Bosch Impact Tough 1/4-in x 2-1/2-in Torx Impact Driver Bit 3 -Piece

Not for dewalt tools

I bought these to use on a dewalt impact drills, these bits go in but after using they never come out, i now have two drills with these bits permanatly stuck.

It beats any crosstip

I only had to use one bit both ends (could of stayed with the one side), 13 steps, 2 stringers, support boards and all of the rail support hangers. The heads still look new, a big plus for me.

last longer than any other brand I've used. Made to survive on the job

Used for two days hanging tin roof and siding. Went through only one end before wearing thin.

Bosch 3-Piece 2-1/2-in T25 Torx Alloy Steel Hex Sh

Functional but after building 1 deck using a 1/4" drill driver noticed that the shaft was slightly bent. Co-workers using the Dewalt version didn't seem to experience the issue.

Best Torx ever

I used these with a DeWalt impact tool. I had stripped several other bits trying to remove some 3 inch deck screws from pine 2x6's. These bits removed a pound or more of these screws with no damage to the bit. They show almost no signs of wear despite the amount of time some screws took to finally loosen. I would buy these again, but with their durability it may be a while.