Welcome to Lowe's
Find a Store

Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.

DIY Haunted House Mirror

Brought to you by Lowe's Creative Ideas

This easy-to-make funhouse mirror guarantees double takes at any haunted house or Halloween party.

Spooky Fun House Mirror

Project Overview

Skill Level


Estimated Time

A few hours

Estimated Cost


Tools and Materials


  • Tape measure
  • Hammer
  • Drill and 1-1/64-inch drill bit


  • 1 sheet 28x30-inch Plexiglas (#11230) 
  • Privacy mirrored window film 3x15-feet (#88148)
  • Window film application kit (#72745)
  • 1 (1"x4"x10') top choice white board (#941)
  • 1/2 pint flat black enamel paint (#43777)
  • 2 pieces pine lattice(1/3"x1.25"x8') (#5996) 
  • 1 box #16x1-inch brads (#128124)
  • 1 box #8x1-1/2-inch Flathead Phillips Wood Screws (#57234)
  • 1 (4 ounce) Titebond Wood Glue (#218256)

Items may be Special Order in some stores. Product costs, availability, and item numbers may vary online or by market. Paint colors may vary slightly from those shown. Availability varies by market for lumber species and sizes.

Missing anything? Shop Online

Project Resources


Mirror, mirror on the wall, who is the scariest one of all?  Build this spooky funhouse mirror and let the reflective fun begin!  A slight bend inward slims and lengthens your reflection. A slight bend outward adds width and heft.

Step 1

spooky mirror project illustration

Cut the 1"x4"x10' board to create one 1"x4"x61" section and one 1"x4"x59" section (or ask a Lowe's Associate to cut it).

Step 2

From the 1"x4"x61" section, cut 2 boards (B) to 30-1/8 inches. From the 1"x4"x59" section, cut 2 boards (A) to 28-5/8 inches.

Step 3

Using wood glue and #8 wood screws, butt joint the boards so that the 28-5/8-inch boards (A) overlap the ends of the 30-1/8-inch boards (B).

Step 4

Cut 2 pieces of lattice to 31-5/8 inches (C). Using wood glue and 1-inch brads attach the lattice pieces horizontally to the front edge of both of the 30-1/8-inch boards (B).

Step 5

Cut 2 pieces of lattice to 28-5/8 inches (D). Using wood glue and 1-inch brads attach the lattice pieces vertically to the back edge of both of the 28-5/8-inch boards (A).

Step 6

Paint the entire wooden frame black. Let dry.

Step 7

Follow directions included with the window film and application kit and carefully apply the window film to the Plexiglas sheet.

Step 8

Carefully bend the Plexiglas sheet and insert it between the lattice edges (C) and the boards (B). An inward bend slims and lengthens your reflection. An outward bend adds width and heft.