Tapcon 4 -Piece 3-1/16-in x 4-1/2-in Carbide Masonry Drill Bit Set For Hammer drill
Item #167183 |
Model #11250
Designed for fastening into solid concrete, brick or hollow block
Engineered to seamlessly work with Tapcon concrete screw anchors ensuring an accurate fit
Carbide tip increases strength and durability allowing for repeated use
Tight bit tolerance provides maximum anchor performance
Manufactured with higher tolerances than ANSI standards
An accurate fit so anchors install quick and last long
Precise holes in order to achieve maximum holding power
Increased drive and holding power when used with Tapcon anchors
Less breakage on the job
General | |||
|---|---|---|---|
Type | Percussion | Case Type | N/A (no case) |
Material | Carbide | Package Quantity | 4 |
Tip Material | Carbide | Shank Type | Round |
Dimensions | |||
|---|---|---|---|
Maximum Drilling Depth | 4-1/2-in | Bit Length | 4-1/2-in |
Bit Diameter (Inches) | 3/16-in | Shank Size | 5/32-in |
Features | |||
|---|---|---|---|
Set/Individual | Set | ||
Compatibility | |||
|---|---|---|---|
For Use on Brick | Yes | Brand/Model Compatibility | Tapcon |
For Use on Tile | No | For Use on Wood | No |
For Use on Concrete | Yes | For Use on Rebar | No |
Compatible Tool | Hammer drill | For Use on Stone | No |
Warranty | |||
|---|---|---|---|
Warranty | None | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27111500 | ||
Check out the Best Selling Masonry Drill Bits on Lowes.com
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these masonry drill bits for cutting through concrete, brick, and cinderblock with ease, particularly when paired with a hammer drill. Most report strong durability and value, with many completing six or more holes per bit and successfully installing Tapcon screws. The carbide-tipped design earns consistent praise for reliability and affordability. However, a notable minority experience premature dulling or failure after just one or two holes, creating inconsistency in longevity. Despite this divide, most customers consider them effective and worthwhile for masonry applications.
Customer review summary generated by AI, including incentivized reviews.Doesn't work!
Every time I need to do this kind of work I relearn the stupidity of this product. The drill bit shank is sized appropriately for a 3/16 screw. The tip on the end of the bit is the same size as the screw so the hole is always bigger than the screw and the screw strips out. Dumb!
From 5_SLASH_32-in x 4-1_SLASH_2-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Durability
This item holds up very well for the durability I need it for.
From 3-1_SLASH_16-in x 3-1_SLASH_2-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Hi there, thanks for sharing your positive experience with our Drill Bit. We work hard to make sure our products are well designed. We’d love to have...
15 Questions
4
Answers
4
Answers
3
Answers
2
Answers
2
Answers
2
Answers
1
Answer
1
Answer
1
Answer
1
Answer
Hi there, thank you for sharing your feedback. We are sorry to hear that your experience with our Drill Bits did not match your expectations and did ...