FREE SHIPPING on Qualifying Orders $49 or More.
Cleaning roof gutters is a small task that can prevent big problems. Follow these simple steps for cleaning your home’s gutters and making simple gutter repairs.
Product costs, availability and item numbers may vary online or by market.
Missing anything? Shop Online
Thoroughly cleaning your home’s gutters every spring and fall will keep them working like they should. Leaves can build up and clog the downspouts, which can cause water damage to your roof and fascia (the board behind the gutter). Water pouring over the gutters or from leaks can end up next to your home’s foundation, in the basement or crawlspace.
Check the weather forecast before cleaning gutters. Cleaning will be easier if you allow debris in gutters to dry out.
Cleaning or attempting to repair your gutters from on top of the roof is not recommended. Clean your gutters while standing firmly on a ladder. Avoid standing on the top three rungs and don't reach past the side rail – no farther than your belt buckle. When working from a ladder, use one bucket for gutter debris and another for carrying tools. Use wire hooks to attach the buckets to the ladder. Make sure the area below the gutter is clear.
A hose-end attachment specially designed for gutters may make this project a lot easier. If you need to clean from a ladder, follow these steps.
Begin cleaning the gutter near a downspout.
Remove the large debris (leaves, twigs, etc.) with a trowel and dump it in a bucket.
To clean out finer materials, flush the gutter lengths with a hose starting at the end opposite the downspout. Alternatively, you can use a gutter-cleaning attachment on a hose. If the water doesn’t drain, recheck the downspout strainer and clean as necessary.
If gutter water still doesn’t drain, the downspout may be clogged.
If there's still standing water after the gutter has been flushed, the gutter may not be sloped correctly and will require adjustment. The length of the system should decline at least ¼ inch every 10 feet toward the downspout.
If the gutter doesn’t slope enough, detach the hangers and adjust the gutter enough to drain properly, then reattach. It may be easier to work on small sections at a time to prevent the entire gutter system from falling.
Inspect the gutter sections and downspouts for obvious damage and missing parts. Support hangers should be spaced every 2 feet along the gutter.
To replace or add hangers:
Repair any leaks in the gutter.
Apply gutter touch-up paint to cover any blemishes as desired. If necessary, repaint some or all of the gutters.
Identify gutter leaks by filling the gutter with water, but make sure the gutters have dried before repairing.