Clamps & Vises

Jorgensen   48-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader. Clamping faces are 3-3/4-in height and 1-7/8-in. width, high-carbon steel bar is 1-3/16-in x 3/8-in, screw is 5/8-in cold-drawn steel with special, smoothly cut acme threads, large easy to grip handle and load limit is 1,500 lbs.

Jorgensen   36-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader.

Jorgensen   4-Pack Assorted 600lb Bar Clamp

The Jorgensen medium duty steel bar clamp is our most popular clamp. They are used by do-it-yourself, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types. It is a sliding head design: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad. All adjustments are made in the movable sliding head, making this style fast acting, easy to open and close and suitable for close quarters clamping. You can easily move the sliding head up and down the bar. The 3/8 In. steel screw with easy grip handle and 3/4 In. diameter plated steel swivel can be tightened or loosened to meet your exact pressure needs. This item includes 2 pack of 6 in bar clamp and 2 pack of 12 in bar clamp which have 2-1/2 In. reach and 600 Lb. load limit. The strong, light weight 1/4 In. x 3/4 In. steel bars are plated to be rust resistant. The multiple-disc-clutch design consist of two hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar. The iron castings have an orange baked enamel finish.

Jorgensen   24-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader. Clamping faces are 3-3/4 In. height and 1-7/8 In. width, high-carbon steel bar is 1-3/16 In. x 3/8 In., screw is 5/8 In. cold-drawn steel with special, smoothly cut acme threads, large easy to grip handle and load limit is 1,500 lbs.

Jorgensen   4-in 300-lb Bar Clamp

Our Jorgensen style 3700-LD light duty steel bar clamps are ideal for all types of light duty clamping and is a workhorse for its size and design. They are used by do it yourself, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types. Protective pads made of thick, durable plastic protect your work. Clamps rest parallel on work surface for ease of work placement and adjustment. It is a sliding head design: the sliding head is threaded to accommodate the screw with our easy grip handle and swivel pad. All adjustments are made in the movable sliding head, making this style fast acting, easy to open and close and suitable for close quarters clamping. You can easily move the sliding head up and down the bar. The 5/16 In. steel screw with our easy grip handle and 3/4 In. diameter plated steel swivel can be tightened or loosened to meet your exact pressure needs. It has a 2 In. reach and a 300 Lb. load limit. The strong, light weight 3/16 In. x 5/8 In. steel bars are plated to be rust resistant. The multiple-disc-clutch design consist of two hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.

IRWIN   QUICK-GRIP 4 -Pack Assorted Mini One Handed 140-lb Bar Clamp

The IRWIN QUICK-GRIP™ one-handed mini bar clamp set is the perfect clamp set for smaller projects and working in confined spaces. The reinforced resin bodies and hardened steel bars ensure strength and durability.

Jorgensen   36-in 1000-lb Bar Clamp

Our Jorgensen style 3700-HD heavy duty steel bar clamps are ideal for all types of heavy duty clamping and is a workhorse for its size and design. They are used by do it your sellers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types. Protective pads made of thick, durable plastic protect your work. Clamps rest parallel on work surface for ease of work placement and adjustment. It is a sliding head design: the sliding head is threaded to accommodate the screw with wood handle and swivel pad. All adjustments are made in the movable sliding head, making this style fast acting, easy to open and close and suitable for close quarters clamping. You can easily move the sliding head up and down the bar. The 1/2 In. steel screw with a easy grip handle and 1-3/16 In. diameter plated steel swivel can be tightened or loosened to meet your exact pressure needs. It has a 3 In. reach and a 1,000 Lb. load limit. The strong, light weight 1 In. x 5/16 In. steel bars are plated to be rust resistant. The multiple-disc-clutch design consist of three hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar.

Pony   14 -Pack Assorted 50-lb Spring Clamp

Pony plastic spring clamp set includes 6 pc. 3/4 In., 4 pc. 1 In., 2 pc. 2 In. and 2 pc. 3 In. plastic spring clamp. Style 3260 plastic spring clamps features instant opening and closing. Light-weight plastic jaws are designed for comfortable yet durable use. Soft, pivoting jaw pads easily hold irregular-shaped objects and protect work pieces. Ideal for gluing models, crafts and various other projects that require instant opening and closing and where fast, easy application to or removal from the work is required. Jaws and handles are glass filled nylon. Spring is heavy-duty tempered steel for maximum strength. Jaw pads are plastic. Available in 3/4, 1, 2, and 3 In. opening capacity and reach.

BORA   96-in NGX 160-lb Edge Clamp

It’s never been easier to rip, cut, and break down material than with the NGX quick connect clamp edge system. No more fumbling with adjustable clamp ends on opposite sides of the straight edge, the adjustable clamp is connected to the handle. Simply hook the clamp edge across your board, line it up with your cut, and clamp it down, all without walking around the material. The NGX quick connect system allows you to break down material more accurately and faster than ever.

