Water-based Waterproofers & Sealers

RainguardPro   Micro-Seal HD Clear, Natural Super flat Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer ( 5-gallon )

RainGuard Pro Micro-Seal HD Silane/Siloxane Water Repellent is a heavy duty, invisible clear, high solids penetrating water repellent that is non-yellowing, low odor, zero VOC, and non-toxic. It is formulated to not be affected by weathering, salt, dirt, freezing temperatures, UV light, and wind-driven rain, among many other damaging elements. It dries down to a clear, invisible finish that does not change the surface texture or color. Ideal for use on uncoated/unpainted, vertical/horizontal, interior/exterior surfaces such as concrete, brick, pavers, wood, porous natural and artificial stone, masonry, unglazed/unpainted porous tile, and color integrated or unpainted stucco. Micro-Seal HD contains twice the solids of the original Micro-Seal water repellent.

Liquid Rubber   Color Sealant Medium Gray Flat Solid Water-based Mildew Resistant Mold Resistant Interior/Exterior Waterproofer ( 5-gallon )

Liquid Rubber Color Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation. Apply when temperature is above 50F/10C. Make sure that the surface is dry and free of anything that would hinder adhesion. Typically cures within 24-48 hours. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hours. Not meant as a constant walking surface. Coverage: Vertical Surfaces - Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq m). It should require around 2-3 heavy coats to achieve a 30 mil (0.76 mm) (DFT) membrane. Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) (DFT) membrane. Apply next coat when dry to touch and nothing is wet underneath; tacky is okay. Generally, 6-8 hours between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove painters tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans. Clean Up: Use soap and water or mineral oil to clean skin.

Cabot   DeckCorrect Sandstone Solid Exterior Wood Stain and Sealer in One ( 5-gallon )

DeckCorrect by Cabot covers and corrects worn, weathered, exterior wood and concrete.

Cabot   DeckCorrect Frontier Solid Exterior Wood Stain and Sealer in One ( 5-gallon )

DeckCorrect by Cabot covers and corrects worn, weathered, exterior wood and concrete.

Cabot   DeckCorrect Canyon Solid Exterior Wood Stain and Sealer in One ( 5-gallon )

DeckCorrect by Cabot covers and corrects worn, weathered, exterior wood and concrete.

Pond Armor   Gray/Gloss Gloss Solid Oil-based Interior/Exterior Waterproofer ( 1.5-quart )

Pond Shield is a non-toxic epoxy liner designed for the pond and water feature industry. It is created for constructed water features or ponds with a more designer, formal or natural look than rubber liners are able to offer with no more unsightly folds or creases. In addition, unlike rubber liners, Pond Shield is available in eight colors - black, clear, competition blue, sky blue, forest green, tan, gray and white. Pond Shield is used for waterproofing structured surfaces found in water features such as koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78° F to 140° F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded surfaces. With a tensile bond strength stronger than the internal strength of the concrete, Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

Cabot   DeckCorrect 2025 Color of the Year Burnt Hickory Solid Exterior Wood Stain and Sealer in One ( 5-gallon )

DeckCorrect by Cabot covers and corrects worn, weathered, exterior wood and concrete.

Liquid Rubber   Color Sealant White Flat Solid Water-based Mildew Resistant Mold Resistant Interior/Exterior Waterproofer ( 1-gallon )

Liquid Rubber Color Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation. Apply when temperature is above 50F/10C. Make sure that the surface is dry and free of anything that would hinder adhesion. Typically cures within 24-48 hours. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hours. Not meant as a constant walking surface. Coverage: Vertical Surfaces - Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq m). It should require around 2-3 heavy coats to achieve a 30 mil (0.76 mm) (DFT) membrane. Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) (DFT) membrane. Apply next coat when dry to touch and nothing is wet underneath; tacky is okay. Generally, 6-8 hours between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove painters tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans. Clean Up: Use soap and water or mineral oil to clean skin.

