WAL-BOARD TOOLS Drywall Clips

SHEETROCK Brand   6 -Pack 1.25-in Steel Drywall Clips

USG Sheetrock® Brand Drywall Repair Clips allow you to fix holes and water damaged areas in drywall partitions while maintaining building firecode ratings. Versatile clips can be used with both 1/2" and 5/8" drywall panels. Package contains enough clips and screws to fix large holes.

ToolPro   Pan and Tape Holder 14-in Drywall Tape Reel

The mud pan and tape holder is the perfect tool for finishing drywall. It frees up both your hands so you can focus on the work at hand. Holds a 12 in. mud pan and a 500 ft. roll of joint tape right at your hip by hooking to your belt.

Simpson Strong-Tie   2.25-in Steel Drywall Clips

Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine Simpson Strong-Tie connectors. The DS drywall stop eliminates costly blocking at top plate, end walls, and corners. A typical residence will use several hundred of these inexpensive clips with a substantial savings in blocking and labor.

Marshalltown   Adjustable Squeegee Trowel with DuraSoft Blade 2.5-in x 22-in Rubber Knockdown Knife

The MARSHALLTOWN Adjustable Squeegee Trowels uses a DuraSoft® blade molded to a high impact backing that ensures consistent finishes and long life. Perfect for knockdown drywall finish and can even be used as a trowel to skim coat walls. You can adjust the pitch 35° in either direction for ceilings and tight corners. The threaded handle can be used with extension handles for ceilings. The Adjustable Squeegee Trowel comes with a threaded DuraSoft® handle with a metal ferrule and hanging hole.. This product is Made in the USA with Global Materials.

Marshalltown   12-in x 12-in with Rubber Handle

The MARSHALLTOWN Aluminum Hawk holds drywall or plaster while using your trowel or taping knife to apply material to the wall. This Premium Hawk is made of heavy gauge aluminum and the machine face helps keep your material from sliding. The DuraSoft® handle design allows you to rest your hawk on scaffolding posts when not in use. The handle is comfortable and a sponge callous preventor is included to give the best protection to your hands. The hawk edges are smooth and has rounded corners. MARSHALLTOWN Hawks bring quality and reliability to every job. This product is Made in the USA with Global Materials.

Marshalltown   Drywall Taper and Banjo Taper 23-in Drywall Tape Reel

Apply drywall tape quickly and easily with the MARSHALLTOWN SeamSlammer™ drywall taper. This SeamSlammer™ holds a 500' roll of tape, has a wood handle, and an adjustable strap. Never worry about applying too much or too little mud on the drywall tape with the thumbscrew flow adjustment feature. The bulkhead separates the tape from the mud, keeping the roll dry. This product creates less mess and a speedy taping finish for your drywall projects.

Marshalltown   Diameter 16-in Drywall Circle Cutter

Whether you need to make an opening for a light fixture or a pipe, you will create a sharp, clean cut with the MARSHALLTOWN Drywall Circle Cutters. This features a hardened cutter wheel and center pin that will remain sharp indefinitely. Measurements come easy and accurate with the calibrated steel shaft. The heat-treated scoring blade can cut circles up to 16" (406 mm) in diameter, easily and accurately.

QLT by Marshalltown   12-in x 12-in with Plastic Handle

The QLT by MARSHALLTOWN Aluminum Hawk holds drywall or plaster while using your trowel or taping knife to apply material to the wall. This hawk is made of heavy gauge aluminum and the machine face helps keep your material from sliding. The strong lightweight high-impact black plastic handle is hollow to rest on scaffolding posts when not in use. The hawk edges have been smoothed and the corners are rounded for convenience.

ToolPro   18 in. Knockdown Knife 18-in x 18-in Plastic Knockdown Knife

The 18 in. knockdown knife with clear lean blade is used to flatten wall and ceiling texture patterns for that "knocked down" look. It erases trowel lines without creating chatter marks like other knives. The blade is both flexible and durable.

Marshalltown   Adjustable Squeegee Trowel with DuraSoft Blade 2.5-in x 18-in Rubber Knockdown Knife

The MARSHALLTOWN Adjustable Squeegee Trowels uses a DuraSoft® blade molded to a high impact backing that ensures consistent finishes and long life. Perfect for knockdown drywall finish and can even be used as a trowel to skim coat walls. You can adjust the pitch 35° in either direction for ceilings and tight corners. The threaded handle can be used with extension handles for ceilings. The Adjustable Squeegee Trowel comes with a threaded DuraSoft® handle with a metal ferrule and hanging hole.. This product is Made in the USA with Global Materials.

ToolPro   24 in. Knockdown Knife 24-in x 24-in Plastic Knockdown Knife

The 24 in. knockdown knife with clear blade is used to flatten wall and ceiling texture patterns for that "knocked down" look. It erases trowel lines without creating chatter marks like other knives. The blade is both flexible and durable.

ToolPro   12 in Knockdown Knife 12-in x 12-in Plastic Knockdown Knife

The 12 in knockdown knife with clear lean blade is used to flatten wall and ceiling texture patterns for that knocked down look. It erases trowel lines without creating chatter marks like other knives. The blade is both flexible and durable.

Marshalltown   3.75-in x 3.75-in with Rubber Handle

MARSHALLTOWN Callus Preventer Replacement Part for used to protect your hand when using drywall hawks.

QLT by Marshalltown   Drywall Mud Pan and Tape Holder 12-in Drywall Tape Reel

The QLT by MARSHALLTOWN Mud Pan and Tape Holder hooks to your belt and holds the mud pan in an easily accessed position to give you free hands. It can conveniently hold a 12" mud pan and up to a 500' roll of drywall tape. Get this 12" product to make your drywall work an easier process.

Jonard Tools   Jonard Tools Plastic Electrical Outlet Cutout

Designed specifically for cutting out single and double gang non-metallic old work boxes, this wall template level is perfect for ensuring the boxes are level every time.