Jorgensen   24-in 600-lb Bar Clamp

Our 3724 has a 24 In. opening capacity, a 2-1/2 In. reach and a 600 Lb. load limit. The strong, light weight 1/4 In. x 3/4 In. steel bars are plated to be rust resistant. The multiple-disc-clutch design consist of two hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar. The iron castings have an orange baked enamel finish.

Pony   3/4in 1200-lb Pipe Clamp

Pony style 50 clamp fixture for 3/4 In. black pipe is ideal for metalworking, woodworking and frame assembly - in applications that range from do-it-yourself to industrial production. Mounts on any length 3/4 In. black pipe with both ends threaded (pipe not furnished). One set of Pony clamp fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe. Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end. Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped. Pony clamp fixtures are interchangeable from one pipe length to another, so one set can serve several needs.

Jorgensen   72-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader.

Jorgensen   60-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader.

Jorgensen   18-in Cabinet Master 1500-lb Parallel Jaw Clamp

The Jorgensen cabinet master bar clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader. Opening capacity is 12 inches, clamping faces are 3-3/4 in. height and 1-7/8 in. width, high-carbon steel bar is 1-3/16 in. by 3/8 in., screw is 5/8 in. cold-drawn steel with special, smoothly cut acme threads, large easy to grip handle, and load limit is 1,500 lbs.

Pony   2-in 44-lb Spring Clamp

Pony style 3200 steel spring clamps spring allows instant opening and closing where fast, easy application to or removal from the work is required and where spring pressure is adequate. It is ideal for use on metal, wood, plastic and fabric - in applications that range from do-it-yourself to industrial production. Handle contours enable comfortable use. Non-slip jaws become parallel at maximum opening capacities. Point of pressure always remains near jaw tips throughout the entire range of openings, to hold where needed. Jaws are light weight, nickel plated steel. Spring is heavy duty tempered steel for maximum strength. Handles are designed for optimum comfort with minimized spread.

Pony   2-in 50-lb Spring Clamp

Pony style 3260 plastic spring clamps features instant opening and closing. Light-weight plastic jaws are designed for comfortable yet durable use. Soft, pivoting jaw pads easily hold irregular-shaped objects and protect work pieces. Ideal for gluing models, crafts and various other projects that require instant opening and closing and where fast, easy application to or removal from the work is required. Jaws and handles are glass filled nylon. Spring is heavy-duty tempered steel for maximum strength. Jaw pads are plastic. Available in 3/4, 1, 2, and 3 In. opening capacity and reach.

Kreg   1-in 90 Degree Clamp 350-lb Corner Clamp

The Kreg® 90° corner clamp gives you the helping hand you need to hold 90° corners and “T” joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° corner clamp leaves both of your hands free to add your fasteners. The 90° corner clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology. The 90° corner clamp helps hold assemblies like boxes, cabinets, drawers and cases together to ensure that you get strong, tight-fitting assemblies—whether you’re using Kreg pocket-hole joinery, or another method. The clamp’s V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg screws, or even another type of fastener, such as a nail or wood screw. The 90° corner clamp features all-metal construction, including cast-aluminum pads—an outer "V" and inner wedge—that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases. Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you’re using thin plywood for drawers, or materials up to 1" thick.

Jorgensen   36-in 600-lb Bar Clamp

Our Jorgensen 3736 36 In. medium duty steel bar clamp is our most popular medium duty steel bar clamp. They are used by do it your sellers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types. It is a sliding head design: the sliding head is threaded to accommodate the screw with large easy grip handle and swivel pad. All adjustments are made in the movable sliding head, making this style fast acting, easy to open and close and suitable for close quarters clamping. You can easily move the sliding head up and down the bar. The 3/8 In. steel screw with easy grip handle and 3/4 In. diameter plated steel swivel can be tightened or loosened to meet your exact pressure needs. Our 3736 has a 36 In. opening capacity, a 2-1/2 In. reach and a 600 Lb. load limit. The strong, light weight 1/4 In. x 3/4 In. steel bars are plated to be rust resistant. The multiple-disc-clutch design consist of two hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar. The iron castings have an orange baked enamel finish.

Pony   3-in 50-lb Corner Clamp

Pony 9166 3 In. 90 degree corner clamp is our most popular corner clamp. Fixed at 90 degrees, it clamps miter joints or butt joints, holds work up to 3 In. wide and leaves joints fully exposed for miter correction, doweling, gluing or nailing. Two countersunk holes permit the clamp to be bench top mounted. Four clamps mounted as such provide a rectangular clamping fixture of unlimited size. Frame and sliding jaws are die cast aluminum. Screws are plated, cold-drawn steel with smoothly rolled threads; steel sliding-pin handles.