Prime-Line 1-3/4-in W x 10-7/8-in H Polished Door Reinforcer Reinforcing plate

ADDED SECURITY – Prevent forced entry by reinforcing the weak spot of your door with the non-recessed door lock reinforcer; use to reinforce and repair both metal, fiberglass and wood doors

BUILT TO LAST – Made of solid brass, the door lock reinforcement plate comes in a brass finish to fit over two bore holes 2-1/8 inch on your door

EASY INSTALLATION – All the necessary mounting hardware is included with the lock reinforcement plate for a quick and easy installation; the door reinforcer plate is pre-punched for mounting, remove the protective film after installation

DIMENSIONS – The door lock reinforcement plate is designed for 1-3/4 inch thick doors only that have a 2-1/8 inch bore hole through the door, 5-1/2 inch on center hole spacing, with a 2-3/8 inch backset from the edge of the door to the center of the bore holes

NOTE – Make sure to dry fit the 3-7/8 inch wide by 10-7/8 inch tall with a 0.03 inch thickness door lock reinforcer before permanently installing and refer to the line art drawing and compare with your needs before purchasing