By utilizing the simple slide on from the side design and closing door technology electric service mast flashings, or any other hard to access roof jack flashing, can be replaced easily. Use the retro-Spin roof flashing during scheduled roof repair maintenance or as part of an entire re-roof project. A Retro-Spin flashing is a tightly fitted interior and exterior impact extruded galvanized roof flashing. Retro-Spin flashings are impact extruded from 24-gauge galvanized steel and have no soldered seams, ugly zippers nor can any parts be damaged by ultraviolet sun exposure. Spin flashings have a conical shape that is 3 in. tall complemented by a normal sized 4 in. horizontal flange or skirt. The base width dimension is about 15 in. in diameter. The Retro-Spin flashing is installed into a roof system using standard National Roofing Contractor Association (N.R.C.A.), and all other roofing materials manufacturers, typical installation specifications for pipe flashings. This includes shingle fashion placement and nail attachment into a roofing system. The patented design permits the interior flashing to rotate freely within the confines of the exterior flashing. Pre-punched access slots, through the side, create a door that is closed when the flashing is rotated 180°. A galvanized steel Retro-Spin Flashings can be primed and painted to match any roof color. Unequivocally, the easiest to install, and best looking retro-fit replacement flashing on the market. Do-It-Yourselves and Pros who have pride in their work always use the best; A Retro-Spin Flashing.
Retro-Spin galvanized metal flashings rotate 180° to an open-door position, slide around electric mast roof penetrations, and are spin closed then nailed into place, no seams, and no ugly zippers
Retro-fit design place new metal roof flashings around fixed structures, an electric service mast conduit pipe is a good example
Unskilled labor can replace old roof flashings a tin snip, a hammer, and a few nails, installs like any standard roof flashing
Decrepit sun damaged and leaking plastic caulk-less flashings are replaced by cutting the old one off and sliding on a new Retro-Spin flashing replacement
