Foundation Armor Concrete Coatings

Foundation Armor   WL550 Matte Wet Look Clear Matte Transparent Concrete Sealer Ready-to-use (5-Gallon)

The WL550 is a penetrating, matte wet look water repellent sealer for unsealed concrete, brick, flagstone, slate, natural stone, and masonry. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will slightly darken the surface to enhance any dull and faded coloring. The WL550 is made from high quality, non-recycled, US manufactured resins. It works entirely below the surface and won’t leave a surface film. By reducing water absorption, damage and deterioration caused by water absorption will also be reduced, such as cracking, pitting, mold, mildew, algae, and staining.

Rust-Oleum   Decorative Color Chips Glacier Gray Interior/Exterior Concrete Additive ( Actual Net Contents: 16-oz )

Rust-Oleum Decorative Chips are designed for use with any one-part or two-part concrete floor coating. When sprinkled onto a freshly coated surface, these decorative chips bond to the wet film to become a permanent part of the coating.

Foundation Armor   AR350 Wet Look Sealer Clear Satin Gloss Solvent-based Satin Ready-to-use Decorative concrete coating ( 5-gallon )

The AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface to enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a low gloss wet look finish.

Eagle   Clear Solvent-based Ready-to-use Concrete sealer ( 5-gallon )

Protect and beautify your concrete with a clear, high gloss, durable acrylic film. Your concrete will look new and be protected from color fading and weather damage. Protects and beautifies all types of concrete; plain, stamped, acid stained, exposed aggregate, and concrete pavers.

Rust-Oleum   Decorative Color Chips Gray Interior/Exterior Concrete Additive ( Actual Net Contents: 16-oz )

Rust-Oleum Decorative Chips are designed for use with any one-part or two-part concrete floor coating. When sprinkled onto a freshly coated surface, these decorative chips bond to the wet film to become a permanent part of the coating.

Foundation Armor   SX5000 WB Silane Siloxane Clear Matte Water-based Matte Ready-to-use Concrete sealer ( 5-gallon )

The Armor SX5000 WB is a clear water-based Silane-Siloxane sealer designed to protect unsealed concrete, brick, pavers, and masonry from damage and deterioration caused by the absorption of surface water. It penetrates into the surface and chemically reacts to form a hydrophobic barrier in the pores that can reduce the absorption of surface water by up to 95%. By reducing the absorption of surface water, damage and deterioration caused by water absorption such as cracking, spalling, freeze-thaw, salt damage, and mold and mildew growth is also reduced. Easily applied with a pump sprayer, the Armor SX5000 WB can last for up to 7-10 years below the surface when properly applied. The Armor SX5000 WB is a great option if you are looking for a high performing water-based sealer that works entirely below the surface and will maintain the natural, unsealed look and feel of the concrete, brick, pavers, stone, or masonry.

Encore Coatings   Cool pool deck coating Cool pool deck coating with free sealer in container Water-based Satin Concentrate Concrete stain ( 5-gallon )

Thousands of pool owners agree: Cool is today’s way to cool pool deck surfaces. As a top-rated paint for pool deck surfaces, Cool resurfaces existing deck toppings like Kool Deck as well as bare concrete. This is not your typical pool deck paint! Cool is a one-of-a-kind pool deck coating from Encore that repairs and resurfaces your concrete pool deck while reducing heat build-up by as much as 38%. When applied over Kool-Deck-type surfaces, Cool keeps them cool. Cool is also easy to apply. Cool is applied with an ordinary paint roller and dries in minutes. Coverage: 400 square feet. Lowe's exclusive includes sealer with every Cool making it the best value anywhere!

Daich   Hi-Build Ultra Clear Acrylic Satin Ready-to-use Concrete sealer ( 1-gallon )

Hi-Build Ultra Clear Coat is a high performance, high solids acrylic clear coat sealer enhanced with urethane. Formulated with double the durability and performance power of many other retail sealers, Hi-Build Ultra offers significantly greater protection per coat from water, salt, dirt, grease, chemicals and foot traffic. It's an excellent choice for all kinds of interior and exterior residential, commercial and light industrial concrete floor surfaces.

Foundation Armor   AR350 Wet Look Sealer Clear Satin Gloss Solvent-based Satin Ready-to-use Decorative concrete coating ( 1-gallon )

The AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface to enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a low gloss wet look finish.

