Aluminum Tile edge trim Tile Edge Trim & Accessories

Schluter Systems   Jolly 0.313-in W x 98.5-in L Brushed stainless steel L-angle

Schluter-Jolly is a decorative profile for wall applications. The 90 degree angle creates a clean, flush look on outside wall corners while protecting the tile edges from damage. The integrated joint spacer on both sides of the profile ensures consistent grout joints. Matching corner pieces are available separately to eliminate sharp edges created by miter cuts.

Schluter Systems   Finec 0.5-in W x 98.5-in L Greige textured color-coated aluminum

Finec is a finishing and edge-protection profile for the edges of tile coverings or mosaics. The profile protects the tile edges from mechanical damage and features a very slim, elegant reveal. Finec is ideal for protecting mitered edges, while creating a discreet trim for a minimalist design.

Schluter Systems   Rondec 0.375-in W x 1.0-in L Matte white textured color-coated aluminum Inside corner Trim Accessory

The ID/RO100MBW is a prefabricated corner for Rondec that eliminates the need for a mitered edge. It is used to create 90 degree inside corners. The ID/RO100MBW corner is designed for use with the RO100MBW profile.

Schluter Systems   Jolly 0.5-in W x 98.5-in L Classic grey color-coated aluminum L-angle

Schluter-Jolly is a decorative profile for wall applications. The 90 degree angle creates a clean, flush look on outside wall corners while protecting the tile edges from damage. The integrated joint spacer on both sides of the profile ensures consistent grout joints. Matching corner pieces are available separately to eliminate sharp edges created by miter cuts.

Schluter Systems   Designbase-SL 2.375-in W x 0.5-in L Satin anodized aluminum Inside corner

The ID/DBSL60AE is a prefabricated corner for DESIGNBASE-SL that eliminates the need for a mitered edge. It is used to create 90° inside corners. The corners slide onto the profile during installation. The ID/DBSL60AE corner is designed for use with the DBSL60AE profile.

Schluter Systems   Jolly-P 0.188-in W x 98.5-in L Classic Grey PVC L-angle Tile Edge Trim

The Schluter-Jolly-P profile is designed to finish and protect tile edges on walls and countertops. This profile is ideal for creating decorative transitions on walls. Additional uses include finishing the edge of a tiled backsplash or the edge of a tiled bathtub surround. The integrated joint spacer ensures a uniform grout joint between the tile and profile.

Schluter Systems   Reno-TK 0.375-in W x 98.5-in L Solid Brass Brass Reducer Tile Edge Trim

Reno-TK creates a sloped transition between tile and floor coverings at lower elevations. The 1/4-in channel beneath the sloped flange hides and protects the cut edge of the lower adjoining surface. Reno-TK is typically used between tile and carpet and is compliant with the Americans with Disabilities Act.

Schluter Systems   Dilex-AHK 0.563-in W x 0.5-in L Satin copper anodized aluminum End caps

The E/AHK1S/AK is an end cap for the Dilex-AHK cove-shaped profile. It is used to cover the open edge of the profile in applications where the end is left exposed. The end cap has a leg that fits into the profile and can be used with any size of the Dilex-AHK in satin copper.

Schluter Systems   Dilex-AHK 0.563-in W x 0.5-in L Brushed copper anodized aluminum End caps

The E/AHK1S/AGGB is an end cap for the Dilex-AHK cove-shaped profile. It is used to cover the open edge of the profile in applications where the end is left exposed. The end cap has a leg that fits into the profile and can be used with any size of the Dilex-AHK in brushed copper..

Schluter Systems   Dilex-AHK 0.563-in W x 0.5-in L Beige textured color-coated aluminum End caps

The E/AHK1S/TSB is an end cap for the Dilex-AHK cove-shaped profile. It is used to cover the open edge of the profile in applications where the end is left exposed. The end cap has a leg that fits into the profile and can be used with any size of the Dilex-AHK in beige.