Reduce Shopping Trips
Use our Grass Seed Calculator to find out how much seed to buy, and the best grass for your region.
FREE SHIPPING ON QUALIFYING ORDERS $49 OR MORE.
Take down weeds and stray grass with a power lawn edger. A power lawn edger creates a professional, sharp edge around sidewalks, driveways, gardens and other landscape features. Edging isn't difficult or time consuming; all you need to have your lawn looking great is the right edger and the right technique.
Use this checklist when you go to the store and purchase your items.
Select a power lawn edger that will best handle the type of work you'll be doing.
Electric-powered edgers are easy to start and don't require as much maintenance as gas-powered models. Cordless edgers offer easy mobility for smaller jobs. Corded edgers offer unlimited run time and require a suitable extension cord. Follow the edger manufacturer's instructions for selecting compatible extension cords. See Power Cord Safety Tips.
Gas-powered edgers provide power for large jobs and prolonged use. Models with 2-cycle engines run on a gasoline / oil mixture. Edgers with 4-cycle engines are usually larger and have more power. They don't require you to mix gasoline and oil. Gasoline lawn edgers crank with a pull-start. Some models have a built-in electric starter, while others can crank with the use of an optional, powered starting device that you purchase separately.
Power lawn edgers cut using either a blade, a cutting wheel or, in the case of a string trimmer / edger device, a monofilament line.
Some features to look for on a power lawn edger include:
Edging doesn't have to be done weekly – every other week is typically enough. These steps outline using a gas-powered lawn edger. Modify them as needed for an electric-powered model. All edgers work similarly, depending on options, but follow the operating instructions for your specific model.
Position the lawn edger near your starting point. To get an even cut, run the wheels of the edger on the concrete (or other smooth surface) side of your edging project whenever possible. Where there is no hard surface, you can run the wheels on grass or planting beds.
Set the depth control at "Start" or at the shallowest setting (follow the manufacturer’s directions).
Start the edger according to the manufacturer's directions. On some edgers, you have to squeeze the blade control while starting the engine and to keep it running.
Slowly cut into the grass and work along the path, moving the machine back and forth.
After cutting a line, adjust to a deeper setting, and go over the edge again. Move slowly, letting the machine do the work.
To stop the machine, release the blade control handle or press the "Stop" button, depending on the model. Manufacturers of some gas-powered models instruct you to let the engine idle to cool down before turning it off.
Before storing your edger, make sure you let it cool off. Use a brush to remove any clippings and debris. Don't spray the unit with water or other cleaners, as these may damage it. Store your lawn edger somewhere dry and out of reach of children, pets and possible damage.
Maintenance is an important part of keeping your lawn edger cutting, so check your owner’s manual for the maintenance schedule. Typical items include:
Additional maintenance items for gas-powered edgers include: