You're watching Video 4.
Welcome to Step 4 of the LCI Shop Class! We're putting the finishing touches on our project in this step. Visit the Shop Class homepage to view the complete video series.
All right, let's get started!
Part 4
4. Attach the seat slats, and apply finishing touches.
Note: The (10) seat slats are ripped from a 1 x 6.
a. Use a router fitted with a 1/4-inch roundover bit to round over the top long edges of each (10) seatslat.
b. Attach the (10) seat slats to the leg assemblies as shown in Figure 6.
c. Fill pocket holes with wood filler. Prime and paint as desired.
d. Attach nail-on furniture glides to the bottoms of the leg assemblies.
Illustration
Cut List
| Part | Material | Size | Quantity | Notes |
|---|---|---|---|---|
| A legs | 1 x 6 x 12 | 3/4 x 5-1/4 x 36 | 2 | |
| B legs | 2 x 4 | 1-1/2 x 3-1/2 x 20-1/4 | 2 | |
| Leg brace | 1 x 4 x 8 | 3/4 x 3-1/2 x 21 | 1 | |
| Back leg brace | 1 x 4 x 8 | 3/4 x 3-1/2 x 22-1/2 | 1 | |
| Back slats | 1 x 4 x 8; 1 x 4 x 10 | 3/4 x 3-1/2 x 36 | 5 | |
| Back slat braces | 1 x 4 x 10 | 3/4 x 3-1/2 x 21 | 2 | |
| Arm support | 1 x 4 x 10 | 3/4 x 3-1/2 x 29 | 1 | |
| Arms | 1 x 6 x 12 | 3/4 x 5-1/4 x 31 | 2 | |
| Arm braces | 1 x 4 x 8 | 3/4 x 3-1/2 x 6 | 2 | |
| Seat slats | 1 x 6 x 10 | 3/4 x 1-1/2 x 22-1/2 | 15 | |
Finished Dimensions
| ||||
Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.