Rainguard Water Sealers   Stucco Sealer Clear, Natural Super flat Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer ( 1-gallon )

RainGuard Stucco Sealer is a penetrating water repellent that dries down to a clear, invisible finish. It has a non-yellowing, low odor, zero VOC, and non-toxic formula, making it safe for people, pets, and plants. It is formulated to not be affected by weathering, salt, dirt, freezing temperatures, UV light, and wind-driven rain, among many other damaging elements. Stucco Sealer dries down to a clear, invisible finish that does not change the surface texture or color. Ideal for use on uncoated/unpainted, vertical, interior/exterior stucco surfaces such as: stucco walls, fences, garden fences, and any other porous stucco surfaces.

Liquid Rubber   Color Sealant White Flat Solid Water-based Mildew Resistant Mold Resistant Interior/Exterior Waterproofer ( 5-gallon )

Liquid Rubber Color Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation. Apply when temperature is above 50F/10C. Make sure that the surface is dry and free of anything that would hinder adhesion. Typically cures within 24-48 hours. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hours. Not meant as a constant walking surface. Coverage: Vertical Surfaces - Apply a minimum final thickness of 1 gallon per 25 sq ft (2.3 sq m). It should require around 2-3 heavy coats to achieve a 30 mil (0.76 mm) (DFT) membrane. Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) (DFT) membrane. Apply next coat when dry to touch and nothing is wet underneath; tacky is okay. Generally, 6-8 hours between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove painters tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans. Clean Up: Use soap and water or mineral oil to clean skin.

Pond Armor   Forest Green/Gloss Gloss Solid Oil-based Interior/Exterior Waterproofer ( 1.5-quart )

Pond Shield is a non-toxic epoxy liner designed for the pond and water feature industry. It is created for constructed water features or ponds with a more designer, formal or natural look than rubber liners are able to offer with no more unsightly folds or creases. In addition, unlike rubber liners, Pond Shield is available in eight colors - black, clear, competition blue, sky blue, forest green, tan, gray and white. Pond Shield is used for waterproofing structured surfaces found in water features such as koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78° F to 140° F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded surfaces. With a tensile bond strength stronger than the internal strength of the concrete, Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

Pond Armor   Forest Green Gloss Oil-based Interior/Exterior Waterproofer (1.5-Gallon)

Pond Shield is a non-toxic epoxy liner designed for the pond and water feature industry. It is created for constructed water features or ponds with a more designer, formal or natural look than rubber liners are able to offer with no more unsightly folds or creases. In addition, unlike rubber liners, Pond Shield is available in eight colors - black, clear, competition blue, sky blue, forest green, tan, gray and white. Pond Shield is used for waterproofing structured surfaces found in water features such as koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78° F to 140° F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded surfaces. With a tensile bond strength stronger than the internal strength of the concrete, Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

RainguardPro   Micro-Seal Clear, Natural Super Flat Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer (1-Gallon)

RainGuard Pro Micro-Seal Silane Siloxane Water Repellent is an invisible clear penetrating water repellent that is non-yellowing, low odor, zero VOC, and non-toxic. It is formulated to not be affected by weathering, salt, dirt, freezing temperatures, UV light, and wind-driven rain, among many other damaging elements. It dries down to a clear, invisible finish that does not change the surface texture or color. Ideal for use on uncoated/unpainted, vertical/horizontal, interior/exterior surfaces such as: concrete, brick, pavers, wood, porous natural and artificial stone, masonry, unglazed/unpainted porous tile, and color integrated or unpainted stucco.

RainguardPro   Micro-Seal Clear, Natural Super Flat Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer (1-quart)

RainGuard Pro Micro-Seal Silane/Siloxane Water Repellent is an invisible clear penetrating water repellent that is non-yellowing, low odor, zero VOC, and non-toxic. It is formulated to not be affected by weathering, salt, dirt, freezing temperatures, UV light, and wind-driven rain, among many other damaging elements. It dries down to a clear, invisible finish that does not change the surface texture or color. Ideal for use on uncoated/unpainted, vertical/horizontal, interior/exterior surfaces such as: concrete, brick, pavers, wood, porous natural and artificial stone, masonry, unglazed/unpainted porous tile, and color integrated or unpainted stucco.

