Prices, Promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

YOU MAY ALSO LIKE

Fas-n-Tite - 12-in x 0.375-in Spike
Fas-n-Tite12-in x 0.375-in Spike
545
Fas-n-Tite - -Count 10-in x 0.375-in Spike
Fas-n-Tite-Count 10-in x 0.375-in Spike
185
Fas-n-Tite - 12-in x 0.375-in Spike
Fas-n-Tite12-in x 0.375-in Spike
427
Fas-n-Tite - 8-in x 0.375-in Spike
Fas-n-Tite8-in x 0.375-in Spike
197
Fas-n-Tite - -Count 10-in x 0.375-in Spike
Fas-n-Tite-Count 10-in x 0.375-in Spike
408
Fas-n-Tite - 8-in x 0.375-in Spike
Fas-n-Tite8-in x 0.375-in Spike
462
Grip-Rite - 10-lb 6-in x 0.108-in Timber Tie Spike
Grip-Rite10-lb 6-in x 0.108-in Timber Tie Spike
41
Coghlan's - Steel Tent Stakes 12 in x 0.25 in Silver Pack of 50
Coghlan's Steel Tent Stakes 12 in x 0.25 in Silver Pack of 50

Related Searches

Related Products

12-in x 0.375-in Spike

Fas-n-Tite   12-in x 0.375-in Spike

Fas-n-Tite 12 inch galvanized common spikes, or spike nails, are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and flat head. We recommend these nails for exterior use with treated lumber. Large shank and thick head provide strength and durability.

12-in x 0.375-in Spike

Fas-n-Tite   12-in x 0.375-in Spike

Fas-n-Tite 12 inch galvanized common spikes, or spike nails, are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and flat head. We recommend these nails for exterior use with treated lumber. Large shank and thick head provide strength and durability.

-Count 10-in x 0.375-in Spike

Fas-n-Tite   -Count 10-in x 0.375-in Spike

Fas-n-Tite spike nails are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and Flat Head. We recommend these nails for exterior use and with treated lumber. Large shank and thick head provide strength and durability. Recommended for exterior use and with treated lumber. Parts measure 3/8-in wide by 10-in long.

8-in x 0.375-in Spike

Fas-n-Tite   8-in x 0.375-in Spike

Fas-n-Tite spike nails are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and Flat Head. We recommend these nails for exterior use and with treated lumber. Large shank and thick head provide strength and durability. Recommended for exterior use and with treated lumber. Parts measure 3/8-in wide by 10-in long.

8-in x 0.375-in Spike

Fas-n-Tite   8-in x 0.375-in Spike

Fas-n-Tite spike nails are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and Flat Head. We recommend these nails for exterior use and with treated lumber. Large shank and thick head provide strength and durability. Recommended for exterior use and with treated lumber. Parts measure 3/8-in wide by 10-in long.

-Count 10-in x 0.375-in Spike

Fas-n-Tite   -Count 10-in x 0.375-in Spike

Fas-n-Tite spike nails are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and Flat Head. We recommend these nails for exterior use and with treated lumber. Large shank and thick head provide strength and durability. Recommended for exterior use and with treated lumber. Parts measure 3/8-in wide by 10-in long.

10-lb 6-in x 0.108-in Timber Tie Spike

Grip-Rite   10-lb 6-in x 0.108-in Timber Tie Spike

Timber tie nails are used to join heavy landscape timbers together.

8-in x 0.375-in Spike

Fas-n-Tite   8-in x 0.375-in Spike

Fas-n-Tite spike nails are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and Flat Head. We recommend these nails for exterior use and with treated lumber. Large shank and thick head provide strength and durability. Recommended for exterior use and with treated lumber. Parts measure 3/8-in wide by 10-in long.

12-in x 0.375-in Spike

Fas-n-Tite   12-in x 0.375-in Spike

Fas-n-Tite 12 inch galvanized common spikes, or spike nails, are perfect for landscape timbers, railroad ties, and log home construction. These nails are hot-dipped galvanized with a smooth, thick shank and flat head. We recommend these nails for exterior use with treated lumber. Large shank and thick head provide strength and durability.

10-Count 6-in x 0.238-in Spike

Fas-n-Tite   10-Count 6-in x 0.238-in Spike

Pole barn nails offer a best-in-class solution for your construction needs. Pole barn nails are used in interior and exterior post-frame construction where superior holding power is desired. These pole barn nails feature a penny size of 60D, measure 6-in in length, and feature a hot-dipped galvanized finish for unparalleled rust and corrosion resistance. Parts come in a pack of 10. Fas-n-Tite offers reliable, functional products that get the job done right.

10-Count 10-in x 0.375-in Spike

Fas-n-Tite   10-Count 10-in x 0.375-in Spike

Spike nails offer a best-in-class solution for your landscaping needs. Spike nails, or simply spikes, typically measure over 4-in in length and are used in landscaping, log home construction, or any application utilizing thick landscaping timbers or railroad ties. They are also useful when building retaining walls or fences. These spike nails feature a hot-dipped galvanized coating and smooth shank. Parts measure 3/8-in in diameter and 10-in in length. Parts come in a pack of 10. Fas-n-Tite offers reliable, functional products that get the job done right.

30 -lb 6.0-in x 0.25-in Timber tie spike

Grip-Rite   30 -lb 6.0-in x 0.25-in Timber tie spike

For the most comprehensive selection of nails and screws, look for Grip-Rite Fasteners, the most popular brand of fasteners in America. No matter what the project or what size the job, Grip-Rite Fasteners has the optimal fastening solution. There are many sizes and styles of nails and screws available. As construction materials and techniques evolve, fastener design keeps pace with the changing technology. Fastener needs vary from project to project and the safety and life expectancy of the project can be extended or compromised based upon the fastener used. Fasteners have been designed to meet the special needs of projects such as roofing or drywall and in many cases are known by the application for which they are intended (roofing nails, drywall screws, masonry nails, etc.

