15mm Hex Keys & Torx Keys

Bondhus   Metric and standard (SAE) 22 -Pieces Hex key set

Stubby Ball End L-wrenches fit into tight spaces standard hex keys cannot.They eliminate the need to trim and file the short arm. The tighter inside radius means full smooth entry into the screw head. The chamfered short arm eliminates burrs. The ball end inserts into a screw at a 25° angle.

Project Source   Assorted Metric 8 -Pieces Hex key set

The Project Source 7-Piece SAE Hex Key Set features steel construction for strength and durability. These keys have short arms and resist rotational distortion. This 7-piece set includes a range of SAE hex keys. The hex keys have a flat end with a polished chrome finish.

Bondhus   T-Handle Metric 8 -Pieces Hex key set

Bondhus Ball End T-handles feature solid steel handles with a welded handle/blade connection. The flywheel effect saves time. The T-handles feature an ergonomic handle design and a smooth, non-porous handle coating. The handle coating extends along the blade.

Bondhus   Metric 9 -Pieces Hex key set

Bondhus Ball End L-wrenches with ColorGuard finish insert into a screw at a 25 angle allowing natural hand and wrist movement. Color-coded tools can be distinguished at a glance and sizes are stamped on the tool. Every hex key l-wrench is designed and machined to achieve an optimal fit between tool and fastener. Tools insert quickly and easily into screw head and fit snug to generate greater torque and minimize slippage and stripping. Bondhus professional quality tools provide superior value and offer a lifetime warranty.

CRAFTSMAN   Assorted Metric and standard (SAE) 2 -Pieces Hex key set

High visibility Hex Key sets make these easy to find and put your hands on. With a durable composite construction , the rubber side inserts allow for a secure grip. Chamferred edge helps guide the wrench for a smooth easy entry into the hex key. All backed by a lifetime warranty.

TEKTON   1.3-10 mm Assorted Metric 15 -Pieces Ball End Hex key set

The Tekton 15-pc. Ball End Hex Key Set keeps the most common metric hex key sizes from 1.3 to 10 mm stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.

Bondhus   8 -Pieces Torx key set

Bondhus TORX L-Wrenches with ProGuard finish fit all TORX and Star screws. The broad contact surface provides deep lobe engagement and the straight, vertical sidewalls increase tool engagement and virtually eliminates camout. Bondhus professional quality tools provide superior value and offer a lifetime warranty.

TEKTON   5/64-3/8 inch, 2-10 mm Assorted T-Handle Metric and standard (SAE) 21 -Pieces Hex key set

Tekton T-handle keys have two ends—both a ball-end long arm for spinning out fasteners, as well as a short, flat-end side drive for breaking loose fasteners. The large, contoured handle is designed to comfortably fit your in your hand as you apply torque from various positions. The steel key is made from 8660 nickel chromium molybdenum steel and held to high tolerance standards so you can count on a proper, snug fit every time. The included 18 gauge stand is specially designed to make accessing and organizing your keys as smooth as possible, with open slots that guide each tool into place.

Beta   Metric 9 -Pieces Ball End

The 96BPC series of Allen hex keys are designed for professional use. The satin-finish chrome plating wipes down easily after use. The short leg and the extended leg of the L-handle both have the same metric hex. The hex at the end of the extended leg has a ball profile to allow up to 30 degrees of misalignment with the fastener. This 9-piece set of hex keys includes a folding case that locks all the keys in place when you snap it closed. The interior of the case has a molded strip on each side and closing the case forces the strips against the keys to positively lock them in place. When you open the case, pressure is released and the case acts like an ordinary holder. This set includes the following metric sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm.

Bondhus   Metric 1 -Pieces Hex key

Bondhus tools are designed and manufactured to be strong and save time. Bondhus' exclusive manufacturing processes ensure the highest level of machining consistency as each tool is machined to incredibly tight tolerances. The chamfered tip makes insertion of the tool into a screw head much easier. Bondhus hex tools always insert smoothly and seat to full depth for optimal torque and longer tool life. All Bondhus tools are manufactured with Bondhus' exclusive Protanium steel, which is up to 20 percent stronger than competitor tools.

Bondhus   Standard (SAE) 1 -Pieces Hex key

Bondhus L-wrenches feature chamfered tool tips which eliminate burrs and help tools seat in the screw head. The sharp corners transfer more torque to the screw andreduce stripping. The L-wrenches are precision machined for ease of use and superior fit.

Bondhus   Standard (SAE) Hex key

Bondhus L-wrenches feature chamfered tool tips which eliminate burrs and help tools seat in the screw head. The sharp corners transfer more torque to the screw andreduce stripping. The L-wrenches are precision machined for ease of use and superior fit.

Bondhus   Metric 7 -Pieces Hex key set

Compact Balldriver L-wrench sets are perfect where a variety of tool sizes are required. All sets are packaged in our patented Bondhex tool case. Wrenches slip easily into individually marked slots and twist to lock securely in place. Only available from Bondhus, Protanium steel means these are the strongest ballpoint L-wrenches available. Product 7 Pc. Set (1.5 - 6mm)

Bondhus   10 -Pieces Torx key

HEX-PRO Pivot Head Hex and Torx Wrenches fit inch and metric hex, TORX, and star screws. Allow tool users to insert wrench into socket head screw one time only, pivoting around obstacles. They are available in 25 sizes to cover most fastener heads and are made with heat treated high quality industrial tool steel. Long handles for extra reach and a matte chrome finish to prevent corrosion. Forged hinges provide a simple, effective, patented design. Fewer pieces make Pivot Head Hex and TORX wrenches stronger and less likely to break than competitors.

Bondhus   Standard (SAE) Hex key

Bondhus tools are designed and manufactured to be strong and save time. Bondhus' exclusive manufacturing processes ensure the highest level of machining consistency as each tool is machined to incredibly tight tolerances. The chamfered tip makes insertion of the tool into a screw head much easier. Bondhus hex tools always insert smoothly and seat to full depth for optimal torque and longer tool life. All Bondhus tools are manufactured with Bondhus' exclusive Protanium steel, which is up to 20 percent stronger than competitor tools.