The Edsal UR2460 five-shelf standing shelf unit has a 16-gauge steel rack and shelves made of particle board to support a 700 lb. per shelf capacity. This unit has double-riveted beams that lock into double-rivet holes on the corner post for structural security. The corner post rivet holes on this unit are punched at 1-1/2 In. intervals for precise adjustment to desired shelf height. The steel rack has a gray enamel finish to resist corrosion. This unit is open on all four sides to facilitate access to shelf contents from any angle. The posts on this unit have a two-piece design so it can be assembled vertically to create one 72 x 60 x 24 In. (H x W x D) unit, or assembled horizontally to create one 36 x 60 x 24 In. unit with two shelves, and one 36 x 60 x 24 In. unit with three shelves. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) this shelf unit has a rivet lock design for Boltless assembly. Assembly instructions are included. A rubber mallet (sold separately) is recommended for assembly.
Rivet shelving has a two-piece post system allows you to create the work center you need
700 lbs capacity per shelf
Unique double-riveted beams lock into corner post to form a structurally secure joint
Rust and corrosion-resistant; baked-on grey enamel finish