Pond Armor   White Gloss Oil-based Interior/Exterior Waterproofer (3-Gallon)

Pond Shield is a non-toxic epoxy liner designed for the pond and water feature industry. It is created for constructed water features or ponds with a more designer, formal or natural look than rubber liners are able to offer with no more unsightly folds or creases. In addition, unlike rubber liners, Pond Shield is available in eight colors - black, clear, competition blue, sky blue, forest green, tan, gray and white. Pond Shield is used for waterproofing structured surfaces found in water features such as koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78° F to 140° F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded surfaces. With a tensile bond strength stronger than the internal strength of the concrete, Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

Pond Armor   Gray/Gloss Gloss Solid Oil-based Interior/Exterior Waterproofer ( 3-gallon )

Pond Shield is a non-toxic epoxy liner designed for the pond and water feature industry. It is created for constructed water features or ponds with a more designer, formal or natural look than rubber liners are able to offer with no more unsightly folds or creases. In addition, unlike rubber liners, Pond Shield is available in eight colors - black, clear, competition blue, sky blue, forest green, tan, gray and white. Pond Shield is used for waterproofing structured surfaces found in water features such as koi ponds, pools, fountains, aquariums, salt water tanks, hydroponics, streams, waterfalls, reflecting pools, mini lakes, holding tanks, etc. It is easily applied and easy to maintain, for most applications, a single coat application is all that is needed for proper coverage. In addition, your pond will be virtually maintenance free with a surface that algae can be easily wiped off of and is safe for fish and plants. Pond Shield offers both strength and flexibility in a coating, strength and flexibility that is tested from -78° F to 140° F. Pond Shield is an epoxy pond liner that has been specifically designed to bond to porous or abraded surfaces. With a tensile bond strength stronger than the internal strength of the concrete, Pond Shield epoxy will stick to what you apply it to. Over time, hairline cracks can form in concrete, mortar or grout joints. Being flexible, Pond Shield resists mimic cracking and provides the best protection possible in a coating.

RainguardPro   Clear-Seal 100% Clear/Satin Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer (1-Gallon)

Rainguard Pro Clear-Seal 100% Two-Part Urethane is a urethane coating and Quick Cure additive kit that creates a protective film for painted and unpainted surfaces. This product creates a hard glossy film that is UV resistant, stain resistant, and hot tire resistant. It protects against physical abrasion and spills and can be mixed with RainGuard Pro Slip Resist (sold separately) to help create an anti-slip finish. The Quick Cure additive cuts dry time in half (compared to Clear-Seal 100% Single-Part Urethane) and allows for regular foot traffic just 24 hours after application (See TDS for details). Ideal for use on interior or exterior, horizontal or vertical, painted or unpainted surfaces such as brick, concrete, stone, wood, stucco, EIFS, pavers, and other masonry.

RainguardPro   Plugger 25 Clear, Semi-satin Eggshell Transparent Water-based Mildew Resistant Mold Resistant Interior/Exterior Sealer (1-quart)

RainGuard Pro Plugger 25 Water-based Acrylic Sealer is a clear semi-satin water repellent for vertical and horizontal surfaces that are not exposed to hot tire traffic. It is a non-yellowing, low odor, low VOC, and non-toxic wood and masonry sealer. It is formulated to seal and bind chalky surfaces, and is an excellent top coat for paints and stains. Plugger 10 dries down to a clear semi-satin finish with minimal change to surface texture and color. Ideal for use on vertical/horizontal, painted/unpainted, interior/exterior surfaces such as: concrete, CMU blocks, brick, wood, porous natural and artificial stone, unglazed painted/unpainted tile, masonry, and stucco.