Spacer Spacers & Machine Bushings

Hillman   Machine Bushing 1-3/8 In. X 2-1/8 In. 14 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Hillman   Machine Bushing 1 In. X 1-1/2 In. 14 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Hillman   1/4-in x 3/8-in Bronze Sleeve Bearings

Sleeve bearings provide a housing for a shaft or fastener to pass through and give the joint greater strength. Sleeve bearings allow for free movement of machine parts. They are used in many different machines, such as automobiles, home appliances, and office systems.

Hillman   Machine Bushing 3/4 In. X 1-1/4 In. 18 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Hillman   Machine Bushing 1-1/4 In. X 1-7/8 In. 18 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Hillman   Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1/4in Length)

These zinc-plated steel bushings are sized 5/16" Inner diameter x 5/8" Outer diameter x 1/4" Length

Hillman   Tigger Spacer 1/2 x 1 x 2-1/2

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.

Hillman   Tigger Spacer 1/4 x 5/8 x 1

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.

Hillman   Large Solid Shaft Collar (1/8In Inner Dia x 3/8In Outer Dia)

These shaft collars measure 1/8" in inner diameter and 3/8" in outer diameter

Hillman   Zinc-plated Shaft Collar (1/4in Inner Dia. X 1/2in Outer Dia. X 9/32in Thick)

These shaft collars measure 1/4" in inner diameter, 1/2" in outer diameter, and 9/32" in thickness

Hillman   Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1in Length)

These zinc-plated steel bushings are sized 5/16" Inner diameter x 5/8" Outer diameter x 1" Length

Hillman   Zinc-plated Shaft Collar (1/2in Inner Dia. X 1in Outer Dia. X 7/16in Thick)

These shaft collars measure 1/2" in inner diameter, 1" in outer diameter, and 7/16" in thickness

Hillman   Tigger Spacer 1/4 x 5/8 x 1/4

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.