1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Fas-n-Tite   1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Manufactured for quick and easy installation, electro-galvanized plastic cap roofing nails are ideal for fastening roofing felt, house wrap, sheathing, underlayment, and more. The ringed shank and wide round head on this nail provide superior holding power for reliable installation. Its capped-head helps seal out moisture that can penetrate sidewall, thereby reducing blow-offs and lateral slippage. The electro-galvanized finish on this nail provides superior rust and corrosion protection. Install with confidence as its sharp point easily pierces felt without ripping and the flexible plastic head conforms to surfaces. Because of its wide head and tight hold, fewer nails are needed to get the job done. Use this fastener with a plastic cap roofing nailer.

Outdoor Accents 8-Count 1.469-in Powder-coated Finishing Washer

Simpson Strong-Tie   Outdoor Accents 8-Count 1.469-in Powder-coated Finishing Washer

The Outdoor Accents hex-head washer from Simpson Strong-Tie provides the decorative appearance of a bolt connection. Its patent-pending design enables a much easier installation time compared to through-bolting. The washer is code-listed (IAPMO). It is designed exclusively to fasten Outdoor Accents post bases, T and L straps and angles.

1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Fas-n-Tite   1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Manufactured for quick and easy installation, electro-galvanized plastic cap roofing nails are ideal for fastening roofing felt, house wrap, sheathing, underlayment, and more. The ringed shank and wide round head on this nail provide superior holding power for reliable installation. Its capped-head helps seal out moisture that can penetrate sidewall, thereby reducing blow-offs and lateral slippage. The electro-galvanized finish on this nail provides superior rust and corrosion protection. Install with confidence as its sharp point easily pierces felt without ripping and the flexible plastic head conforms to surfaces. Because of its wide head and tight hold, fewer nails are needed to get the job done. Use this fastener with a plastic cap roofing nailer.

1/4 X 7-1/2 Aluminum/Steel Hook and Hook Turnbuckle

National Hardware   1/4 X 7-1/2 Aluminum/Steel Hook and Hook Turnbuckle

A legacy of longevity, service and sales support. Since 1901, National Hardware has been alongside the edge of American history, carving its own path built on a foundation of pride, pristine craftsmanship and a gentlemen’s agreement to start selling wagons. Today when people use National Hardware products; with each decorative DIY idea to every organizational element in someone’s workshop, there is a constant thread of nostalgia that evokes a sense of tradition, built on a legacy of longevity that people can trust. We look to instill and pass down these values to future generations by reminding them where it all started and helping them craft their own National heritage.

1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

STINGER   1-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

The Stinger 1 in. Nail Pac, 136260, contains 10 rolls of 200 collated plastic caps and 10 coils of 200 nails. NailPac contains 1 in. collated caps and 1 in. nails. Cap nails are a recommended best practice for securing roofing underlayments of felt and house wrap where nails are required. Each plastic cap offers superior holding power to the traditional staple, while also diverting water away from the fastener opening. This means more secure underlayment and extra protection against water damage. The 1 in. NailPac is for use with the Stinger CN100 Cap Nailer only.

1-3/4-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Fas-n-Tite   1-3/4-in 12 -Gauge Electro-Galvanized Plastic Cap Nails

Manufactured for quick and easy installation, electro-galvanized plastic cap roofing nails are ideal for fastening roofing felt, house wrap, sheathing, underlayment, and more. The ringed shank and wide round head on this nail provide superior holding power for reliable installation. Its capped-head helps seal out moisture that can penetrate sidewall, thereby reducing blow-offs and lateral slippage. The electro-galvanized finish on this nail provides superior rust and corrosion protection. Install with confidence as its sharp point easily pierces felt without ripping and the flexible plastic head conforms to surfaces. Because of its wide head and tight hold, fewer nails are needed to get the job done. Use this fastener with a plastic cap roofing nailer.

1/4 X 7-1/2 Aluminum/Steel Hook and Eye Turnbuckle

National Hardware   1/4 X 7-1/2 Aluminum/Steel Hook and Eye Turnbuckle

A legacy of longevity, service and sales support. Since 1901, National Hardware has been alongside the edge of American history, carving its own path built on a foundation of pride, pristine craftsmanship and a gentlemen’s agreement to start selling wagons. Today when people use National Hardware products; with each decorative DIY idea to every organizational element in someone’s workshop, there is a constant thread of nostalgia that evokes a sense of tradition, built on a legacy of longevity that people can trust. We look to instill and pass down these values to future generations by reminding them where it all started and helping them craft their own National heritage.

Secure Timber With Spike Nails

Spike nails are typically longer and thicker than common household nails. The size and holding power of these metal fasteners make them useful for railroad ties and log homes. For the do-it-yourselfer, use them to anchor landscaping projects, such as timber edging.


Lowe’s carries a variety of spike nails as well as an abundant supply of hardware fasteners. We have smooth shank nails as well as spiral and ring shank options for the extra hold needed in projects like pole barn construction. Choose commonly used 10-inch nails or lengths from 6 inches to 12 inches, depending on the thickness of your timber and the nature of your project. Use 12-inch nails for heavy construction. We also have an assortment of nailhead sizes and shank diameters.


Many of our spike nails are hot-dipped galvanized to prevent corrosion and rust. We also carry spikes specifically for securing landscape timber. These timber tie spikes are thinner to minimize splitting and are approved for use in treated lumber. Package quantities can range from 10 nails to a bucket of over 400.