Orbit Misting Attachments & Accessories

Orbit   Cobra Portable PVC Portable mist stand

The portable Orbit cobra mist stand provides immediate relief from the heat by producing an ultra-fine mist that cools outdoor temperatures by up to 20 degrees Fahrenheit. Simply attach any standard garden hose to the hose adapter and turn on the water. The cobra mist stand is available in green and blue.

Orbit   Stainless Steele Brass Misting nozzle 5 -Pack

The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles

Orbit   Residential PVC Outdoor mist calcium inhibitor filter

Keep your mist cooling system operating at peak performance with the Outdoor Mist Calcium Inhibitor Filter. This filter protects your misting system by preventing solid sediments from clogging your nozzles. It filters out particles as small as 5 microns (smaller than a human hair) and coats smaller particulates with polyphosphates that enable easier passage through nozzles without forming blockages. Recommended for use in conjunction with an auto-drain valve, and annual filter replacement to prolong the life of mist nozzles.

Orbit   Flex Cobra PVC Mist stand

Flexible design allows customized direction and uncountable applications for your mist cooling. The flex cobra has all of the features to make mist cooling easy - it's freestanding, portable and flexible. The versatility of the flex cobra allows for the watering or misting in virtually any position or situation. Designed with all of your misting needs in mind.

Orbit   Mist 1/2-in PVC Split section coupling with mist nozzle 5 -Pack

This 1/2 Inch PVC Split Section with Mist Nozzle is designed to attach two 2-foot sections of PVC pipe together to extend the 1/2 Inch Performance PVC Outdoor Mist Cooling System. Each 1/2-inch section is a slip-by-slip fitting and attaches easily with PVC cement.

Orbit   Hose Faucet to 1/2-in PVC Mist cooling adapter hose faucet

PVC swivel hose adapter is designed for use with 1/2 In. schedule 40 PVC Outdoor Mist Systems or wherever a connection is needed between a standard garden hose thread and PVC pipe. The hose adapter has a slip fitting and requires PVC cement for watertight operation, but is easily applied following the directions given on the PVC cement container.

Orbit   3/8-in PVC Flexible mist nozzle extension

The Orbit sidewinder 1/I4 Inch flexible mist stand with memory tubing is an ultra convenient and portable way to stay cool in the heat of the day. The sidewinder easily changes its shape to fit your needs, and cools the air around you by up to 20 degrees Fahrenheit. It is 30 inches long, with a brass and stainless steel mist nozzle. The sidewinder is available in blue and green. The flexible memory tubing wraps around trees, poles, chairs and umbrellas for versatile mist cooling.

Orbit   Slip Lok Brass Coupling with mist nozzle

The unique Brass Slip Lok Design is applicable in both low and high pressure mist system applications. The Slip Lok Fitting with Mist Nozzle, coupled with 3/8 in. nylon tubing, assembles in minutes with a simple insertion and twist motion to create a mist system up to 125 linear ft. They actually grip tighter as the pressure is increased and can be used with mist pumps that pressurize up to 1000 PSI. The fitting can be rotated a full 360 degrees to direct the mist where needed. It can also be disassembled from the tubing by simply compressing the ferrule against the body and pulling away from the tubing. These features make it the most versatile mist system fitting available.

Orbit   3/8-in Brass and stainless steel Mist hose adapter

This hose Y converts one faucet into two, allowing you to use two hoses from the same faucet. Great for a mist system. Convenient valve controls let you adjust the flow or shut-off each connection. The 3/4" male-threaded connection has a swivel head for easy installation. Heavy-duty metal construction with leak-free ball valve ensures quality performance.

Orbit   4 Inch Brass Flexible mist nozzle extension 5 -Pack

The 4 In. flexible mist nozzle extension can be used in place of a standard mist nozzle. The nozzle extends the mist spray another four inches in the mist line, and the wire memory allows the user to direct the mist wherever needed. This is especially useful on fixed fitting mist systems such the Orbit performance PVC mist cooling system. The extension features a brass and stainless steel mist nozzle that only uses 1/2 gallon per hour per nozzle, making it the most water-efficient nozzle available. Includes: (5) flexible mist nozzle extensions.

