Steel Range Hood Parts
132 results
4.6
- •For 3.25-in x 10-in duct
- •Built-in back draft Damper and bird screen
- •Steel baked black enamel finish
3.4
- •Replaces BP19 & S97012248
- •120V, .62 Amp; TP6080-018
- •Includes motor, bracket and fan blade, used for ductless range hood
4.8
- •Keep the kitchen looking new with this splash plate
- •Backsplash in reversible black or white
- •Splash plate provides easy clean up of cooking splatter
5.0
- •Designed for range hood venting and wall-mounted installations
- •Energy-efficient, air-tight construction helps reduce heat loss
- •Weighted backdraft damper prevents back-draft and minimizes heat loss
4.7
- •Easy 5 minute install: no wiring, no drywall cutting, and minimal tools
- •Up to 60% Quieter on low speed: noise-free operation
- •Up to 2X More Power on high speed: keeps kitchen air fresh and clean
5.0
- •Fits the PM390SSP and PM250SSP power packs
- •Hemmed edges for an attractive look
- •Protects the base of custom hoods
- •Fits the PM390SSP and PM250SSP power packs
- •Hemmed edges for an attractive look
- •Protects the base of custom hoods
- •7 in Duct Compatible
- •Galvanized Steel
- •Foam Sealed Damper
4.3
- •Charcoal filters used to freshen air and recirculate it back into the kitchen
- •Dimensions of each filter: 10-1/2-inch x 8-3/4-inch x 1/2-inch
5.0
- •Charcoal Filters are used to remove odors when range hoods are set to recirculate air back into the kitchen
- •Replace your range hood charcoal filter every 6 months to improve air circulation and remove odors
- •Each filter measures: 11-1/2-inch x 17-3/8-inch x 7/16-inch
1.6
- •Replacement range hood grease filter
- •Filters and traps grease
- •For use with select GE range hoods
5.0
- •The cabinet spacer kit is designed for 30-in hoods that are installed in 15-in deep cabinets instead of the traditional 12-in deep cabinets
- •This kit pushes the hood out where it should sit relative to the cabinet
- •For use with GE under-counter 30-in range hoods
- •Exact Replacement for Nutone® Range Hood Ventilators and others
- •Includes FB460 fan blade
- •UL® Listed
- •3 1/4 x 10 in Rectangular Duct Compatible
- •Galvanized Steel
- •Built in Damper
- •The cabinet spacer kit is designed for 36-in hoods that are installed in 15-in deep cabinets instead of traditional 12-in deep cabinets
- •This kit pushes the hood out where it should sit relative to the cabinet
- •For use with GE 36-in under-counter range hoods
4.5
- •7 in Duct Compatible
- •Low-Profile Design
- •For use with Zephyr Hurricane and Typhoon Range Hoods (AK2100CB, AK2100CS, AK2100CW, AK2136CB, AK2136CS, AK2136CW, AK2142CS, AK2148CS, AK2500CB, AK2500CS, AK2500CW, AK2536CB, AK2536CS, AK2536CW, AK7100BS290-BF, AK7100BS-BF, AK7136BS290-BF, AK7136BS-BF, AK9128BS, AK9134BS, AK9528AS, AK9534AS, AK9540AS, AK9546AS)
5.0
- •Compatible with down draft models HDD80052UC and HDD86052UC
- •Custom-Crafted Compatibility – Specifically made for Bosch downdraft systems, this transition ensures hassle-free installation
- •Flexible Vent Configuration – Rotate the discharge direction to left, right, or rear depending on your kitchen layout—ideal for cabinetry with restricted blower space
- •Exact Replacement for Nutone® Range Hood Ventilators and others
- •Includes FB460 fan blade
- •UL® Listed
- •Reduces or Increases Duct Size
- •Transition from 8 in to 7 in
- •Galvanized Steel
- •Includes fan blades - FB402 & FB550.
- •Sleeve design
- •UL® Recognized
3.0
- •For Use with Zephyr Siena Pro Wall Model Range Hoods (ZSP-E36BS, ZSP-E42AS, ZSP-E42BS, ZSP-E48AS, ZSP-E48BS)
- •Extension kit replaces standard duct covers
- •Includes taller upper and lower duct covers
