Bosch Glide 10-in 15-Amp Dual Bevel Sliding Compound Corded Miter Saw
Item #5249579 |
Model #CM10GD
Articulated hinge arms – reduce the saw’s front-to-back footprint by up to 10 In compared to slide saws with similar capacities
Axial-Glide System – offers more durable precision than side saw rail systems
Powerful 15 Amp motor – delivers 4,800 no-load RPM for professional cutting capacity
This item is no longer sold on Lowes.com
Articulated hinge arms – reduce the saw’s front-to-back footprint by up to 10 In compared to slide saws with similar capacities
Axial-Glide System – offers more durable precision than side saw rail systems
Powerful 15 Amp motor – delivers 4,800 no-load RPM for professional cutting capacity
Wide cutting capacities – includes 12 In horizontal cut capacity, 5-1/2 In vertical baseboard cut capacity against the fence and a 6 In crown cut capacity nested against the fence (45° spring)
Bevel lock lever and range selector – are located upfront for quick, easy settings without having to reach around behind saw
Tall sliding 4-1/4 In fences – for easy bevel set ups and increased crown and base molding capacity
Wide 47° left/47° right bevel capacity – with detents at 0°, 33.9°, 45° left/right for easy setting of the most-common bevel angles
Adjustable miter detents – designed to be accurate and durable, and includes detents at 0°, 15°, 31.6°, 22.5°, 45°, 60°
Push-button miter detent override – provides easy-to-access thumb actuated control right up front for fine miter angle adjustment
General | |||
|---|---|---|---|
Sub-Brand | Glide | ||
Dimensions | |||
|---|---|---|---|
Arbor Diameter | 5/8-in | Length (Inches) | 32.0000 |
Bevel Capacity (Degrees) | 47 | Saw Blade Diameter | 10-in |
Depth of Cut at 45 Degrees (Inches) | 12.0000 | Tool Weight (lbs.) | 64.0000 |
Depth of Cut at 90 Degrees (Inches) | 8.0000 | Width (Inches) | 26.5000 |
Height (Inches) | 20.5000 | ||
Features | |||
|---|---|---|---|
Amperage (Amps) | 15 | Maximum Miter Cut - Right (Degrees) | 60.0000 |
Bevel | Dual | Maximum Speed (RPM) | 4800.0000 |
Blade Included | No | Miter Stop | Yes |
Compound | Yes | Number of Teeth | 60 |
Cordless | No | Power Rating (HP) | 0.0000 |
Dust Handling | Port | Quick Release Vise | No |
Electric Brake | Yes | Slide | Yes |
Folding | No | Spindle Lock | Yes |
Laser Guide | No | Worm Drive | No |
Maximum Miter Cut - Left (Degrees) | 52 | ||
Warranty | |||
|---|---|---|---|
Warranty | 1-year limited | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | Safety Listing | UL safety listing |
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27112700 | ||
Ratings may include incentivized customer reviews.
What Customers Are Saying
The saw offers excellent cutting performance and precision, with an axial glide system that allows for closer placement to walls. However, it is heavy and has issues with dust collection and alignment/bevel accuracy that require adjustments. Overall, the saw is well-suited for professional and serious DIY use, despite these drawbacks.
Customer review summary generated by AI, including incentivized reviews.Overrated
Don't trust the reviews that say this thing is small, lightweight, or easy to transport. It is bigger than my double bevel 12 inch sliding miter saw and weighs more too. I bought this to bring to the job site based on other reviews making false claims about how compact it is. There are already quality control issues out of the box. There are areas that don't seem to have been finish milled and areas where there is no finish, just raw metal.
From boschtools.com
Great saw
It was time to retire the old 10" delta side kick. I have the 12" slide saw for field work, being this new 10" is my shop saw it will work great. Was pretty good out of the box with minor adjustments, only real thing is it is heavy but will be ok a sit is mounted to the bench now.
Verified Purchaser
Dust collection
The rubber flap should be lower to collect the saw dust. I have had my saw for a couple years, shortly after I purchased it I put some duct tape to extend the rubber flap and then removed the bag and place a vacuum hose to it…. Works great
From boschtools.com
A Great Mitre Saw!
I’ve had this saw for almost a year after using my entry-level no-name saw for a few years. Absolutely love the mechanism and the ability to have it close to the back wall. It’s heavy but I have it bolted to a bench so I won’t be carrying anywhere soon. Everything about this screams quality and I love the feel of all the controls except for the depth of cut stop adjustment. It is the most unrefined, primitive method I could imagine and if basically useless. I have a table saw and routers so I. A...
From boschtools.com
Exceptionally nice saw
We purchased this saw and put it into service in a commercial luthier shop (custom guitar building business). We've seen a few reviews that mentioned setup accuracy issues from the manufacturer however ours was dead on accurate right out of the box and we suspect that those issues might be related to shipping handling after purchase. In the luthier trade we live and die by the thousandth of an inch accuracy for our end products and we've been exceptionally happy with this saw. We purchased it sp...
From boschtools.com
Good, Not Great
I had a problem with blade run-out that was caused by a defective flange washer that rests behind the blade on the arbor. I didn’t bother with Bosch warranty support because the part was inexpensive. I also had a problem with the upper sliding fence components tilting out of square when tightening the thumb screw that locks them in place. I called Bosch warranty support and the person I talked to was very helpful. They sent all four upper and lower fence components, but the upper left fence ...
From boschtools.com
Great Design, Poor Execution
When I first saw this saw I had to have it. When I first played with the glide system at a wood show I had to have it. When I finally saved up enough money to buy it I got it. For the last year I've been fighting with it to get it to cut accurately. Today I read some reviews about the arbor not being aligned with the glide mechanism. I went out and tested my saw and found this to be the problem that has been plaguing me. I was able to get my blade perpendicular to the fence but that doesn't...
From boschtools.com
We are sorry to hear about the issue you are having with your miter saw. Thank you for bringing this issue to our attention. Please contact our Produc...
Poor Dust Collection!
I purchased this saw last Saturday and I've played with it for about 4 days now. So far it's very accurate and operated very smoothly. The 2 things I'm extremely disappointed with is the weight of the saw and dust collection is non-existent. Very little saw dust goes into the bag and when you finish making cuts the dust that collects in the dust port empties back on the work surface. I hope there is a solution for this problem, I've had both a DeWalt and a Hitachi saw that were considerably bett...
From boschtools.com
Thank you for posting your review with regard to Bosch CM10GD. For optimal dust collection we would recommend that you use a dust collector which will...
Best compound saw ever made!
I have been a cabinet installer for 26 years and have purchased a few slide compound miter saws over the years. I recently purchased this saw for my job and i absolutely love it. Being a kitchen installer puts me on a different job site every week and all the other carpenters working on sight come over to see this new Bosch innovation. All of them stop using they're saws and ask to use mine (no b.s.). every one of them are amazed by how incredible easy and precise the saw works. I have already c...
From boschtools.com
Nice Saw
I teach Cabinetmaking at a high school in Virginia and use this saw a lot over the last few years but with teaching students to line up their cuts, a laser would be very beneficial. I installed an aftermarket laser but it runs on a watch battery that did not last very long, it would have been much better if Bosch designed it with a laser. The other negative is the high pitched noise which necessitates ear protection, something that should be worn anyway. On the positive side, the extension arm a...
From boschtools.com
2 Questions
1
Answer
1
Answer




















Hello! Thank you for your review and feedback. We are sorry our CM10GD not meeting your expectations. We would like to hear more about the quality iss...