Reduce Shopping Trips
Use our Grass Seed Calculator to find out how much seed to buy, and the best grass for your region.
FREE SHIPPING ON QUALIFYING ORDERS $49 OR MORE
Well-established turfgrasses are quite resilient. But even the best-kept lawn can be vulnerable. Learn to recognize, prevent and treat lawn damage and diseases.
Foliar and root diseases can affect both warm- and cool-season grasses. Disease-causing fungi are almost always present in the soil, waiting for a time when conditions are right to attack. The most common times are when the host (turfgrass) is under stress.
Examples of environmental stress are excessively wet or dry weather and exceptionally hot or unseasonably cool temperatures.
In addition to being a reaction to environmental changes, lawn diseases can also be signals of soil problems. Any part of a lawn can be affected. Slopes, depressions, high traffic and shady areas are vulnerable.
Improper mowing or watering habits, too much or too little fertilizer, thatch and compacted soil all increase the chances of disease.
Diseases often start as yellow, tan or brown areas of varying sizes in the lawn. But before you assume you have a lawn disease, make sure it isn't something else. Injury, stress or deficiencies can produce similar symptoms and also set the stage for infection. These are often things that you can control, so it's wise to recognize and remedy these situations. Dormancy in the grass is a natural occurrence and is another factor that can cause discoloration.
To help identify whether the problem is injury, stress or a deficiency, here are some examples and solutions:
Pesticide, fertilizer or gasoline spills
Spills can cause lawn damage quickly, resulting in yellow or brown spots. Refill spreaders, sprayers and outdoor power equipment carefully. Use a funnel or a "no-spill" container. You can rake up dry products and collect them for use later. Flood the area with water to dilute. You need to remove liquid spills with an absorbent product and dispose of the liquid and absorbent properly. Repair and reseed the area as needed.
These spots show up as a dead area with a green ring around it. Flush the area with water as soon as possible after the occurrence (within the hour is best). Work with your dog to use a less conspicuous area.
Aerate to relieve soil compaction and reseed. Redirect the traffic. If that proves impossible, install a walkway.
Mowing Too Close
Raise the mower blade to the proper cutting height for your variety of turfgrass. Fix high spots in the lawn.
Dull mower blade
A mower blade that is not properly sharp can produce a ragged cut and discoloration. Replace or sharpen the blade according to the manufacturer's instructions to prevent ongoing damage.
Aerate to relieve soil compaction. Add organic matter and reseed.
Too much or too little water
If the lawn is not getting enough water, the turfgrass begins to resemble straw. Walking on the lawn leaves footprints in the turf. Water only when needed to prevent overwatering. Do it as early in the day as possible to allow evaporation from grass blades. Be sure to follow any watering ordinances or restrictions for your area.
Too much or too little fertilizer
Too much fertilizer causes excessive growth. Too little does not provide enough nutrition to promote the strong roots, crowns and leaves needed to withstand disease. Follow the proper feeding schedule for your turfgrass.
Excessive pesticide use
Applying too much insecticide or herbicide can "burn" turfgrass and lead to yellow or brown grass. Follow the manufacturer's specifications on amount and frequency of application.
Hot and cold temperature extremes
Wait for a change in the weather. Keep your eyes open for early signals of lawn problems.
Lawns that are not getting enough nitrogen (the key component of lawn fertilizer) will begin to change to light green and then yellow. The color change usually begins to show first in the lower leaves. Reduced growth is also a sign of nitrogen deficiency. Normally the entire lawn is affected. Adding nitrogen will help restore the green color if you fertilize properly. Applying too much at the wrong time can do more harm than good. Follow the package instructions carefully. Grass cycling - leaving grass clippings on your lawn after mowing - adds nitrogen naturally to the lawn.
Another reason for discoloration could be lack of iron in your soil. Some of the more common areas of the yard that you might find turning yellow from iron deficiency are those adjacent to things made of concrete. Driveways, sidewalks and concrete planters can be the culprits. The high alkaline content in concrete tends to absorb the iron found in soil, reducing the amount of iron your lawn or garden receives.
Iron deficiency appears in patches. Blades may yellow but the veins retain their green color. Iron deficiency may not affect growth. Alkaline soils (such as those in the midwestern and western states) are especially susceptible to iron deficiencies. You can add iron as a soil supplement to neutralize alkalinity and help replenish the iron that occurs naturally in the soil. Apply as directed on the package. Remove the product from masonry or concrete surfaces before watering to avoid staining.
In addition to injury, stress and deficiencies, there are other things that may be making your lawn look less than picture perfect.
Damping off is a fungal infection that is usually limited to newly seeded areas. When seeds are sown too densely and then receive too much fertilizer and water, the crowded young seedlings collapse and die. You'll need to rake and reseed the area.
