10-Foot-Long Struts

Allied Tube & Conduit   10-ft 12 -Gauge Electro-galvanized Slotted channel Strut

12 gauge strut channel.

Allied Tube & Conduit   10-ft 14 -Gauge Electro-galvanized Half slot channel Strut

14 Gauge strut channel.

Adamax   2-ft 14 -Gauge Electro-galvanized Half slot channel Strut

Our NEWHOUSE ELECTRIC 13/16 in. 14 Gauge Metal Strut Channel is a standard half-slot metal U-bracket for supporting and framing light-weight structural loads on your construction site. You can use it for a variety of applications, including pipe, conduit, ceiling grids, racks, duct and cable tray supports, trapeze supports, seismic bracing and other general framing uses. Labor and materials are at a premium on any building site. Our strut channels are designed to help you get the maximum number of framing and support applications with the minimum amount of labor and pieces. Our channel struts have smooth surfaces, free from steel scales. They have an electro-galvanized zinc finish that helps reinforce strength and resist corrosion. All of our fittings meet or exceed physical properties of ASTM A1011 GR 33 for elasticity, plasticity, stiffness, aging sensitivity, strength, hardness, impact toughness, fatigue strength and fracture toughness. You can reinforce nearly any light load structure with the firm assurance that your properly measured and fitted steel U-channels will hold better than expected. Our strut brackets also UL-Listed and come with a 2-year warranty.

Allied Tube & Conduit   10-ft 12 -Gauge Electro-galvanized Slotted channel Strut

12 gauge strut channel.

Allied Tube & Conduit   Strut 3/8-in Threaded Rod 10-ft

3/8-In threaded rod 10-FT.

Allied Tube & Conduit   Strut 1/4-in Threaded Rod 10-ft

1/4" threaded rod 10-FT

Allied Tube & Conduit   Strut 1/2-in Threaded Rod 10-ft

1/2" threaded rod 10-FT

Adamax   3/8-in Straight Strut Nut

Our Strut Channel Spring Nut uses a spring to slide and secure the nut, so you don't need an extra hand to hold it in place. You can work faster while you're busy tightening down parts and other fastener hardware. It works exceedingly well with struts and other fixtures. It's also a secure way of holding fixtures in place when working with 1-5/8-inch channels. Our advanced hardware innovations bring you strut channel nuts that are highly resistant to pull-out and sideslip in excess of the full strength of the channels with which they are used. The unique design develops a wedging action that increases with pressure or load. You get reliable fittings that support the structural integrity of your channel setup. Our threaded hardware is electro-galvanized for excellent corrosion resistance. You get reliable anti-rust protection even in areas exposed to weather. You also get superior paint based on your hardware nuts. Together, these features allow your spring nuts to cut down on your work time while maintaining solid installation and safe, load-bearing construction. Save valuable hours on assembly and retrofit applications while adjusting fittings to precise distances. Our electrical hardware can be used with A-series and C-series steel channels in conjunction with hex head cap screws to create a unique, weldless fastening solution. All our threaded products are American Standard thread, free fit class 2, and are UL-certified with a 2-year warranty.

Adamax   1/2-in Angled Strut Bracket

Application:Used to hold channel. Electrical strut type:Bracket. Strut Accessory Size:1/2-in. Style:Angled. Finish:Electro-galvanized

Adamax   3-in Angled Strut Bracket

Get the right accessories to mount and support your electrical construction tools. Our 3-in. Steel Angled Single Channel Strut Mounting Bracket is a steel square post base connector designed for fastening 1-5/8-in. B Series standard struts to any stable surface. You can use them as single channel brackets for any steel, aluminum or fiberglass struts to provide a solid fixed point of installation for your metal framing applications. You can use it for a variety of applications, including pipe, conduit, ceiling grids, racks, duct and cable tray supports, trapeze supports, seismic bracing, and other general framing uses. Smart professionals know to prevent potential injury and damage to conduits by securing strut ends with the appropriate brackets. Each base connector is fashioned from durable steel and features 4 holes for stable attachment and 6 holes in the bracket for versatile single-channel mounting. You can attach them to the end of a strut channel with ease, creating a hardy base point to absorb structural stresses. They have a electro-galvanized finish that helps resist corrosion, which is especially useful in wet environments. Get durable added protection that enables your structure to stand snugly in position for a much longer duration. All of our fittings meet or exceed physical properties of ASTM A1011 GR 33 for elasticity, plasticity, stiffness, aging sensitivity, strength, hardness, impact toughness, fatigue strength and fracture toughness.

Adamax   1/4-in Straight Strut Beam clamp

Secure your electrical and structural support systems, engineered for dependable performance in a wide range of installation environments. Designed for straightforward, reliable attachment to beams and strut channels, this clamp provides a strong holding solution for rod applications and electrical support hardware.

Adamax   1/4-in Spring Strut Nut

Our Strut Channel Spring Nut uses a spring to slide and secure the nut, so you don't need an extra hand to hold it in place. You can work faster while you're busy tightening down parts and other fastener hardware. It works exceedingly well with struts and other fixtures. It's also a secure way of holding fixtures in place when working with 1-5/8-inch channels. Our advanced hardware innovations bring you strut channel nuts that are highly resistant to pull-out and sideslip in excess of the full strength of the channels with which they are used. The unique design develops a wedging action that increases with pressure or load. You get reliable fittings that support the structural integrity of your channel setup. Our threaded hardware is electro-galvanized for excellent corrosion resistance. You get reliable anti-rust protection even in areas exposed to weather. You also get superior paint based on your hardware nuts. Together, these features allow your spring nuts to cut down on your work time while maintaining solid installation and safe, load-bearing construction. Save valuable hours on assembly and retrofit applications while adjusting fittings to precise distances. Our electrical hardware can be used with A-series and C-series steel channels in conjunction with hex head cap screws to create a unique, weldless fastening solution. All our threaded products are American Standard thread, free fit class 2, and are UL-certified with a 2-year warranty.

Adamax   2-in Universal Strut Pipe strap

Application:Used with Rigid/IMC, EMT conduit and pipe. Electrical strut type:Pipe strap. Strut Accessory Size:2-in. Style:Universal. Finish:Electro-galvanized

Adamax   1/4-in Cone Strut Nut

Our Nylon Strut Cone Nuts use a pliable nylon cone that secures the nut in place through the entire range of construction site temperatures. It works very well with struts and other fixtures. It also saves you the trouble of getting multiple types of spring nuts for 1-5/8-inch channels. Our advanced hardware innovations bring you strut channel cone nuts that are highly resistant to pull-out and side-slip in. The unique design develops a wedging action that increases with pressure or load. You get reliable fittings that support the structural integrity of your channel setup. Our threaded hardware is electro-galvanized for excellent corrosion resistance. You get reliable anti-rust protection even in areas exposed to weather. You also get superior paint based on your cone strut nuts. Together, these features allow your nylon cone nuts to cut down on your work time while maintaining solid installation and safe, load-bearing construction. Save valuable hours on assembly and retrofit applications while adjusting fittings to precise distances. Our channel cone nuts help you eliminate the inventory and installation hassles of conventional spring nuts. You can use these with A, C, E, and H-series channels and inserts. These high-quality fittings are manufactured from Q235 Steel and then electro-galvanized. All of our threaded products are American Standard thread with a 2-year warranty.