Orbit   Outdoor PVC Mist system booster pump

The Orbit Misting Booster Pump increases regular 3/8-inch mist line pressure capacity to 160 psi. This rise in pressure capacity creates a finer mist, thereby enhancing the overall effectiveness of your misting system. The pump mounts easily to any wall, and connects to your water source with simple, built-in Slip-Lok? connections.

Orbit   20' x 3/8 In 3/8-in PVC Mist cooling tubing

The 3/8 In. x 20 Ft. tan mist flexible LDPE tubing is ideal for water supply lines and can be cut to exact lengths for a customized mist system. Coupled with the Professional System Slip Lok Fitting with Mist Nozzle, the 3/8 In. nylon tubing assembles in minutes with a simple insertion and twist motion to create a mist system up to 125 linear Ft. The tubing is UV treated and can be used with systems that run upt to 165 psi.

Orbit   Cool 3/8-in PVC Mist tubing stucco anchor 5 -Pack

The Stucco Installation Kit contains a blue stucco anchor, masonry screw, and a 3/8 In. wrap around clamp used for outdoor mist cooling sytem installation. The kit can be used for installation into stucco, wood, and metal surfaces.

Orbit   Outdoor Brass Misting nozzle plug 3 -Pack

The Brass Nozzle Plug is used in place of a mist nozzle on all outdoor mist cooling systems. These plugs are used to replace nozzles in the off season when the mist system is not used and the mist nozzles are being stored. Nozzle plugs prevent debris and insects from entering the mist line and clogging the system. They are also useful to plug off openings when less mist is desired.

Orbit   Misting 3/8-in PVC Heavy duty mist mounting tubing clamp 5 -Pack

These heavy-duty 3/8 In. tubing clamps are designed for use in hanging 3/8 In. flexible tubing. Each clamp is colored to match the tan nylon tubing in all Orbit/Arizona outdoor8 In. outdoor mist cooling systems. Clamp comes with an inserted nail that is ready to tap into place; simply wrap around the tubing and nail where you need it to go.

Orbit   3/8-in PVC Hose attachment

The timer works just like an egg timer. Twist the dial to the desired watering duration up to 120 minutes and the timer will turn itself off. The mechanical operation requires no batteries and makes this one of the easiest and quickest timers to use. It has a large dial with both timed watering and manual watering options. Timed watering can be set from 15 to 120 minutes. Perfect for misting systems.

Orbit   Slip Lok 3/8-in Brass Mist coupling

The Slip-Lok Coupling is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low and high pressure (up to 160 psi) systems as the coupling grips tighter when the pressure increases. Additionally, the coupling and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing, making the Slip-Lok coupling a versatile mist system fitting.

Orbit   Slip Lok 3/8-in Brass Mist elbow

The Slip-Lok Elbow is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low and high pressure (up to 160 psi) systems as the elbow actually grips tighter when the pressure increases. Additionally, the elbow and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing making the Slip-Lok elbow the most versatile mist system fitting available.

Orbit   Slip Lok 3/8-in Brass Mist hose adapter

The Hose Adapter connects outdoor mist cooling system lines to a standard garden hose for water supply. The unique brass Slip-Lok design can be used with both low and high pressure (up to 160 psi) systems as the adapter actually grips tighter when the pressure increases. Additionally, the adapter and tubing can be disassembled by simply compressing the ferule against the body and pulling away from the tubing making the Slip-Lok adapter a versatile mist system fitting.

Orbit   8-Oz PVC Misting nozzle cleaner

The mist nozzle cleaner is specifically formulated to gently clean mist nozzles clogged with mineral deposits. It is easy to use, biodegradable, and safe on brass, stainless steel, and plastic.