Kobalt 10 -Amp 7-in -Blade Wet Sliding Table Tile Saw with Stand

Worked perfect

I bought this for a kitchen floor and backsplash. Floor tile was 12x24. This cut flawlessly. The laser was dead on and very helpful. I used it again for a shower enclosure consisting of 8x24 tiles and 12x24 porcelain floor tiles. It worked great. The bathroom is 9 feet by 12 feet. I would highly recommend this saw. Assembly was very easy and breakdown and storage was a breeze.

Gets the job done with little concern

If you are looking for table saw that will get you project done quickly will little room for error this is the saw for you. Pros: Mostly made out of metal One of the cheapest saw with a bed that moves Plunge cuts with a plunge stopper for depth Once you get used to the speed and alignment cutting is a breeze. Cons: Bed has a small shift in it, make sure you know where to push for a straight cut Blade provide is not great for porcelain tile, if you are cutting porcelain get a better blade. htt...

Not the best wet saw

I purchased this new wet saw as I needed one that would rip 24” 1/2 thick travertine tile. My old saw was too small. The instructions for assembly are not well written but can figure it out ok. However, cutting the tile and holding the tile firmly so it doesn’t move, the cut was 1/4” off at the end of the 24” cut. Everything was assembled correctly. Attribute the off line cut due to over heating the blade due to poor water supply for cooling. When I cut extremely slow, the cut was still of...

Wet Tile saw junk

Bought kws-s72-06 wet tile saw. I used it for 1 bathroom job where it worked fine The second time i tried to use it the motor sparked and smoked. Owners manual said to check motor brushes and replace if necessary. Motor brushes are not listed as parts available. Contacted customer service. After 5 weeks of useless responses they finally confessed the motor brushes are no longer available. 1 JOB and saw is finished? This product is junk and customer NO service is useless. DON'T BUY KOBALT!!!!!!!

not worth

I used it only once, and that's it. It broke.

Why rent when you can buy.

This saw did the trick. I laid a back splash using tile sheets and this worked fantastic. Never bogged or had any issues. The back spray was no issue at all. Used it right next to new painted walls on accident not thinking I could have sprayed out the back of the saw. The tray stopped that from happening. The cost was only slightly more than if I had to rent a saw for a week. So much nicer than dealing with rentals.

Junk

It absolutely can not cut a straight line. There is no adjustment to square it. Spend the extra $150 and get a better saw I'd you want your project to come out squared and tru.

Spend your money elsewhere

This thing won't cut square if my life depended on it. Spent close to half a work day making adjustments and making test cuts and no luck. It cuts 1/8" off square in just 12 inches. Now I've wasted half a day; a box of tile; and still don't have an accurate saw. I would have actually come out ahead if I had just bought the yellow one the first time.

Great Cuts

Easy to assemble, very smooth operation, laser is useful good buy for the money.