Foundation Armor   WL550 Matte Wet Look Sealer Clear Matte Solvent-based Matte Ready-to-use Concrete sealer ( 1-gallon )

The WL550 is a penetrating, matte wet look water repellent sealer for unsealed concrete, brick, flagstone, slate, natural stone, and porous masonry. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will darken the surface to slightly enhance any dull and faded coloring. The WL550 is made from high quality, non-recycled, US manufactured resins. It works entirely below the surface and won’t leave a surface film. By reducing water absorption, damage and deterioration caused by water absorption will also be reduced, such as cracking, pitting, mold, mildew, algae, and staining.

Eagle   Natural Water-based Ready-to-use Concrete sealer ( 5-gallon )

Eagle Natural Seal is a water-based penetrating water repellent sealer for concrete and masonry while providing a natural look.

Valspar   Concrete Gray Water-based Flat Ready-to-use Concrete stain ( 1-gallon )

Valspar Solid Color Concrete Sealer instantly boosts curb appeal with a rich coat of protective color that stands up to weather, salt and chemicals.

DRYLOK   Natural Look Clear Water-based Matte Ready-to-use Concrete sealer ( 1-gallon )

Just like natural and man-made stone, concrete, stucco and masonry are porous materials that will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. Specially formulated natural look curing membrane and penetrating sealer soaks right in and provides matte protection that looks beautiful and natural. Use on interior and exterior masonry surfaces, including concrete driveways, basement floors, garage floors, concrete sidewalks, patios, terrazzo, brick and slate.

Valspar   Base Water-based Flat Concentrate Concrete stain ( 1-gallon )

Valspar Semi-Transparent Concrete Stain transforms outdoor spaces into a beautiful retreat. Highly versatile to create a natural stone look or beautiful patterns with multiple colors.

Ghostshield   Siloxa-Tek 8500 Penetrating Water and Salt Repellent Water-based Flat Ready-to-use Concrete sealer ( 1-gallon )

Siloxa-Tek 8500 is our favorite concrete sealer to treat nearly any concrete application. A proprietary blend of silane/siloxanes, this clear penetrating concrete sealer not only prevents deicing salt, chloride and freeze-thaw damage, but its hydrophobic nature resists moisture intrusion and vapor transmission. It dries completely clear with a natural finish and will not change the look or appearance of the substrate. This is the go-to-choice to seal any concrete, brick, or masonry surface - especially driveways, basements, patios and garages

Daich   TracSafe Clear Acrylic Satin Ready-to-use Concrete sealer ( 1-gallon )

Now you can add more foot traction and safety to numerous slippery surfaces indoors and out with TracSafe® Anti-Slip Sealer by Daich Coatings. It's a unique pre-mixed formula that's ready to apply wherever you need it. TracSafe® locks firmly onto all kinds of flooring materials, indoors and out. From concrete, patio stones and pavers, to slippery fieldstone, linoleum and even ceramic tile, you can make most slippery surfaces safer in just a day. Treat slippery steps, walkways and wet pool decks, to garage and workshop floors, entrances, shower floors and more. It's also great for business settings, including exterior grounds, steps, entrances and slippery interior floors. Along with its anti-slip benefit, TracSafe® is also a superior high performance sealer. It forms a tough, clear barrier that protects surfaces and helps keep them in ideal condition. Just roll on two coats for a lasting, color enhancing satin sheen and added foot traction that helps protect family, friends and customers.

Encore Coatings   Cool pool deck coating Clear Water-based Satin Concentrate Concrete stain ( 5-gallon )

COOL! is the #1 Pool Deck Coating in America for its ability to reduce surface temperatures, resurface many types of pool deck surfaces, and provide a safe anti-slip finish in any color you desire. For best results, we recommend utilizing the full 3-product system. Save money by purchasing the system in a "bundle" which includes all 3 products.

Valspar   White Interior/Exterior Anti-Skid Concrete Additive ( Actual Net Contents: 3.0-oz )

Valspar® anti-skid additive mixes directly into floor paints, sealers and concrete stains for enhanced traction on steps, ramps, pool decks and more.

Seal-Krete   Turbo Wet Look Clear Solvent-based High-gloss Ready-to-use Concrete sealer (

Seal-Krete 24 oz. Turbo Wet Look High Gloss Concrete Sealer Spray seals and protects concrete and masonry surfaces with a premium high gloss finish. Durable spray sealer creates a protective barrier against water damage, chemicals, UV light and stains to extend the life of the surface. Wet look paver sealer features a turbo spray system for 4X faster application compared to traditional water proofer sprays.

Rust-Oleum   Decorative Color Chips Tan Interior/Exterior Concrete Additive ( Actual Net Contents: 16-oz )

Rust-Oleum Decorative Chips are designed for use with any one-part or two-part concrete floor coating. When sprinkled onto a freshly coated surface, these decorative chips bond to the wet film to become a permanent part of the coating.