GIVIMO 72-in x 72-in Shower Pan Kit with Sloped EPS Base 2-in PVC Center Flange and 4-in Stainless Steel Drain Grate

1.26-in Sloped Base: The 72-in by 72-in expanded polystyrene tray arrives pre-pitched to the center drain, so no mortar bed screeding is needed.

HDPE Waterproof Membrane: A high-density membrane over the board with double-layer adhesive forms the waterproof plane that sits under your tile.

XPS Perimeter Curb: The extruded polystyrene curb resists crushing and deformation and ties into the same membrane system at the inside corners.

2-in PVC Center Flange: The center flange takes a 2-in PVC drain line and stays rigid enough to hold alignment while mortar and tile go down.

304 Stainless Steel Grate: The 4-in grate handles foot traffic and standing weight while passing shower water quickly to the trap below.

Trims to Size: Both the base and the curb cut with a blade, so this 72-in kit reduces to fit a smaller alcove without buying new material.

Complete Accessory Pack: Inside and outside corner pieces, waterproof strip, and a stainless serrated trowel come with the 21.38-lb kit.