This concession window turns a blank trailer wall into a service counter, opening a 36 x 36 in gap that drops straight into a matching 36 x 36 in cutout. The glazing is 4 mm PMMA acrylic rather than ordinary glass, so it takes the bumps of a food cart rolling past, the high heat coming off a griddle, and the oily smoke that clouds a shift without cracking or hazing. Two hydraulic rods carry the panel up to an 85 degree opening angle and hold it there, leaving a clear view across the counter, and the awning door overhead keeps heavy rain and direct sun off both the server and the order. An integrated handle and lock pull the window tight against the frame, which matters during transport and while a trailer sits parked overnight. The frame itself is thick aluminum alloy with galvanized components and a baked-on paint finish, and the finished window measures 37 x 37 x 3 in and weighs 21.13 lb. Precise dimensions make it straightforward to fabricate, install, or dismantle, and the same unit works for ice cream shops, coffee shops, dessert shops, and food festivals.
Wide 36 in Serving Opening: The concession window frames a 36 x 36 in serving gap and drops into a matching 36 x 36 in cutout on a trailer wall
Impact-Resistant PMMA Acrylic: A 4 mm PMMA acrylic panel outlasts ordinary glass against food cart bumps, high heat, and the oily smoke of a busy shift
Integrated Handle and Lock: The handle and lock pull the food truck window tight to the frame, keeping the counter closed during transport and parking
Built for Mobile Vendors: One window serves ice cream shops, coffee shops, dessert shops, and food festivals from a trailer or concession stand
Thick Aluminum Alloy Frame: Galvanized components and a baked-on paint finish protect the aluminum alloy frame through seasons of outdoor service
Fabricate Install or Dismantle: Precise 36 x 36 in dimensions let the serving window be cut in, mounted, or taken back out without reworking the wall
Two Hydraulic Rods at 85 Degrees: A pair of hydraulic rods lifts the panel to an 85 degree angle and holds it open for a clear view over the counter
Awning Door and Drag Hook: The awning door and drag hook shed heavy rain and block direct sun, and the rainwater-resistant window weighs 21.13 lb
Specification: Overall Dimensions: 943x943x80 mm / 37x37x3 inch; Installation Dimension: 915x915 mm / 36x36 inch; Net Weight: 9.6 kg / 21.13 lbs; Max Opening Angle: Up to 85 Degrees; Water Resistance: Rainwater Resistant; Surface Treatment: Galvanized
