VEVOR 270 -AMP 120 and 230 -Volt Plasma Cutter
Item #5710989 |
Model #DLZ50A110220V95JLV5
We'll notify you once this item is back in stock.
Plasma cutting machines can cut different thicknesses at different voltages
IGBT inverter will greatly improve the performance of plasma cutting machines
Use harmless compressed air to cut aluminum, stainless steel, mild steel, copper and other metals
Outstanding Cutting Capacity: Are you ready to cut like never before? The plasma cutter can cut different thicknesses under different voltages; It delivers a consistent and precise current to cutting surfaces; Cut 1/2" thick metal like soft butter; Ideal Clean Cut: 1/2"(12 mm); Maximum Severance Cut: 5/8"(16 mm);
All Safety No Heat: The unique air channel design increases the heat dissipation of the power device; The IGBT inverter will greatly improve the performance of the plasma cutting machine; The outstanding 30%@104 °F, 50A; 60%@104 °F, 33A; 100%@104 °F, 25A duty cycle can also ensure long-time cutting;
50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals; Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services; You'll be prepared to take on any challenge!
Sharper than Sharp: The gastight air filter regulator allows you to quickly connect to your air compressor; It can lower or maintain air pressure to reach effective cutting; And you can cut through rough, painted, and rusty surfaces while producing minimal slag without any air leakage;
More than You Expected: The extra long 16' plasma torch and 6.56' ground clamp with cable offers maximum convenience by extending your working area; Quit wasting time searching for an extension cord and adapter; The kit also includes an air regulator, air hose, 4 hose clamps, 2 cable racks, and some consumables;
Specification: Model: VV-PC-CUT50; Arc Striking: Contact; Input Voltage: AC110/220V±10%; Output Current: 110V: 20-40A; 220V: 20-50A; Ideal Clean Cut: 1/2"/12 mm; Maximum Severance Cut: 5/8"/16 mm; Cutting Material: Aluminum, Stainless Steel, Mild Steel, Copper; Power Factor: 0.8; Efficiency: 0.86; Insulation Grade: F; Open Circuit Losses: 220V 14W; 110V 56W; Operating Air Pressure: Less than 0.5MPa; Access Air Pressure: Less than 0.8Mpa; Enclosure Protection Level: IP21S; Item Weight: 22lb/9.98 kg; Item Size: 14.2" x 5.9" x 11.8"/36 x 15 x 30 cm
Dimensions | |||
|---|---|---|---|
Depth (Inches) | 20.4 | Torch Cable Assembly Length | 16 feet |
Ground Cable Length | 6 feet | Weight (lbs.) | 21.7 |
Height (Inches) | 15 | Width (Inches) | 12.2 |
Maximum Cutting Thickness | 5/8-in | Amperage | 270 |
Features | |||
|---|---|---|---|
Air Compressor Included | No | Cuts Steel | Yes |
Air Pressure Maximum (PSI) | 100 | Cutting Speed (Inches Per Minute) | 15 |
Air Pressure Minimum (PSI) | 60 | Input AC Voltage | 120 and 230 |
Cuts Aluminum | Yes | Kit | Yes |
Cuts Brass | Yes | Primary Circuit Breaker | No |
Cuts Cast Iron | Yes | Process | Plasma cutting |
Cuts Copper | Yes | Thermal Overload Protection | Yes |
Cuts Stainless Steel | Yes | Work Clamp Included | Yes |
Warranty | |||
|---|---|---|---|
Warranty | 1-year | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | Safety Listing | Not safety listed |
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 23271400 | ||
Check out the Best Selling Plasma Cutters on Lowes.com
Ratings may include incentivized customer reviews.
Great Plasma Cutter
Very impressed with this plasma cutter. For the price, you cant beat it. I purchased the non-touch version which is best for my current use cases. Its pretty small and light if you need to move around without a cart. Cuts cleanly and has had no problems so far. Came with a 240v->120v adapter for places 240v isnt available as well.
From 250 -AMP 120 and 230 -Volt Plasma Cutter Verified PurchaserIncentivized
Better than expected.
[Employee of lowes] I own a Razor Cut 45 for my plasma table but needed something small that was compact and portable. So I purchased this and crossed my fingers. It arrived today, took 10 min to hook up- I used a standard air fitting for the input so I could use my quick disconnect. And all I can say is wow- successfully cut through 1/4" mild steel like butter, not nearly as temperamental is the Razorcut. Comes with a few extra consumables, I am very pleased.
Keeps tripping the breaker watch what you buy
Junk
air fittings suck i used my own
it does what i bought it for 1/4” and lighter matl, does a nice job.
Lord
Great machine have enjoyed using it for my projects. I recommend the machine to friends. Great for hobbist.
From VEVOR
5 Questions
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Dear customer,we sincerely apologize for any inconvenience caused and will do our best to address your concern. Please contact our professional after...