Schluter Systems Rondec-Step 0.375-in W x 98.5-in L Brushed copper anodized aluminum Step

Make sure trim is fully supported underneath

I think this is a great product for stairs and transitioning between 2 different materials, tile on the horizontal (Landings and Treads) and what ever you want at vertical risers I transitioned from a slate tile landing to oak tread and risers

Nice product

Nice finishing detail to a tile counter top cuts easy with metal cutting blade on a chop saw

Good quality and cost effective

High quality aluminum trim for a unique shower situation. Covering the edge between finished tile and unfinished drywall. Has a nice anodized finish that looks like it will hold up for years to come. My only gripe is I wish they came in longer pieces so one continuous piece could be used instead of multiples.

Perfect for edge of counter top

Perfect for what I used it for. I used it on the edge of a kitchen counter top with tile

Stair Step edge for vinyl planking

The edging worked perfectly for steps with 8mm thick vinyl planks. I routed the edge of the steps the thickness of the flange and drilled and countersunk holes for #4 flathead screws every six inches. I used a 12" diameter saw for thin aluminum with 120 teeth to cut the edging. Factory edges were used next to inside and outside corners.

Great solution

I love it!

Best on the Market

Schluter has always put out a quality product and their tile edging is the best on the market.