SurfaceMaxx 4500-PSI 1/4-in Soap shooter nozzle for Pressure Washers

Great to get to 2nd floor

Does what it promises. Gets to the top of the second floor. Perfect for washing your siding with using the same nozzle for spraying the soap on and to rinse it off after. Solid product. Made of one piece of milled stainless steel. Just make sure to use some teflon tape when putting the nozzle and nipple together. (Nipple is separate purchase).

Not very much pressure

I tried to use on my 2 story home but there is no pressure behind it. It did reach the second story but was not able to remove the mold on the eve of the house. I could see using it to rinse items off like car or fresh mud but other than that it was not what i expected.

Powerful soap shooter nozzle does the job!

The nozzle fit my pressure washer perfectly. Stainless steel and excellent quality. Able to reach my gutters and many areas of my home. A perfect nozzle that performs.

Nozzle for power washer

I hope to use this to power wash my solar panels. They are quite dirty from pollen. Hopefully this will let me do it without getting on the roof. I will also try washing the siding without having to us my ladder.

Eliminates use of a ladder

Using a Simpson 3200 psi pressure washer, you can reach up to 3 stories with the soap shooter 50 size nozzle. It allows for a lot of solution to be applied to my siding. Easy to assemble, just Teflon tape the threads and tighten.

Not t recommended

I used the Surface Max soap shooter nozzle to put soap on the eaves of my house, with high hopes of not having to bring out the ladder to clean. The wand propelled soap barely 2 stories high but, did not come close to 3 stories, as the description indicates. There was a large span of soap spray but, didn’t have enough pressure at that height, even though a 3300 psi pressure washer was used, to effectively clean the eaves. I also attached the Maxx sprayer to a 1800 psi pressure washer and could...

Power washer soap sprayer nozzle

Nice soap nozzle for my power washer/sprayer. It helps get the soap where you need it for extra cleaning power. It is a great combination to use with my power washer.

Good weight. Sprays soap to 20’

Well made nozzle that sprays easily to 20’. Not quite the pressure I was hoping for but perfect for spraying soap solution. The nozzle has two flats to tighten the nozzle. The flats had a very sharp edge from machining - I had to file it off. The addition of a connector was appreciated.

Great add for my pressure washer

While this works great, it works best with a higher powered pressure washer. It needs at least 1600 psi. Any less, and it does not have the power. Otherwise, it works great!

Nice!

Nice nozzle! Looks differently than a typical foam nozzle that probably came with your pressure washer. The design is a longer barrel to stir or mix the detergent for better coverage. All metal barrel with a typical standard “connection” that will work with most any pressure washer with industry standard connections. Use teflon tape to attach nozzle with connection device and hook it up to your pressure washer. Follow the procedures of your particular pressure washer to use foam. Easy to us...