Dremel 3000 Corded Variable Speed Rotary Tool with 1 Attachment and 25 Accessories + Flex Shaft Attachment

Very unhappy w these bosh rotary tools plus servic

I really don’t wanna waste much time on this because I’ve wasted enough time on their products, but you expect quality when you buy Bosch and when my knock off rotary tools outlast and continue to run with the same amount of wear as now four of my Bosch Dremels, it is very concerning. That’s 4 different models and have gotten nothing ignored from the customer service department . Very disappointed !!

The Fantastic Dremel 3000-1/25 Model Making Essen

[This review was collected as part of a promotion.] I do dollhouses and dollhouse furniture, model constructions and miniatures, etc. using wood. My craft workshop includes two Dremel rotary tools (Dremel 395 and 200 working so great) among other Dremel tools (Dremel Moto saw, Dremel Trio, Dremel oscillating tool, etc.), attachments and accessories and this Dremel 3000 is my third Dremel rotary tool bought it 6 years ago. I liked this tool, and it comes in handy for a variety of different use...

Updated Ease Of Use!

[This review was collected as part of a promotion.] I have used a Dremel Rotary Tool in various models for the past 17 years with great success and my general preference has been for the plug in version in my household and artwork uses of my personal Dremel tools. I have tested the Dremel 3000, which I used with the Dremel Chuck attached as personal preference, and a part I have used out of habit since Dremel introduced it to the market. The EZ Twist nose cap works well with the provided colle...

Forget the 3000 model

I bought the 300 model about 15-20 years ago and it still performs better the 5 years old 3000 model. In my opinion the 3000 model was JUNK! I keep putting the new away and going back to the 300 model. It was My mistake buying it as it wa nothing but problems.

Cheaply made, poor attachment integrity

Before any use, I am already out $5! The mandrel that you use to attach cutting wheels to the tool is poorly made. The screw in the mandrel was stuck and I needed a vice grip and a drill to remove it. I could see the crossthread lines - when I googled, I could see this is an extremely common issue. I was unable to screw the piece back into the mandrel head. I also found that the locking mechanism is also poorly made - many on Google had issues with the lock breaking when trying to solve this...

Small, convenient second unit

I have used a Dremel Model 732 with a foot pedal for many years, and it has worked well in my workshop. I bought this Model 3000 to have a lighter, more portable unit that I can take to the garage or my boat. Conveniently, it fits on the same stand I made for the 732. I like the fact that many tools are interchangeable with the small handpiece on the old unit. The 3000 works well, although it lacks the power of my older unit for heavier work.

It does what it says, and more...a lot more.

[This review was collected as part of a promotion.] I never thought I'd find another Dremel that I'd like better than my Multipro 395, but here we are. The model 3000 packs a punch and is similar if not more powerful than my older model. It has a variable speed control and comes with so many accessories you probably won't find a use for all of them. There are a few improvements that are quite noticeable after a few hours of use. I really like the new bell shaped grip. It just feels better and al...

cannot use it out of the box

Why are there no collets included in the box? The only collet required is the largest, and it would not be expensive to include it. Why not state on the box that collets are not included? I had to make extra trips, in winter, to buy kit 4485. It was not available in the store where I bought the Dremel. Perhaps I only need the Dremel chuck, but it is not made clear. What is the purpose of the collet nut that is included? I cannot figure out its use, and I have studied the manual. I have s...

Versatile, comfortable, and easy to use

[This review was collected as part of a promotion.] The Dremel 3000-1/25 Variable Speed is a smooth, comfortable rotary tool that I’ve used on half a dozen things in the last few days. I was able to make a decorative display base for which to showcase a model car (along with Dremel’s plunge router and router bits). I’ve also used it to file away excess wood on a cabinet that wouldn’t close correctly. This tool saved me much time and splinters when I used it to sand some rough edges on freshly...

best arts & crafts tool I've ever had!

[This review was collected as part of a promotion.] the 3000-1/25H is the best tool in my arts & crafts workbench! with the right bit (I often use dental burrs from my orthodontist) I can even carve artsy figures in stones (like agates from the Oregon coast)... and the drill press I also have makes for the most accurate drilling and milling machine for my HO and O scale model railroad and wooden ship-building hobbies... if you're an artist, hobbyist or craftsman, you NEED a Dremel with the Tool ...