Dormancy is a natural occurrence. Cool-season grasses will turn brown when the weather gets hot and/or dry. Warm-season grasses go dormant when cooler temperatures arrive. They will return to normal conditions when the weather changes. If dormancy occurs late in the growing season, they will remain dormant until the next growing season arrives. Before taking any type of action to solve discoloration, make sure your lawn is not turning yellow or brown because it's going dormant. Dormancy is a resting period – do not fertilize during dormancy.
Insects are another possibility. Signals are holes in the leaves and chewed-off spots. If the turf can be pulled up easily, grubs are the likely culprit (diseased grass remains firmly rooted). Other lawn-harming insects include billbugs, chinch bugs, nematodes, mole crickets, mites, leafhoppers and various larvae. Upon close examination you can see many of these bugs.
When you have eliminated the afflictions mentioned above as possible causes of lawn discoloration, it's time to review the possibility of disease.
Warm season grasses are most susceptible when temperatures are cooler than normal. Cool season grasses are at risk when weather is warmer than normal. Other weather patterns to look for are excessively wet or dry weather and cloudy or overcast skies (which inhibits the ability of grass to dry out sufficiently and means that dew is unable to evaporate). If any of these conditions prevail, then disease is likely.
Identify the problem, find the solution, control the problem and take steps to prevent future occurrences.
Any, but primarily bluegrass and centipedegrass.
Summer and fall.
Irregular-sized tan, brown, reddish-brown patches of grass ranging in size from several inches to several yards. Spots may also be present on grass blades. Can kill turfgrass if left untreated.
Fescue, bluegrass, centipedegrass, ryegrass, St. Augustinegrass, bentgrass, and zoysiagrass.
Spring and fall.
Circular area of dead grass. The circle may be small or large. The outer portion may be a "smoky" color. The leaves can be easily pulled from the stem. Affected areas may have a sunken appearance. Does not usually cause permanent damage.
Bentgrass, bermudagrass, ryegrass, bluegrass and fescue.
Late spring, summer and fall.
Small (silver dollar-sized) spots of tan/brown grass appear over the lawn. The spots may merge into large affected areas. Grass blades will have tan/brown areas on them. Does not usually cause permanent damage.
|Dark green circle or semi-circle of grass. Area next to it may be a lighter-colored area of dying grass. Mushrooms may or may not be present. The entire affected area must be dug up and reseeded.|
|Fusarium blight||Bluegrass||Prompted by hot, dry weather, color transitions from light green to brown to tan before dying.|
|Fusarium patch/snow mold|
Cool-season grasses and zoysiagrass.
Fall, winter and spring.
Fusarium patch (or pink snow mold) usually occurs after snow melts but can be caused by cold, wet weather at other times. Starts as greenish yellow but turns a distinctive pink shade.
Gray color indicates another snow mold variety that matures under snow layers during colder winters. It also starts with a yellow tint but runs grayish white.
Spring, summer and fall.
|There are leaf spot infections that attack warm- and cool-season grasses. Grass begins to appear gray, tan or brown. Upon closer examination, tan, red or purple spots are evident. Can severely thin or kill turfgrass.|
|Necrotic ring spot/summer patch|
Bluegrass, bentgrass, bermudagrass and fescue.
Spring, summer and fall.
Round, sunken areas of reddish-tan grass that resembles a bull's eye. The very similar summer patch takes a more oval or irregular shape.
Bluegrass, bermudagrass and zoysiagrass.
|Common in shady areas, the infection resembles white dust. Blades eventually turn tan to brown. The damage can be permanent.|
|Pythium blight||All turfgrasses||Also called grease spot due to the brown slimy areas it produces. White patches may also appear. Can spread and kill grass quickly.|
|Fescue, bluegrass, ryegrass and bentgrass.|
Red or faded patches, reddish or pink threads reach from leaf tips to adjoining leaves. Damage is usually not permanent.
Bluegrass, bermudagrass, St. Augustinegrass and ryegrass.
Summer and fall.
Distinctive orange rust-like appearance. The spores will attach easily to tools and clothing. Not usually harmful.
Summer and fall.
Patches of white/gray/black deposits on leaves. May appear powdery in early stages. Forms tiny balls as the infections matures. Slime molds will not cause permanent damage, but they can inhibit growth if the infestation is heavy. Remove with a rake, broom or by spraying with a garden hose.
Bluegrass and bentgrass.
Spring and fall.
|Yellowing blades turn to black and begin to curl. The entire plant is affected and is likely to die.|
To prevent disease from spreading, remove grass clippings from infected areas. Avoid walking through the area and clean any tools you have used before they come in contact with other parts of the lawn.
Apply fungicides when needed. Make sure you choose one that's formulated for the specific disease that's affecting your lawn. Follow the manufacturer's instructions carefully.
Frequent applications of fungicide can have an adverse effect - over time, many diseases will develop a resistance to them. Spot-treat affected areas rather than the entire lawn. Alternate fungicidal products to maintain efficiency. Some fungicidal remedies can be applied only by a licensed pesticide applicator.
General lawn care practices create a healthy stand of turf. There is no better way to prevent disease, weeds and pests. To achieve that goal: