Bosch 80-in L X 1/2-in W X 6 TPI Carbon Fits most Band Saws Blade

These blades are smooth cutting on thick wood

These are excellent Band Saw Blades. They last along time.

Band saw blade

Am using this blade on my Craftsman band saw. When I first put it on and adjusted it, it cut like butter and very straight. After a few cuts I had to adjust the tension. I've had to do that several more times. But it makes a nice clean cut and works well for the money.

Better than good for the money

Good blades for the price. Others rate this blade compared to a $27.00 blade that isn’t much better. If you force ANY blade into the rear roller, it wont be long before it is ruined. Bandsaw set up is where most problems like binding and bogging come from. Be patient, set up your guide properly, and feed slowly, and these blades will last for years for the average person. You might not be that impressed with costly blades and a poorly set up bandsaw.

Check your product for tampering before leaving .

one of the blades was not an 80" it was a 65" so it will not work. It looked like a return item.

Frustrating

The first one I got broke at the weld within minutes of use. Lowes replaced it with no questions. I am re-sawing lumber to get dimensional pieces I need. I really thought it was my saw motor that didn't have the power because I couldn't get through a cut without the motor bogging down. Blade was also binding on almost every cut. Found the Olson brand to be far superior and can re-saw at speeds expected. No bogging down and a straighter cut as well. Id be happy if Lowes switched manufacturers, th...

Great bandsaw blade

Blade cut through 2” thick hardwood effortlessly. I cut a radius in four legs and one complete circle in a hardwood similar to teak with no apparent dulling of the blade.

Poor Quality Control

I am a seasoned woodworker and I maintain a selection of blades for my two bandsaws. This blade is for my Craftsman saw and I acquired it to cross cut some pine boards. It failed to cut properly on the first board, heated up and scorched the blade. I installed a used blade to finish my project. I though Bosch would be a good quality general purpose blade for soft wood. I was wrong. You would be better off with any other brand and I have tried many.

Poor cutting

I installed this blade on my bandsaw and wished I had not wasted my time and money. After trying to resaw about 5 2x4s, I removed the blade and trashed it because just would not cut without pushing way to hard. I rip 2x4s all the time and don't have this problem. I tried a second bosh blade with same results. Changing brands.

80" 6tpi

This is a horrible blade. I tried to cut through 1/2 inch pine and had to push fairly hard, too hard for what the blade should have been able to cut. I gave it a 2 because it did in fact cut.

Lowes prices beat Harbor Freight

This is good quality for a good price.