

Rain Bird drippers are made to the highest standard. Giving the user the flexibility to use them in many climates. Great for a new install, or if you are retrofitting an existing system.

Orbit   29 GPH Full-Circle Drip Irrigation Micro Spray 5 -Pack

The micro-sprinkler is an ideal sprinkler for watering annuals in a flowerbed or vegetable garden. It includes a flow control knob to adjust spray distance from 10 to 5 feet at typical operating pressure of 30 PSI. The 10-32 male thread (MT) inlet on the multi-stream emitter connects to an optional 6 or 12-inch drip stake with 10-32 female thread (FT). You can either run 1/4-inch drip tubing from the stake to a drip manifold, a 1/2-inch drip tubing “lateral” line, or directly off the hose faucet with a 1/4-inch hose faucet x 1/4-inch adapter. Available patterns include full, half, quarter, and center strip. Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.

Orbit   29 GPH Quarter-Circle Drip Irrigation Micro Spray 5 -Pack

The micro-sprinkler is an ideal sprinkler for watering annuals in a flowerbed or vegetable garden. It includes a flow control knob to adjust spray distance from 10 to 5 feet at typical operating pressure of 30 PSI. The 10-32 male thread (MT) inlet on the multi-stream emitter connects to an optional 6 or 12-inch drip stake with 10-32 female thread (FT). You can either run 1/4-inch drip tubing from the stake to a drip manifold, a 1/2-inch drip tubing “lateral” line, or directly off the hose faucet with a 1/4-inch hose faucet x 1/4-inch adapter. Available patterns include full, half, quarter, and center strip. Recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.