WEN 12 -Amp 7-1/4-in Plunge/Track saw

Make sure to set your blade depth, and all is lock

Plenty of adjustments,all plastic ,could use some metal in it

Bargain track saw!

Most inexpensive track saw available. I picked up the Wen saw, track, and clamps. I’m impressed with the quality of the track. The saw is good - I’ll probably replace the blade at some point. The clamps do the job but seem expensive for what they are. Overall happy with all three!

Not too bad but not great.

It gets the job done. It is my first track saw so I went cheap to see if they are even for me. Very useful for breaking large pieces of plywood down into manageble cuts. Once in manageble sizes, I much prefer the table saw for quick and repeatable cuts. Also, dust collection is aweful even with a dust extractor but I can live with that for now.

Depends on what you want

If you are looking for an economical option for a track saw, this will suffice, but the track that accompanies the saw is not straight. Mine had a curve in it that was about an 1/8" out of line in it that I did not realize until after I had cut down a door. I have several more doors to install, so may have to bite the bullet and spend the money to get a Dewalt.

Very acurate clean cuts.

Very accurate clean cuts, after adjusting the resistance guides at the base of the saw, it is very stable. I needed to cut 1.5 inch thick butcher block for new counter tops and after following the directions, letting the saw get up to full speed, it sliced through the wood in one pass. After a couple cuts using a vacuum, there was still a lot of sawdust. I used clear packing tape and covered the blade access hole and the sawdust in the air and on the saw was virtually gone. It's really nice to f...

Plunge/Track Saw Circular Saw

This saw exceeded my expectations! The power is incredible, and the plunge feature allows for precise cuts with minimal effort. The track system makes it easy to get straight, clean lines, and it handles different types of wood smoothly. I’ve used it on plywood, MDF, and even hardwood without any issues. Highly recommend for serious DIYers and professionals alike!

Inexpensive track saw

I have made a couple of cuts and really like it very much. Wish I had this years ago. Will mainly use this to cut sheet goods to break it down for my table saw.

Not for heavy use. Not recommended for tradepeople

Motor is very weak when plunging and cutting 3/4in solid wood at 46deg. It struggles quite a bit. A lot of play on the blade. Also, majority of stops built on the saw are made from cheap plastic. Not sure how long this thing will last. However, if you’re a homeowner and are doing super small projects, maybe this saw is for you. But for the cheap price of this saw, you’ll be a cheap product

Kinda heavy but you get use to it after awhile

Love this tool. Should have bought sooner great features and very accurate so far