Campbell Hausfeld Air Compressor Accessories

Primefit   8 Piece Push To Connect Air Drop Outlet Kit

Air push to connect outlet drop kit with outlet block ,1/4" brass quick connect coupler, shut off valve and other mounting accessories to create an air outlet drop in your push to connect air system.

DEWALT   Dewalt 3/8 In. Npt Air Regulator with Pressure-Gauge

The DEWALT air regulator with pressure gauge 3/8 in. NPT DXCM019-0343 is part of the line of DEWALT genuine replacement parts. The pressure air regulator allows the user to adjust the air compressor pressure depending on the air tool being used. The DEWALT pressure air regulator with gauge lets the correct amount of air pressure come through the hose to the air tool for maximum tool performance. The body of the air regulator is resistant to corrosion for long-lasting use.

Black Bull   12 Volt Air Compressor Portable Air Pump 150

The Black Bull 12-Volt air compressor portable tie pump is ideal to have on hand for emergencies and while traveling. This 150 psi electric air pump is fully automatic, and is powered by your cars battery. Great to use while camping for inflating bike tires, air mattresses, basketballs, and water rafts. Packaged inside a nylon carry bag, the automatic tire pump is easy to store in the trunk or RV, and to transport in and out of the back of the SUV. The 12-Volt portable inflater pump is easy to use. Just use the alligator clips to attach to your car battery, then attach to tire or inflatable using the air hose.

Metabo HPT   10-Gallon Portable Electric 175 PSI Horizontal Air Compressor

The UA3810AB 10-Gallon ASME Certified Reserve Air Tank is the perfect addition to the jobsite to ensure the air pressure being supplied to all nailers is sufficient, and that the required PSI remains constant - even if the compressor is 200 or more feet away. Simply add this reserve air tank between the compressor and nailers and there will be enough pressure to power five or more nailers operating at the same time. In the event that a nailer requires less PSI than other nailers attached, the UA3810AB has that situation covered with its standard factory installed large knob regulator.

Primefit   3/8 Inch Aluminum Desiccant Dryer Filter with Starter Desiccant

D3802 desiccant dryer and oil remover remove dirt particles, moisture, and oil out of the air. It features a rustproof heavy-duty aluminum housing that can withstand rough industrial and warehouse environments. Also comes with a starter desiccant.

DEWALT   10-Piece Adhesive Window Protector Replacements for Abrasive Blast Cabinet

These replacement window adhesive films are designed for the DEWALT Abrasive Blast Cabinet. This item helps keep the window clear longer for better visibility. Once the film is no longer clear, simply tear off and replace it with another one.

Milton   High Flow Speed Control Exhaust Muffler, 1/2” MNPT - 40 Micron Sintered Bronze Silencer/Diffuse Air and Noise Reducer - Box of 10

Milton 1/2" MNPT speed control exhaust muffler provides unlimited capability of controlling air flow at safe and reduced sound levels on exhaust ports of air valves. Complete operating safety. 40 micron, sintered bronze sleeve is held securely and protected via integrated shroud. 7/8"" hex shape. These units offer a combination of small size and greatest possible sound deadening qualities to reduce exhaust noise to acceptable levels within OSHA noise requirements.

Bostitch   1/4-in x 50-ft PROHOZE

The Bostitch® PRO-1450 is a light-weight, flexible, feature-packed 1/4 In. x 50 Ft. air hose. Made for the job site, the PRO-1450 is constructed from rugged reinforced polyurethane and is abrasion, puncture and chemical resistant. Hot or cold the PRO-1450 works and stays flexible down to -40°F! The ribbed design prevents the hose from sticking to itself or other obstacles on the job-site. The reusable fitting and available repair kits make field repair a snap.

DEWALT   4 Piece 7mm Replacement Nozzle Vac Gun designed for the Abrasive Blast Vac

This Replacement 4-piece Nozzle Vac Gun is used on the DEWALT Abrasive Blast Vac. Their durable ceramic construction provides strong wear resistance and high efficiency.

DEWALT   6-Piece 6-mm and 7-mm Nozzles for Abrasive Blast Cabinet

This Replacement 6-piece Nozzle Gun is used on the DEWALT Abrasive Blast Cabinet. The nozzle guns are used for surface sandblasting. Their durable ceramic construction provides strong wear resistance and high efficiency.

Milton   Speed Control Exhaust Muffler, 1/4” MNPT - 40 Micron Sintered Bronze Silencer/Diffuse Air and Noise Reducer - Box of 25

This 1/4-in MNPT speed control exhaust mufflers by Milton Industries provides air flow control on exhaust tips, exhaust pipes, and exhaust systems for safe and reduced sound levels. A pneumatic tool offering speed control, this air tool provides effective sound deadening for OSHA compliance. The 40 micron filter and sintered bronze sleeve are held securely and protected via an integrated shroud. A combination air diffuser and exhaust silencer, this muffler is the sound deadening system you need.