Drill America Taps

DEWALT   3/8-in-16 2 -Flute HSS Drill Tap with Drill Bit

Drill and tap holes in one application and deburr and countersink in a single step with DEWALT IMPACT READY® Tap and Drill Bits. Designed for impact drivers, each bit is equipped with a speed tip to penetrate materials quickly. Crafted for extreme durability to withstand tough jobsite conditions.

IDEAL   8-32 6 -Flute High carbon steel Taper Tap

Twist-a-Nut™ triple-tapping tool includes 10-32, 8-32, 6-32 taps on one tapping side and 10-24, 12-24 and 1/4 - 20 on the other. It creates a new burred thread and reforms, clean the obstruction in the existing threads. It has interchangeable with 7-in-1 screwdriver and conduit demurrer. It is provided with cushioned handles with three clearly marked thread sizes on each end and helps install twist on wire connectors with ease.

Drill America   1-1/2-in-11-1/2 NPT 7 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   Set 4 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

DEWALT   5/16-in-18 2 -Flute HSS Drill Tap with Drill Bit

The DEWALT® 5/16-in 18 UNC drill tap is designed to be used with impact drivers. It allows you to drill and tap holes in one application, and also deburring and countersink in one step. It offers a speed tip which penetrates material quickly, along with a hex shank for use in impact drivers.

Drill America   3-in-8 NPT 8 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   2-in-11-1/2 NPT 7 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   1-1/4-in-11-1/2 NPT 5 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   1-in-11-1/2 NPT 5 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   Set 4 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   Set 5 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or James pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   2-1/2-in-8 NPT 8 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   3-1/2-in-8 NPT 9 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   6-in-8 NPT 10 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   4-in-8 NPT 9 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Drill America   5-in-8 NPT 9 -Flute Carbon steel NPT (pipe) Tap

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Kobalt   24 -Piece Standard (SAE) Tap and Die Set

This kit comes with a full range of most popular metric taps and dies with both coarse and fine sizes, plus all needed wrenches, handles, and a storage case. Cut new material or chase lightly damaged threads and recover old screws, rusty nuts and bolts, and spark plugs.

GEARWRENCH   77 -Piece Metric and standard (SAE) Tap and Die Set

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.

GEARWRENCH   114 -Piece Metric and standard (SAE) Tap and Die Set

GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back-and-forth movement required while cutting threads on either taps or dies. The 5-degree ratcheting arc with reversing lever eliminates hand-over-hand turning. The hex die adapters work on either round or hex-shaped dies. The taps and dies are made from high-quality carbon tool steel. The ratcheting I-handle systems are perfect for the master mechanic or machine shop. Packed in a durable blow-molded case for secure storage and portability.