Prices, Promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

Related Searches

Related Products

Machine Bushing 1-3/8 In. X 2-1/8 In. 14 Gauge

Hillman   Machine Bushing 1-3/8 In. X 2-1/8 In. 14 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Machine Bushing 1 In. X 1-1/2 In. 14 Gauge

Hillman   Machine Bushing 1 In. X 1-1/2 In. 14 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

1/4-in x 3/8-in Bronze Sleeve Bearings

Hillman   1/4-in x 3/8-in Bronze Sleeve Bearings

Sleeve bearings provide a housing for a shaft or fastener to pass through and give the joint greater strength. Sleeve bearings allow for free movement of machine parts. They are used in many different machines, such as automobiles, home appliances, and office systems.

Machine Bushing 3/4 In. X 1-1/4 In. 18 Gauge

Hillman   Machine Bushing 3/4 In. X 1-1/4 In. 18 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Machine Bushing 1-1/4 In. X 1-7/8 In. 18 Gauge

Hillman   Machine Bushing 1-1/4 In. X 1-7/8 In. 18 Gauge

Machine bushings are specially designed washers used for quick, accurate spacing on shafts. They reduce wear between moving parts and prevent marring of finishes. Machine bushings can also be used for accurate spacing on any type of rod or shaft.

Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1/4in Length)

Hillman   Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1/4in Length)

These zinc-plated steel bushings are sized 5/16" Inner diameter x 5/8" Outer diameter x 1/4" Length

Tigger Spacer 1/2 x 1 x 2-1/2

Hillman   Tigger Spacer 1/2 x 1 x 2-1/2

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.

Tigger Spacer 1/4 x 5/8 x 1

Hillman   Tigger Spacer 1/4 x 5/8 x 1

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.

Large Solid Shaft Collar (1/8In Inner Dia x 3/8In Outer Dia)

Hillman   Large Solid Shaft Collar (1/8In Inner Dia x 3/8In Outer Dia)

These shaft collars measure 1/8" in inner diameter and 3/8" in outer diameter

Zinc-plated Shaft Collar (1/4in Inner Dia. X 1/2in Outer Dia. X 9/32in Thick)

Hillman   Zinc-plated Shaft Collar (1/4in Inner Dia. X 1/2in Outer Dia. X 9/32in Thick)

These shaft collars measure 1/4" in inner diameter, 1/2" in outer diameter, and 9/32" in thickness

Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1in Length)

Hillman   Zinc-plated Steel Bushings (5/16in Inner Dia. X 5/8in Outer Dia. X 1in Length)

These zinc-plated steel bushings are sized 5/16" Inner diameter x 5/8" Outer diameter x 1" Length

Zinc-plated Shaft Collar (1/2in Inner Dia. X 1in Outer Dia. X 7/16in Thick)

Hillman   Zinc-plated Shaft Collar (1/2in Inner Dia. X 1in Outer Dia. X 7/16in Thick)

These shaft collars measure 1/2" in inner diameter, 1" in outer diameter, and 7/16" in thickness

Tigger Spacer 1/4 x 5/8 x 1/4

Hillman   Tigger Spacer 1/4 x 5/8 x 1/4

Bushings can be used to take up space between to two pieces of material. They can also be used to reduce the size of fastener needed to go through a larger hole.

Keep Distance Between Fasteners With Spacers

Add a bit of distance between fastened parts with spacers. Similar to washers, spacers are fastened to bolts before bolts are installed into holes, causing the bolt head to stick out noticeably more. This can serve multiple purposes, from making the bolt easier to remove by hand or with a tool, to adding stability to the connection.


Nylon spacers serve the additional purpose of making fasteners nonconductive. These spacers feel soft like plastic and are most ideal in electronic circuitry where the application needs a form of insulation. Metal spacers, such as steel, are more commonly used for their durability and come with added non-ferrous and non-corrosive traits.


There are various fasteners to help you install what you need for security and other benefits, whether you want to use a power tool or hand tool to install them. Check out our comprehensive list of fastener hardware in our guide — Choose The Best Bolts, Nuts and Washers for Your Project.